path: root/build.xml

<?xml version="1.0"?>

<project name="j3d-1.5.2" default="jar-debug" basedir=".">

  <!--
  *********************************************************************
  *
  * The following properties may be set on the command line to
  * specify the compiler used or the renderer to be built. They are
  * specified using "ant -Dprop.name=value", where the actual
  * property and and value are substituted for "prop.name" and
  * "value"
  *
  *   build.comp=gcc    Use GCC compilers (default, all platforms)
  *   build.comp=forte  Use Forte compilers (Solaris only)
  *   build.comp=vc     Use Visual C++ compilers (Windows only)
  *
  *   build.rend=ogl    build OpenGL native library (default)
  *   build.rend=d3d    build DirectX (D3D) native library
  *
  * For example:
  *
  *   ant -Dbuild.comp=vc -Dbuild.rend=d3d ...
  *
  *********************************************************************
  -->

  <!-- *************************************** -->
  <!-- *** Begin build-specific properties *** -->
  <!-- *************************************** -->

  <!--
  * The following property specifies the build number of the current
  * version of 3D being built. This build number is a monotonically
  * increasing number that is incremented for each new stable, beta,
  * fcs, or patch build.  Each non-daily build will have a unique
  * build number that is greater than the previous build's build
  * number.
  -->
  <property name="version_buildnum"   value="3"/>

  <!--
  * The following property specifies the beta revision of the current
  * version of 3D being built. It is ignored for non-beta builds.
  -->
  <property name="version_betastr"    value="beta2"/>

  <!--
  * The following property specifies the patch revision of the current
  * version of 3D being built. It is ignored for non-beta builds.
  -->
  <property name="version_patchstr"   value="01"/>

  <!--
  * The following properties specify the current version of 3D.
  * The "version_base" property specifies the dot-dot base version
  * number of 3D; it must contain exactly three integer numbers
  * separated by "periods ("."). The version_base_file property must
  * be the same version number as version_base with "_" replacing ".".
  -->
  <property name="version_base"       value="1.5.2"/>
  <property name="version_base_file"  value="1_5_2"/>


  <!-- ************************************* -->
  <!-- *** End build-specific properties *** -->
  <!-- ************************************* -->

  <!--
  *********************************************************************
  *
  * A build of j3d is one of the following five types: daily
  * build, stable build, beta build (or release candidate), fcs build,
  * patch build. Daily builds are identified with a "-preN-YYMMDDHHMM"
  * suffix; stable builds are identified with a "-buildN" suffix; beta
  * builds are identified with a "-betaN" or "-rcN" suffix; fcs builds
  * have no suffix; and patch builds are identified with an "_N"
  * suffix.
  *
  * The default is to do a daily build. This may be overriden by setting
  * the build.type property on the command line to do a different kind
  * of build:
  *
  *   build.type=daily   Do a daily build (default)
  *   build.type=stable  Do a stable build : -buildN
  *   build.type=beta    Do a beta or RC production build : -betaN or -rcN
  *   build.type=fcs     Do an FCS production build : [no suffix]
  *   build.type=patch   Do an FCS+patch production build : _PP
  *
  * For example:
  *
  *   ant -Dbuild.type=stable ...
  *
  *********************************************************************
  -->

  <!-- Set global properties for this build -->
  <property name="vecmath_home" location="../vecmath"/>
  <property name="core_utils_home" location="../j3d-core-utils"/>

  <property name="src"     location="src"/>
  <property name="vecmath_src" location="${vecmath_home}/src"/>
  <property name="core_utils_src" location="${core_utils_home}/src"/>
  <property name="build-tools" location="build-tools"/>
  <property name="build"   location="build"/>
  <property name="dist"    location="dist"/>
  <property name="build.comp" value="gcc"/>
  <property name="build.rend" value="ogl"/>

  <property name="build.spec.title" value="3D Graphics API for the Java Platform"/>
  <property name="build.impl.title" value="3D Graphics API for the Java Platform"/>
  <property name="build.spec.vendor" value=""/>
  <property name="build.impl.vendor" value=""/>
  <property name="build.impl.vendor.id" value=""/>
  <property name="build.javadoc.name" value="3D"/>
  <property name="build.relprefix" value="j3d"/>

