diff options
Diffstat (limited to 'src/CgShaderTest')
| -rw-r--r-- | src/CgShaderTest/ObjLoadCg.java | 339 | ||||
| -rw-r--r-- | src/CgShaderTest/SphereCg.java | 342 | ||||
| -rw-r--r-- | src/CgShaderTest/build.xml | 69 | ||||
| -rw-r--r-- | src/CgShaderTest/simple_fp.cg | 68 | ||||
| -rw-r--r-- | src/CgShaderTest/simple_vp.cg | 167 |
5 files changed, 985 insertions, 0 deletions
diff --git a/src/CgShaderTest/ObjLoadCg.java b/src/CgShaderTest/ObjLoadCg.java new file mode 100644 index 0000000..8d48bce --- /dev/null +++ b/src/CgShaderTest/ObjLoadCg.java @@ -0,0 +1,339 @@ +/* + * $RCSfile$ + * + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistribution of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * - Redistribution in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Sun Microsystems, Inc. or the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * This software is provided "AS IS," without a warranty of any + * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY + * EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL + * NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF + * USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS + * DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR + * ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, + * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND + * REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR + * INABILITY TO USE THIS SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * You acknowledge that this software is not designed, licensed or + * intended for use in the design, construction, operation or + * maintenance of any nuclear facility. + * + * $Revision$ + * $Date$ + * $State$ + */ + +import com.sun.j3d.loaders.objectfile.ObjectFile; +import com.sun.j3d.loaders.ParsingErrorException; +import com.sun.j3d.loaders.IncorrectFormatException; +import com.sun.j3d.loaders.Scene; +import com.sun.j3d.utils.shader.StringIO; +import java.applet.Applet; +import java.awt.*; +import java.awt.event.*; +import com.sun.j3d.utils.applet.MainFrame; +import com.sun.j3d.utils.universe.*; +import javax.media.j3d.*; +import javax.vecmath.*; +import java.util.Enumeration; +import java.io.*; +import com.sun.j3d.utils.behaviors.vp.*; +import java.net.URL; +import java.net.MalformedURLException; + +public class ObjLoadCg extends Applet { + + private boolean spin = false; + private boolean noTriangulate = false; + private boolean noStripify = false; + private double creaseAngle = 60.0; + private URL filename = null; + private SimpleUniverse u; + private BoundingSphere bounds; + + public BranchGroup createSceneGraph() { + // Create the root of the branch graph + BranchGroup objRoot = new BranchGroup(); + + // Create a Transformgroup to scale all objects so they + // appear in the scene. + TransformGroup objScale = new TransformGroup(); + Transform3D t3d = new Transform3D(); + t3d.setScale(0.7); + objScale.setTransform(t3d); + objRoot.addChild(objScale); + + // Create the transform group node and initialize it to the + // identity. Enable the TRANSFORM_WRITE capability so that + // our behavior code can modify it at runtime. Add it to the + // root of the subgraph. + TransformGroup objTrans = new TransformGroup(); + objTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); + objTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_READ); + objScale.addChild(objTrans); + + int flags = ObjectFile.RESIZE; + if (!noTriangulate) flags |= ObjectFile.TRIANGULATE; + if (!noStripify) flags |= ObjectFile.STRIPIFY; + ObjectFile f = new ObjectFile(flags, + (float)(creaseAngle * Math.PI / 180.0)); + Scene s = null; + try { + s = f.load(filename); + } + catch (FileNotFoundException e) { + e.printStackTrace(); + System.exit(1); + } + catch (ParsingErrorException e) { + e.printStackTrace(); + System.exit(1); + } + catch (IncorrectFormatException e) { + e.printStackTrace(); + System.exit(1); + } + + // Set vertex and fragment shader program for all Shape3D