  <target name="echo" depends="setupPlatform">	
    <echo message="platform        = ${platform}"/>
    <echo message="wstype          = ${wstype}"/>
    <echo message="os.arch         = ${os.arch}"/>
    <echo message="os.name         = ${os.name}"/>	
    <echo message="ant.home        = ${ant.home}"/>
    <echo message="java.home       = ${java.home}"/>
    <echo message="core_utils_home = ${core_utils_home}"/>
    <echo message="vecmath_home    = ${vecmath_home}"/>
    <echo message="user.name       = ${user.name}"/>
    <echo message="user.home       = ${user.home}"/>

    <echo message=""/>
    <echo message="build.type      = ${build.type}"/>
    <echo message="build.rend      = ${build.rend}"/>
    <echo message="build.comp      = ${build.comp}"/>
    <echo message="is_dev_phase    = ${is_dev_phase}"/>
    <echo message="is_production   = ${is_production}"/>
    <echo message="use_verbose_buildtime = ${use_verbose_buildtime}"/>

    <echo message="version_build   = ${version_build}"/>
    <echo message="version_suffix  = ${version_suffix}"/>

    <echo message="version         = ${version}"/>
    <echo message="version_file    = ${version_file}"/>
  </target>

  <target name="setupSolaris" if="isSolarisOnSparc">
    <property name="isUnix" value="true"/>
    <property name="shell" value="/usr/bin/ksh"/>
    <property name="wstype" value="x11"/>
    <property name="platformname" value="solaris-sparc"/>
    <property name="platform" value="solaris-sparc-${build.comp}"/>
    <property name="install.bin" value="lib/sparc"/>
  </target>

  <target name="setupSolarisX86" if="isSolarisOnX86">
    <property name="isUnix" value="true"/>
    <property name="shell" value="/usr/bin/ksh"/>
    <property name="wstype" value="x11"/>
    <property name="platformname" value="solaris-x86"/>
    <property name="platform" value="solaris-x86-${build.comp}"/>
    <property name="install.bin" value="lib/i386"/>
  </target>

  <target name="setupLinux" if="isLinuxOnX86">	
    <property name="isUnix" value="true"/>
    <property name="shell" value="/bin/sh"/>
    <property name="wstype" value="x11"/>
    <property name="platformname" value="linux-i586"/>
    <property name="platform" value="linux-i586"/>
    <property name="install.bin" value="lib/i386"/>
  </target>

  <target name="setupLinuxAmd64" if="isLinuxOnAmd64">
    <property name="isUnix" value="true"/>
    <property name="shell" value="/bin/sh"/>
    <property name="wstype" value="x11"/>
    <property name="platformname" value="linux-amd64"/>
    <property name="platform" value="linux-amd64"/>
    <property name="install.bin" value="lib/amd64"/>
  </target>

  <target name="setupLinuxIA64" if="isLinuxOnIA64">
    <property name="isUnix" value="true"/>
    <property name="shell" value="/bin/sh"/>
    <property name="wstype" value="x11"/>
    <property name="platformname" value="linux-ia64"/>
    <property name="platform" value="linux-ia64"/>
    <property name="install.bin" value="lib/ia64"/>
  </target>

  <target name="setupLinuxPPC" if="isLinuxOnPPC">
    <property name="isUnix" value="true"/>
    <property name="shell" value="/bin/sh"/>
    <property name="wstype" value="x11"/>
    <property name="platformname" value="linux-ppc"/>
    <property name="platform" value="linux-ppc"/>
    <property name="install.bin" value="lib/ppc"/>
  </target>

    <!-- win32 should be rename as windows -->
  <target name="setupWindows" if="isWindowsOnX86">
    <property name="isWindows" value="true"/>
    <property name="wstype" value="win32"/>
    <property name="platformname" value="windows-i586"/>
    <property name="platform" value="windows-i586-${build.comp}"/>
    <property name="install.bin" value="bin"/>
  </target>

  <target name="setupWindowsAmd64" if="isWindowsOnAmd64">
    <property name="isWindows" value="true"/>
    <property name="wstype" value="win32"/>
    <property name="platformname" value="windows-amd64"/>
    <property name="platform" value="windows-amd64-${build.comp}"/>
    <property name="install.bin" value="bin"/>
  </target>