nodes in scene + String vertexProgram = null; + String fragmentProgram = null; + try { + vertexProgram = StringIO.readFully("./simple_vp.cg"); + fragmentProgram = StringIO.readFully("./simple_fp.cg"); + } + catch (IOException e) { + e.printStackTrace(); + System.exit(1); + } + CgVertexShader vertexShader = new CgVertexShader(vertexProgram); + CgFragmentShader fragmentShader = new CgFragmentShader(fragmentProgram); + CgShaderProgram shaderProgram = new CgShaderProgram(); + shaderProgram.setVertexShader(vertexShader); + shaderProgram.setFragmentShader(fragmentShader); + setShaderProgram(s.getSceneGroup(), shaderProgram); + + objTrans.addChild(s.getSceneGroup()); + + bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 100.0); + + if (spin) { + Transform3D yAxis = new Transform3D(); + Alpha rotationAlpha = new Alpha(-1, Alpha.INCREASING_ENABLE, + 0, 0, + 4000, 0, 0, + 0, 0, 0); + + RotationInterpolator rotator = + new RotationInterpolator(rotationAlpha, objTrans, yAxis, + 0.0f, (float) Math.PI*2.0f); + rotator.setSchedulingBounds(bounds); + objTrans.addChild(rotator); + } + + // Set up the background + Color3f bgColor = new Color3f(0.05f, 0.05f, 0.5f); + Background bgNode = new Background(bgColor); + bgNode.setApplicationBounds(bounds); + objRoot.addChild(bgNode); + + return objRoot; + } + + private void usage() + { + System.out.println( + "Usage: java ObjLoadCg [-s] [-n] [-t] [-c degrees] <.obj file>"); + System.out.println(" -s Spin (no user interaction)"); + System.out.println(" -n No triangulation"); + System.out.println(" -t No stripification"); + System.out.println( + " -c Set crease angle for normal generation (default is 60 without"); + System.out.println( + " smoothing group info, otherwise 180 within smoothing groups)"); + System.exit(0); + } // End of usage + + + + public void init() { + if (filename == null) { + // Applet + try { + URL path = getCodeBase(); + filename = new URL(path.toString() + "./galleon.obj"); + } + catch (MalformedURLException e) { + System.err.println(e); + System.exit(1); + } + } + + setLayout(new BorderLayout()); + GraphicsConfiguration config = + SimpleUniverse.getPreferredConfiguration(); + + Canvas3D c = new Canvas3D(config); + add("Center", c); + + // Create a simple scene and attach it to the virtual universe + BranchGroup scene = createSceneGraph(); + u = new SimpleUniverse(c); + + // add mouse behaviors to the ViewingPlatform + ViewingPlatform viewingPlatform = u.getViewingPlatform(); + + PlatformGeometry pg = new PlatformGeometry(); + + // Set up the ambient light + Color3f ambientColor = new Color3f(0.1f, 0.1f, 0.1f); + AmbientLight ambientLightNode = new AmbientLight(ambientColor); + ambientLightNode.setInfluencingBounds(bounds); + pg.addChild(ambientLightNode); + + // Set up the directional lights + Color3f light1Color = new Color3f(1.0f, 0.2f, 0.4f); + Vector3f light1Direction = new Vector3f(-1.0f, -1.0f, -1.0f); + Color3f light2Color = new Color3f(1.0f, 1.0f, 0.9f); + Vector3f light2Direction = new Vector3f(1.0f, 1.0f, 1.0f); + + DirectionalLight light1 + = new DirectionalLight(light1Color, light1Direction); + light1.setInfluencingBounds(bounds); + pg.addChild(light1); + + DirectionalLight light2 + = new DirectionalLight(light2Color, light2Direction); + light2.setInfluencingBounds(bounds); + pg.addChild(light2); + + viewingPlatform.setPlatformGeometry( pg ); + + // This will move the ViewPlatform back a bit so the + // objects in the scene can be viewed. + viewingPlatform.setNominalViewingTransform(); + + if (!spin) { + OrbitBehavior orbit = new OrbitBehavior(c, + OrbitBehavior.REVERSE_ALL); + BoundingSphere bounds = + new BoundingSphere(new Point3d(0.0, 0.0, 0.0), 100.0); + orbit.setSchedulingBounds(bounds); + viewingPlatform.setViewPlatformBehavior(orbit); + } + + /* + // Limit the frame rate to 100 Hz + u.getViewer().getView().setMinimumFrameCycleTime(10); + */ + + u.addBranchGraph(scene); + } + + // Set shader program for all nodes in specified branch graph + private