  <target name="setupMacOSX" if="isMacOSX">
    <property name="wstype" value="jogl"/>
    <property name="platformname" value="macosx"/>
    <property name="platform" value="macosx"/>
  </target>

  <target name="init-jogl" if="build.jogl">
    <property name="jogl.pipeline.srcdir" location="${src}/classes/jogl"/>
    <echo message="Building JoglPipeline"/>
  </target>

  <target name="init-no-jogl" unless="build.jogl">
    <property name="jogl.pipeline.srcdir" value=""/>
  </target>

  <target name="setupJogl" depends="init-jogl,init-no-jogl">
  </target>

  <target name="setupPlatform"
       depends="init, setupBuildType, setupSolaris, setupSolarisX86, setupLinux, setupLinuxAmd64, setupLinuxIA64, setupLinuxPPC, setupWindows, setupWindowsAmd64, setupMacOSX, setupJogl">
    <property name="build-debug-gen" location="${build}/${platform}/debug/gen"/>
    <property name="build-opt-gen" location="${build}/${platform}/opt/gen"/>
    <property name="docname" value="${build.relprefix}-${version_file}-doc"/>
  </target>


  <target name="setupBuildType" depends="initBuildType, setupBuildPatch, setupBuildFcs, setupBuildBeta, setupBuildStable, setupBuildDaily, checkBuildType">
    <echo message="build.type = ${build.type}"/>
  </target>

  <target name="initBuildType">
    <!-- Default value is "daily", overridden on command line -->
    <property name="build.type" value="daily"/>
    <property name="buildType_${build.type}" value="true"/>
  </target>


  <!-- Set properties for PATCH build -->
  <target name="setupBuildPatch" if="buildType_patch">
    <property name="buildTypeSet" value="true"/>

    <property name="releaseType_final" value="true"/>
    <property name="is_dev_phase" value="false"/>
    <property name="is_production" value="true"/>
    <property name="use_verbose_buildtime" value="false"/>

    <property name="version_build" value="build${version_buildnum}"/>
    <property name="version_suffix" value="${version_patchstr}"/>

    <property name="version" value="${version_base}_${version_suffix}"/>
    <property name="version_file" value="${version_base_file}_${version_suffix}"/>
  </target>


  <!-- Set properties for FCS build -->
  <target name="setupBuildFcs" if="buildType_fcs">
    <property name="buildTypeSet" value="true"/>

    <property name="releaseType_final" value="true"/>
    <property name="is_dev_phase" value="false"/>
    <property name="is_production" value="true"/>
    <property name="use_verbose_buildtime" value="false"/>

    <property name="version_build" value="build${version_buildnum}"/>
    <property name="version_suffix" value=""/>

    <property name="version" value="${version_base}"/>
    <property name="version_file" value="${version_base_file}"/>
  </target>


  <!-- Set properties for BETA build -->
  <target name="setupBuildBeta" if="buildType_beta">
    <property name="buildTypeSet" value="true"/>

    <property name="releaseType_milestone" value="true"/>
    <property name="releaseType_dailyOrMilestone" value="true"/>
    <property name="is_dev_phase" value="false"/>
    <property name="is_production" value="true"/>
    <property name="use_verbose_buildtime" value="true"/>

    <property name="version_build" value="build${version_buildnum}"/>
    <property name="version_suffix" value="${version_betastr}"/>

    <property name="version" value="${version_base}-${version_suffix}"/>
    <property name="version_file" value="${version_base_file}-${version_suffix}"/>
  </target>


  <!-- Set properties for STABLE build -->
  <target name="setupBuildStable" if="buildType_stable">
    <property name="buildTypeSet" value="true"/>

    <property name="releaseType_milestone" value="true"/>
    <property name="releaseType_dailyOrMilestone" value="true"/>
    <property name="is_dev_phase" value="true"/>
    <property name="is_production" value="false"/>
    <property name="use_verbose_buildtime" value="true"/>

    <property name="version_build" value="build${version_buildnum}"/>
    <property name="version_suffix" value="${version_build}"/>

    <property name="version" value="${version_base}-${version_suffix}"/>
    <property name="version_file" value="${version_base_file}-${version_suffix}"/>
  </target>


  <!-- Set properties for DAILY build -->
  <target name="setupBuildDaily" if="buildType_daily">
    <property name="buildTypeSet" value="true"/>

    <property name="releaseType_daily" value="true"/>
    <property name="releaseType_dailyOrMilestone" value="true"/>
    <property name="is_dev_phase" value="true"/>
    <property name="is_production" value="false"/>
    <property name="use_verbose_buildtime" value="true"/>

    <property name="version_build" value="pre${version_buildnum}"/>
    <property name="version_suffix" value="${version_build}"/>

    <property name="version" value="${version_base}-${version_suffix}-${buildtime}"/>
    <property name="version_file" value="${version_base_file}-${version_suffix}-${buildtime}"/>
  </target>


  <!-- Check buildType -->
  <target name="checkBuildType" unless="buildTypeSet">
    <fail message="Unknown build.type = ${build.type}"/>
  </target>


  <target name="init">
    <!-- Create the time stamp -->
    <tstamp>
        <format property="buildtime_verbose" pattern="dd MMM yyyy HH:mm:ss z"/>
        <format property="buildtime" pattern="yyMMddHHmm"/>
    </tstamp>
  
    <echo message="buildtime = ${buildtime_verbose}"/>

    <!-- Create the base build directory -->
    <mkdir dir="${build}"/>

    <!-- ========== determine platform ========== -->
    <condition property="isWindowsOnX86">
	<os family="windows" arch="x86"/>
    </condition> 


    <condition property="isWindowsOnAmd64">
	<os family="windows" arch="amd64"/>
    </condition> 

    <condition property="isLinuxOnX86">
        <os name="linux" arch="i386"/>
    </condition>

    <condition property="isLinuxOnAmd64">
        <os name="linux" arch="amd64"/>
    </condition>

    <condition property="isLinuxOnIA64">
        <os name="linux" arch="ia64"/>
    </condition>
    
    <condition property="isLinuxOnPPC">
        <os name="linux" arch="ppc"/>
    </condition>

    <condition property="isSolarisOnSparc">
        <os name="SunOS" arch="sparc"/>
    </condition>   

    <condition property="isSolarisOnX86">
        <os name="SunOS" arch="x86"/>
    </condition>

    <condition property="isa_amd64">
      <contains string="${sun.cpu.isalist}" substring="amd64"/>
    </condition>

    <condition property="isMacOSX">
      <and>
        <os family="mac"/>
        <os family="unix"/>
      </and>
    </condition> 

    <available file="${java.home}/lib/amd64/libjawt.so" property="jre_amd64_present"/>

    <!-- flag indicating that a 64-bit JVM is available for Solaris/x86 -->
    <condition property="isSolarisOnX86_64">
      <and>
        <isset property="isSolarisOnX86"/>
        <isset property="isa_amd64"/>
        <isset property="jre_amd64_present"/>
      </and>
    </condition>

  </target>

  <target name="compile-debug" depends="setupPlatform">
<!--	<ant dir="${vecmath_home}" target="jar-debug"/>-->
	<ant dir="src/classes" target="compile-debug"/>
        <antcall target="compile-debug-native"/>
  </target>
  
  <target name="compile-debug-native" unless="build.javaonly">
	<ant dir="src/native" target="compile-debug"/>
  </target>

  <target name="compile-opt" depends="setupPlatform">
<!--	<ant dir="${vecmath_home}" target="jar-opt"/>-->
	<ant dir="src/classes" target="compile-opt"/>
        <antcall target="compile-opt-native"/>
  </target>
  
  <target name="compile-opt-native" unless="build.javaonly">
	<ant dir="src/native" target="compile-opt"/>
  </target>

  <target name="compile" depends="compile-debug,compile-opt" />

  <target name="jar-debug" depends="compile-debug">
	<ant dir="src/classes" target="jar-debug"/>
  </target>
  
  <target name="jar-debug-javaonly">
        <property name="build.javaonly" value="true"/>
        <antcall target="jar-debug"/>
  </target>

  <target name="jar-opt" depends="compile-opt">
	<ant dir="src/classes" target="jar-opt"/>
  </target>

  <target name="jar-opt-javaonly">
        <property name="build.javaonly" value="true"/>
        <antcall target="jar-opt"/>
  </target>

  <target name="jar" depends="jar-debug,jar-opt" />

  <target name="docs-jcp" depends="setupPlatform">
	<ant dir="src/classes" target="docs-jcp"/>
  </target>