void setShaderProgram(BranchGroup g, ShaderProgram shaderProgram) { + ShaderAppearance myApp = new ShaderAppearance(); + Material mat = new Material(); + Texture2D tex2d = new Texture2D(); + myApp.setCapability(Appearance.ALLOW_TEXTURE_WRITE); + myApp.setShaderProgram(shaderProgram); + myApp.setMaterial(mat); + myApp.setTexture(tex2d); + setShaderProgram(g, myApp); + } + + // Recursively set shader program for all children of specified group + private void setShaderProgram(Group g, + ShaderAppearance myApp) { + + Enumeration e = g.getAllChildren(); + while (e.hasMoreElements()) { + Node n = (Node)(e.nextElement()); + if (n instanceof Group) { + setShaderProgram((Group)n, myApp); + } + else if (n instanceof Shape3D) { + Shape3D s = (Shape3D)n; + s.setAppearance(myApp); + } + } + } + + // Caled if running as a program + public ObjLoadCg(String[] args) { + if (args.length != 0) { + for (int i = 0 ; i < args.length ; i++) { + if (args[i].startsWith("-")) { + if (args[i].equals("-s")) { + spin = true; + } else if (args[i].equals("-n")) { + noTriangulate = true; + } else if (args[i].equals("-t")) { + noStripify = true; + } else if (args[i].equals("-c")) { + if (i < args.length - 1) { + creaseAngle = (new Double(args[++i])).doubleValue(); + } else usage(); + } else { + usage(); + } + } else { + try { + if ((args[i].indexOf("file:") == 0) || + (args[i].indexOf("http") == 0)) { + filename = new URL(args[i]); + } + else if (args[i].charAt(0) != '/') { + filename = new URL("file:./" + args[i]); + } + else { + filename = new URL("file:" + args[i]); + } + } + catch (MalformedURLException e) { + System.err.println(e); + System.exit(1); + } + } + } + } + } + + + + // Running as an applet + public ObjLoadCg() { + } + + public void destroy() { + u.cleanup(); + } + + + + // + // The following allows ObjLoadCg to be run as an application + // as well as an applet + // + public static void main(String[] args) { + new MainFrame(new ObjLoadCg(args), 700, 700); + } +} diff --git a/src/CgShaderTest/SphereCg.java b/src/CgShaderTest/SphereCg.java new file mode 100644 index 0000000..a5664ce --- /dev/null +++ b/src/CgShaderTest/SphereCg.java @@ -0,0 +1,342 @@ +/* + * $RCSfile$ + * + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistribution of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * - Redistribution in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Sun Microsystems, Inc. or the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * This software is provided "AS IS," without a warranty of any + * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY + * EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL + * NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF + * USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS + * DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR + * ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, + * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND + * REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR + * INABILITY TO USE THIS SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * You acknowledge that this software is not designed, licensed or + * intended for use in the design, construction, operation or + * maintenance of any nuclear facility. + * + * $Revision$ + * $Date$ + * $State$ + */ + +import java.applet.Applet; +import java.awt.*; +import java.io.*; +import com.sun.j3d.utils.applet.MainFrame; +import com.sun.j3d.utils.geometry.Sphere; +import com.sun.j3d.utils.shader.StringIO; +import com.sun.j3d.utils.universe.*; +import javax.media.j3d.*; +import javax.vecmath.