  <target name="docs-public" depends="setupPlatform" unless="nojavadoc">
	<ant dir="src/classes" target="docs-public"/>
  </target>

  <target name="docs-private" depends="setupPlatform">
	<ant dir="src/classes" target="docs-private"/>
  </target>

  <target name="docs" depends="setupPlatform">
	<ant dir="src/classes" target="docs"/>
  </target>

  <target name="setupCheckBuild" depends="setupPlatform">
    <available file="${build}/linux-i586/opt/lib/ext/j3dcore.jar" property="buildLinuxFilesExist"/>
    <available file="${build}/windows-i586-vc/opt/lib/ext/j3dcore.jar" property="buildWindowsFilesExist"/>
  </target>

  <target name="checkBuildLinux" unless="buildLinuxFilesExist">
      <fail message="You must run the jar-opt target on Linux before running dist-common" />
  </target>

  <target name="checkBuildWindows" unless="buildWindowsFilesExist">
      <fail message="You must run the jar-opt target on Windows before running dist-common" />
  </target>
  
  <target name="checkBuildPlatform" unless="isLinuxOnX86">
      <fail message="You must run the dist-common target on linux-i586 platform" />
  </target>

  <target name="checkBuild" depends="setupCheckBuild,checkBuildPlatform,checkBuildLinux,checkBuildWindows">
  </target>

  <target name="dist-common" depends="setupPlatform,checkBuild">
	<ant dir="src/classes" target="dist-common"/>
  </target>

  <target name="setupCheckDist" depends="setupPlatform">
    <available file="${dist}/common/lib/ext/j3dcore.jar" property="distCommonFilesExist"/>
  </target>

  <target name="checkDistCommon" unless="distCommonFilesExist">
      <fail message="You must run the dist-common target before running dist" />
  </target>

  <target name="checkDist" depends="setupCheckDist,checkDistCommon">
  </target>

  <!-- NOTE: the dist target no longer depends on jar-opt; you must run the
       jar-opt and dist-common (linux-only) targets prior to dist -->
  <target name="dist" depends="setupPlatform,checkDist,src">
	<ant dir="src/classes" target="dist"/>
	<ant dir="src/native" target="dist"/>
  </target>

  <!-- NOTE: the all target no longer depends on dist, which must be run separately -->
  <target name="all" depends="jar,docs"/>

  <target name="release" description="Package distribution for release"
	depends="dist,init-release,release-daily,release-milestone,release-final">
  </target>

  <target name="init-release">
      <property name="platformTmp" location="${dist}/${platform}/tmp"/>
      <property name="platformTmpBund" location="${platformTmp}/bund"/>
      <property name="platformTmpInst" location="${platformTmp}/inst"/>
      <property name="release_name" value="${build.relprefix}-${version_file}-${platformname}"/>
      <property name="inst_name" value="j3d-instfiles-${version_file}-${platformname}"/>
      <mkdir dir="${dist}/release"/>
  </target>

  <target name="release-daily" depends="init-release,release-zip-bund-pre" if="releaseType_daily">
  </target>
  
  <target name="release-zip-bund-pre" if="releaseType_dailyOrMilestone">
      <mkdir dir="${platformTmpBund}/${release_name}"/>

      <zip destfile="${platformTmpBund}/${release_name}/j3d-jre.zip">
          <fileset dir="${dist}/${platform}"
              includes="lib/**"
          />
          <fileset dir="${dist}/${platform}"
              includes="bin/**"
          />
      </zip>
      <copy todir="${platformTmpBund}/${release_name}">
          <fileset dir="." includes="COPYRIGHT.txt"/>
          <fileset dir="release-info/pre-release"
              includes="LICENSE*.txt README*.txt README-unzip.html"
          />
      </copy>
      <zip destfile="${dist}/release/${release_name}.zip">
          <fileset dir="${platformTmpBund}"
              includes="${release_name}/**"
          />
      </zip>
  </target>

  <target name="release-milestone" depends="init-release,release-zip-bund-pre,release-zip-inst-pre" if="releaseType_milestone">
  </target>

  <target name="release-zip-inst-pre" if="releaseType_milestone">
      <antcall target="release-zip-inst-pre-unix"/>
      <antcall target="release-zip-inst-pre-windows"/>
  </target>

  <target name="release-zip-inst-pre-unix" if="isUnix">
    <mkdir dir="${platformTmpInst}/${release_name}"/>

    <copy todir="${platformTmpInst}/${release_name}">
      <fileset dir="${dist}/${platform}"
          includes="lib/**"/>
      <fileset dir="${dist}/${platform}"
          includes="bin/**"/>
    </copy>

    <copy tofile="${platformTmpInst}/${release_name}/LICENSE.txt">
      <fileset dir="release-info/pre-release"
        includes="LICENSE*.txt"/>
    </copy>

    <chmod dir="${platformTmpInst}/${release_name}" perm="755"
       includes="**/*.so"/>

    <copy todir="${platformTmpInst}">
        <fileset dir="${build-tools}/${platformname}"
            includes="script*.txt, unzipsfx"/>
    </copy>

    <exec dir="${platformTmpInst}/${release_name}" executable="${shell}">
      <arg line="${build-tools}/genzip ${release_name} LICENSE.txt lib"/>
    </exec>

    <copy file="${platformTmpInst}/${release_name}.bin" todir="${dist}/release"/>

    <chmod file="${dist}/release/${release_name}.bin" perm="755"/>
  </target>

  <target name="release-zip-inst-pre-windows" if="isWindows">
    <property name="tmpInstDir" location="${platformTmpInst}/${inst_name}"/>
    <mkdir dir="${tmpInstDir}/j3d-binaries"/>

    <copy todir="${tmpInstDir}">
      <fileset dir="release-info/pre-release"
        includes="LICENSE*.rtf README.html"/>
    </copy>

    <copy todir="${tmpInstDir}/j3d-binaries">
      <fileset dir="${dist}/${platform}"
          includes="lib/**"/>
      <fileset dir="${dist}/${platform}"
          includes="bin/**"/>
    </copy>

    <chmod dir="${tmpInstDir}/j3d-binaries" perm="755"
       includes="**/*.dll"/>

    <zip destfile="${dist}/release/${inst_name}.zip">
      <fileset dir="${platformTmpInst}"
          includes="${inst_name}/**"/>
    </zip>
  </target>

  <target name="release-final" depends="init-release,release-zip-bund-final,release-zip-inst-final" if="releaseType_final">
  </target>

  <target name="release-zip-bund-final" if="releaseType_final">
      <mkdir dir="${platformTmpBund}/${release_name}"/>

      <zip destfile="${platformTmpBund}/${release_name}/j3d-jre.zip">
          <fileset dir="${dist}/${platform}"
              includes="lib/**"
          />
          <fileset dir="${dist}/${platform}"
              includes="bin/**"
          />
      </zip>
      <copy todir="${platformTmpBund}/${release_name}">
          <fileset dir="." includes="COPYRIGHT.txt"/>
          <fileset dir="release-info/fcs-${version_base_file}"
              includes="LICENSE*.txt README*.txt README-unzip.html"
          />
      </copy>
      <zip destfile="${dist}/release/${release_name}.zip">
          <fileset dir="${platformTmpBund}"
              includes="${release_name}/**"
          />
      </zip>
  </target>

  <target name="release-zip-inst-final" if="releaseType_final">
      <antcall target="release-zip-inst-final-unix"/>
      <antcall target="release-zip-inst-final-windows"/>
  </target>

  <target name="release-zip-inst-final-unix" if="isUnix">
    <mkdir dir="${platformTmpInst}/${release_name}"/>

    <copy todir="${platformTmpInst}/${release_name}">
      <fileset dir="${dist}/${platform}"
          includes="lib/**"/>
      <fileset dir="${dist}/${platform}"
          includes="bin/**"/>
    </copy>

    <copy tofile="${platformTmpInst}/${release_name}/LICENSE.txt">
      <fileset dir="release-info/fcs-${version_base_file}"
        includes="LICENSE*.txt"/>
    </copy>

    <chmod dir="${platformTmpInst}/${release_name}" perm="755"
       includes="**/*.so"/>

    <copy todir="${platformTmpInst}">
        <fileset dir="${build-tools}/${platformname}"
            includes="script*.txt, unzipsfx"/>
    </copy>