*; +import java.util.Enumeration; +import java.net.URL; +import java.net.MalformedURLException; + +/** + * Simple CG Shader test program + */ +public class SphereCg extends Applet { + + // Constants for type of light to use + private static final int DIRECTIONAL_LIGHT = 0; + private static final int POINT_LIGHT = 1; + private static final int SPOT_LIGHT = 2; + + // Flag indicates type of lights: directional, point, or spot + // lights. This flag is set based on command line argument + private static int lightType = DIRECTIONAL_LIGHT; + + private SimpleUniverse u = null; + + public BranchGroup createSceneGraph(SimpleUniverse u) { + Color3f eColor = new Color3f(0.0f, 0.0f, 0.0f); + Color3f sColor = new Color3f(1.0f, 1.0f, 1.0f); + Color3f objColor = new Color3f(0.6f, 0.6f, 0.6f); + Color3f lColor1 = new Color3f(1.0f, 0.0f, 0.0f); + Color3f lColor2 = new Color3f(0.0f, 1.0f, 0.0f); + Color3f alColor = new Color3f(0.2f, 0.2f, 0.2f); + Color3f bgColor = new Color3f(0.05f, 0.05f, 0.2f); + + Transform3D t; + + // Create the root of the branch graph + BranchGroup objRoot = new BranchGroup(); + + // Create a Transformgroup to scale all objects so they + // appear in the scene. + TransformGroup objScale = new TransformGroup(); + Transform3D t3d = new Transform3D(); + t3d.setScale(0.4); + objScale.setTransform(t3d); + objRoot.addChild(objScale); + + // Create a bounds for the background and lights + BoundingSphere bounds = + new BoundingSphere(new Point3d(0.0,0.0,0.0), 100.0); + + // Set up the background + Background bg = new Background(bgColor); + bg.setApplicationBounds(bounds); + objScale.addChild(bg); + + // Create a Sphere object, generate one copy of the sphere, + // and add it into the scene graph. + ShaderAppearance a = new ShaderAppearance(); + Material m = new Material(objColor, eColor, objColor, sColor, 100.0f); + m.setLightingEnable(true); + Texture t2d = new Texture2D(); + a.setTexture(t2d); + a.setCapability(Appearance.ALLOW_TEXTURE_WRITE); + + String vertexProgram = null; + String fragmentProgram = null; + try { + vertexProgram = StringIO.readFully("./simple_vp.cg"); + fragmentProgram = StringIO.readFully("./simple_fp.cg"); + } + catch (IOException e) { + e.printStackTrace(); + System.exit(1); + } + CgVertexShader vertexShader = new CgVertexShader(vertexProgram); + CgFragmentShader fragmentShader = new CgFragmentShader(fragmentProgram); + CgShaderProgram shaderProgram = new CgShaderProgram(); + shaderProgram.setVertexShader(vertexShader); + shaderProgram.setFragmentShader(fragmentShader); + + a.setShaderProgram(shaderProgram); + a.setMaterial(m); + Sphere sph = new Sphere(1.0f, Sphere.GENERATE_NORMALS, 200, a); + objScale.addChild(sph); + + // Create the transform group node for the each light and initialize + // it to the identity. Enable the TRANSFORM_WRITE capability so that + // our behavior code can modify it at runtime. Add them to the root + // of the subgraph. + TransformGroup l1RotTrans = new TransformGroup(); + l1RotTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); + objScale.addChild(l1RotTrans); + + TransformGroup l2RotTrans = new TransformGroup(); + l2RotTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); + objScale.addChild(l2RotTrans); + + // Create transformations for the positional lights + t = new Transform3D(); + Vector3d lPos1 = new Vector3d(0.0, 0.0, 2.0); + t.set(lPos1); + TransformGroup l1Trans = new TransformGroup(t); + l1RotTrans.addChild(l1Trans); + + t = new Transform3D(); + Vector3d lPos2 = new Vector3d(0.5, 0.8, 2.0); + t.set(lPos2); + TransformGroup l2Trans = new TransformGroup(t); + l2RotTrans.addChild(l2Trans); + + /* + // Create Geometry for point lights + ColoringAttributes caL1 = new ColoringAttributes(); + ColoringAttributes caL2 = new ColoringAttributes(); + caL1.setColor(lColor1); + caL2.setColor(lColor2); + Appearance appL1 = new Appearance(); + Appearance appL2 = new Appearance(); + appL1.setColoringAttributes(caL1); + appL2.setColoringAttributes(caL2); + l1Trans.addChild(new Sphere(0.05f, appL1)); + l2Trans.addChild(new Sphere(0.05f, appL2)); + */ + + // Create lights + AmbientLight aLgt = new AmbientLight(alColor); + + Light lgt1 = null; + Light lgt2 = null; + + Point3f lPoint = new Point3f(0.0f, 0.0f, 0.0f); + Point3f atten = new Point3f(1.0f, 0.0f, 0.0f); + Vector3f lDirect1 = new Vector3f(lPos1); + Vector3f lDirect2 = new