    <exec dir="${platformTmpInst}/${release_name}" executable="${shell}">
      <arg line="${build-tools}/genzip ${release_name} LICENSE.txt lib"/>
    </exec>

    <copy file="${platformTmpInst}/${release_name}.bin" todir="${dist}/release"/>

    <chmod file="${dist}/release/${release_name}.bin" perm="755"/>
  </target>

  <target name="release-zip-inst-final-windows" if="isWindows">
    <property name="tmpInstDir" location="${platformTmpInst}/${inst_name}"/>
    <mkdir dir="${tmpInstDir}/j3d-binaries"/>

    <copy todir="${tmpInstDir}">
      <fileset dir="release-info/fcs-${version_base_file}"
        includes="LICENSE*.rtf README.html"/>
    </copy>

    <copy todir="${tmpInstDir}/j3d-binaries">
      <fileset dir="${dist}/${platform}"
          includes="lib/**"/>
      <fileset dir="${dist}/${platform}"
          includes="bin/**"/>
    </copy>

    <chmod dir="${tmpInstDir}/j3d-binaries" perm="755"
       includes="**/*.dll"/>

    <zip destfile="${dist}/release/${inst_name}.zip">
      <fileset dir="${platformTmpInst}"
          includes="${inst_name}/**"/>
    </zip>
  </target>

  <target name="initSrc" depends="setupPlatform">
      <property name="platformSrc" location="${dist}/${platform}/src"/>
      <property name="j3dZip" value="j3d-${version_file}-src.zip"/>
      <property name="vecmathZip" value="vecmath-${version_file}-src.zip"/>

      <property name="j3dZipFile" location="${platformSrc}/${j3dZip}"/>
      <property name="vecmathZipFile" location="${platformSrc}/${vecmathZip}"/>
      <property name="cvsRootDir" location=".."/>

      <mkdir dir="${platformSrc}"/>
  </target>

  <target name="echoSrc"> 
    <echo message="j3dZipFile = ${j3dZipFile}"/>
    <echo message="vecmathZipFile = ${vecmathZipFile}"/>
    <echo message="cvsRootDir = ${cvsRootDir}"/>
  </target>

  <target name="src" depends="initSrc, echoSrc, j3dSrc, vecmathSrc">
  </target>

  <target name="j3dSrc">
    <zip destfile="${j3dZipFile}">

      <fileset dir="${cvsRootDir}/j3d-core/release-info/src-release/j3d"
          includes="README.txt"/>
     
      <zipfileset dir="${cvsRootDir}/j3d-core" prefix="javax"
          includes="COPYRIGHT.txt *LICENSE*.*"/>

      <fileset dir="${cvsRootDir}/j3d-core/src/classes/share"
          includes="*/**"
          excludes="**/doc-files/** **/package.html"/>

      <fileset dir="${cvsRootDir}/j3d-core/src/classes/jogl"
          includes="*/**"
          excludes="**/doc-files/** **/package.html"/>

<!-- We will not include platform specific source files in this release

      <fileset dir="${cvsRootDir}/j3d-core/src/classes/win32"
          includes="*/**"
          excludes="**/doc-files/** **/package.html"/>
      <fileset dir="${cvsRootDir}/j3d-core/src/classes/x11"
          includes="*/**"
          excludes="**/doc-files/** **/package.html"/>
-->

      <zipfileset dir="${cvsRootDir}/j3d-core-utils" prefix="com"
          includes="COPYRIGHT.txt *LICENSE*.*"/>

      <fileset dir="${cvsRootDir}/j3d-core-utils/src/classes/share"
          includes="*/**"
          excludes="**/doc-files/** **/package.html"/>
    </zip>
  </target>

  <target name="vecmathSrc">
    <zip destfile="${vecmathZipFile}">

      <fileset dir="${cvsRootDir}/j3d-core/release-info/src-release/vecmath"
          includes="README.txt"/>
     
      <zipfileset dir="${cvsRootDir}/vecmath" prefix="javax"
          includes="COPYRIGHT.txt *LICENSE*.*"/>

      <fileset dir="${cvsRootDir}/vecmath/src"
          includes="*/**"
          excludes="*/doc-files/** **/package.html VECMATH.MF"/>
    </zip>
  </target>