Vector3f(lPos2); + lDirect1.negate(); + lDirect2.negate(); + + switch (lightType) { + case DIRECTIONAL_LIGHT: + lgt1 = new DirectionalLight(lColor1, lDirect1); + lgt2 = new DirectionalLight(lColor2, lDirect2); + break; + case POINT_LIGHT: + lgt1 = new PointLight(lColor1, lPoint, atten); + lgt2 = new PointLight(lColor2, lPoint, atten); + break; + case SPOT_LIGHT: + lgt1 = new SpotLight(lColor1, lPoint, atten, lDirect1, + 25.0f * (float)Math.PI / 180.0f, 10.0f); + lgt2 = new SpotLight(lColor2, lPoint, atten, lDirect2, + 25.0f * (float)Math.PI / 180.0f, 10.0f); + break; + } + + // Set the influencing bounds + aLgt.setInfluencingBounds(bounds); + lgt1.setInfluencingBounds(bounds); + lgt2.setInfluencingBounds(bounds); + + // Add the lights into the scene graph + objScale.addChild(aLgt); + l1Trans.addChild(lgt1); + l2Trans.addChild(lgt2); + + // Create a new Behavior object that will perform the desired + // operation on the specified transform object and add it into the + // scene graph. + Transform3D yAxis = new Transform3D(); + Alpha rotor1Alpha = new Alpha(-1, Alpha.INCREASING_ENABLE, + 0, 0, + 4000, 0, 0, + 0, 0, 0); + RotationInterpolator rotator1 = + new RotationInterpolator(rotor1Alpha, + l1RotTrans, + yAxis, + 0.0f, (float) Math.PI*2.0f); + rotator1.setSchedulingBounds(bounds); + l1RotTrans.addChild(rotator1); + + // Create a new Behavior object that will perform the desired + // operation on the specified transform object and add it into the + // scene graph. + Alpha rotor2Alpha = new Alpha(-1, Alpha.INCREASING_ENABLE, + 0, 0, + 1000, 0, 0, + 0, 0, 0); + RotationInterpolator rotator2 = + new RotationInterpolator(rotor2Alpha, + l2RotTrans, + yAxis, + 0.0f, 0.0f); + bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 100.0); + rotator2.setSchedulingBounds(bounds); + l2RotTrans.addChild(rotator2); + + // Create a position interpolator and attach it to the view + // platform + TransformGroup vpTrans = + u.getViewingPlatform().getViewPlatformTransform(); + Transform3D axisOfTranslation = new Transform3D(); + Alpha transAlpha = new Alpha(-1, + Alpha.INCREASING_ENABLE | + Alpha.DECREASING_ENABLE, + 0, 0, + 5000, 0, 0, + 5000, 0, 0); + axisOfTranslation.rotY(-Math.PI/2.0); + PositionInterpolator translator = + new PositionInterpolator(transAlpha, + vpTrans, + axisOfTranslation, + 2.0f, 3.5f); + translator.setSchedulingBounds(bounds); + objScale.addChild(translator); + + // Let Java 3D perform optimizations on this scene graph. + objRoot.compile(); + + return objRoot; + } + + public SphereCg() { + } + + public void init() { + setLayout(new BorderLayout()); + GraphicsConfiguration config = + SimpleUniverse.getPreferredConfiguration(); + + Canvas3D c = new Canvas3D(config); + add("Center", c); + + u = new SimpleUniverse(c); + BranchGroup scene = createSceneGraph(u); + + // This will move the ViewPlatform back a bit so the + // objects in the scene can be viewed. + u.getViewingPlatform().setNominalViewingTransform(); + + /* + // Limit the frame rate to 100 Hz + u.getViewer().getView().setMinimumFrameCycleTime(10); + */ + + u.addBranchGraph(scene); + } + + public void destroy() { + u.cleanup(); + } + + // + // The following allows SphereCg to be run as an application + // as well as an applet + // + public static void main(String[] args) { + // Parse the Input Arguments + String usage = "Usage: java SphereCg [-point | -spot | -dir]"; + for (int i = 0; i < args.length; i++) { + if (args[i].startsWith("-")) { + if (args[i].equals("-point")) { + /* + System.out.println("Using point lights"); + lightType = POINT_LIGHT; + */ + System.out.println("Point lights not yet implemented, option ignored"); + } + else if (args[i].equals("-spot")) { + /* + System.out.println("Using spot lights"); + lightType = SPOT_LIGHT; + */ + System.out.println("Spot lights not yet implemented, option ignored"); + } + else if (args[i].equals("-dir")) { + System.out.println("Using directional lights"); + lightType = DIRECTIONAL_LIGHT; + } + else { + System.out.println(usage); + System.exit(0); + } + } + else { + System.out.println(usage); + System.exit(0); + } + } + + new MainFrame(new SphereCg(), 700, 700); + } +} diff --git a/src/CgShaderTest/build.xml b/src/CgShaderTest/build.xml new file mode 100644 index 0000000..47e5a36 --- /dev/null +++ b/src/CgShaderTest/build.xml @@ -0,0 +1,69 @@ +<?xml version="1.0"?