  <target name="clean-dist">
    <!-- Delete the ${dist} directory tree  -->
    <delete dir="${dist}"/>
  </target>
  
  <target name="clean-default" unless="build.concurrent">
    <delete dir="${build}/default"/>
  </target>

  <target name="clean-dist-common" if="isLinuxOnX86">
    <delete dir="${dist}/common"/>
  </target>

  <target name="clean" depends="setupPlatform,clean-default,clean-dist-common">
    <!-- Delete the ${build}, and ${dist} directory trees for current platform -->
    <delete dir="${build}/${platform}"/>
    <delete dir="${dist}/${platform}"/>
  </target>
  
  <target name="clean-all">
    <!-- Delete the ${build}, and ${dist} directory trees  -->
    <delete dir="${build}"/>	
    <delete dir="${dist}"/>
  </target>

    <target name="clean-javaonly" depends="setupPlatform">
        <!-- Delete only the java portions of $[build} for the current platform -->
        <delete dir="${build}/${platform}/debug/classes"/>
        <delete dir="${build}/${platform}/debug/lib/ext"/>
        <delete dir="${build}/${platform}/opt/classes"/>
        <delete dir="${build}/${platform}/opt/lib/ext"/>
  </target>

  <target name="install-debug" depends="jar-debug">
	<ant dir="src/classes" target="install-debug"/>
  </target>

  <target name="install-opt" depends="jar-opt">
	<ant dir="src/classes" target="install-opt"/>
  </target>

  <target name="uninstall" depends="setupPlatform">
	<ant dir="src/classes" target="uninstall"/>
  </target>

  <description>
The following ant targets are available ("jar-opt" is the default):

      all            - execute targets jar-debug and dist.

      clean          - removes build/ and dist/ for current platform
      
      clean-all      - removes build/ and dist/ for all platforms

      clean-dist     - removes dist.
      
      clean-javaonly - removes java portion of build for current platform 

      compile        - execute targets compile-debug and compile-opt.
 
      compile-debug  - builds all classes and native layer in src into 
                      class files under build/${platform}/debug/classes/ and
                      native files under build/${platform}/debug/native/

      compile-opt    - builds all classes and native layer in src into 
                      class files under build/${platform}/opt/classes/ and
                      native files under build/${platform}/opt/native/

      dist           - THIS TARGET IS FOR RELEASE ENGINEERING ONLY; DEVELOPERS NEED NOT
                       USE THIS TARGET.
                       Copies the shared jars, and the platform-specific native
                       libraries, src files, and javadoc to dist/${platform}.
                       The dist-common target must be run first.

      dist-common    - THIS TARGET IS FOR RELEASE ENGINEERING ONLY; DEVELOPERS NEED NOT
                       USE THIS TARGET.
                       This target must be run on a 32-bit Linux-x86 system.
                       Creates the shared jar from the linux-i586 and
                       windows-i586-vc build directories.
                       The jar-opt target must be run first.

      docs           - builds all classes in src into javadoc under 
                       build/javadocs.

      docs-jcp       - builds JCP docs of all classes in src into javadoc 
                       under build/javadocs/docs-jcp.

      docs-private   - builds private docs of all classes in src into javadoc 
                       under build/javadocs/docs-private.

      docs-public    - builds public docs of all classes in src into javadoc 
                      under build/javadocs/docs-public.

      echo           - echo some useful information, such as user.home,
                      ant.home, java.home and platform.

      jar            - execute targets jar-debug and jar-opt.

      jar-debug      - creates build/${platform}/debug/lib for all jar
                      files and libraries from class and native code files under 
                      build/${platform}/debug/classes and 
                      build/${platform}/debug/native.
                      
      jar-debug-javaonly 
                     - compiles only the java portion of j3d and builds
                      jars in same locations as jar-debug

      jar-opt        - creates build/${platform}/opt/lib for all jar
                      files and libraries from class and native code files under 
                      build/${platform}/opt/classes and 
                      build/${platform}/opt/native.
                      
      jar-opt-javaonly 
                     - compiles only the java portion of j3d and builds
                      jars in same location as jar-opt

      install-debug  - installs the debug build into the JDK pointed to by JAVA_HOME
      
      src            - generate a zip file j3d project source code.

      uninstall      - uninstalls j3d from the JDK pointed to by JAVA_HOME
  </description>
</project>