> + +<!-- +/* + * $RCSfile$ + * + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistribution of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * - Redistribution in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Sun Microsystems, Inc. or the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * This software is provided "AS IS," without a warranty of any + * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY + * EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL + * NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF + * USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS + * DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR + * ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, + * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND + * REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR + * INABILITY TO USE THIS SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * You acknowledge that this software is not designed, licensed or + * intended for use in the design, construction, operation or + * maintenance of any nuclear facility. + * + * $Revision$ + * $Date$ + * $State$ + */ + --> + +<project basedir="." default="compile"> + <target name="compile"> + <javac + destdir="." srcdir="." + source="1.4" target="1.4" + debug="true" deprecation="true"> + </javac> + </target> + + <target name="all" depends="compile"> + </target> + + <target description="Clean all build products." name="clean"> + <delete> + <fileset dir="."> + <include name="**/*.class"/> + </fileset> + </delete> + </target> + +</project> diff --git a/src/CgShaderTest/simple_fp.cg b/src/CgShaderTest/simple_fp.cg new file mode 100644 index 0000000..d651833 --- /dev/null +++ b/src/CgShaderTest/simple_fp.cg @@ -0,0 +1,68 @@ +/* + * $RCSfile$ + * + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistribution of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * - Redistribution in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Sun Microsystems, Inc. or the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * This software is provided "AS IS," without a warranty of any + * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY + * EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL + * NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF + * USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS + * DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR + * ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, + * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND + * REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR + * INABILITY TO USE THIS SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * You acknowledge that this software is not designed, licensed or + * intended for use in the design, construction, operation or + * maintenance of any nuclear facility. + * + * $Revision$ + * $Date$ + * $State$ + */ + +// Simple fragment program to attenuate the input fragment color as a +// function of the distance of the fragment position from the center +// of the window + +// define inputs from vertex shader to fragment shader +struct vertin +{ + float4 HPosition : POSITION; + float4 FragPos : TEXCOORD0; + float4 Color0 : COLOR0; +}; + +float4 main(vertin IN) : COLOR +{ + // Compute distance from center in range [0.0, 1.0] + float2 dist = min(abs(IN.FragPos.xy), 1.0f); + float2 invDist = 1.0f - dist; + + // Compute attenuation + float atten = invDist.x * invDist.y; + float4 outcolor = float4(IN.Color0 * atten); + + return outcolor; +} diff --git a/src/CgShaderTest/simple_vp.cg b/src/CgShaderTest/simple_vp.cg new file mode 100644 index 0000000..cec98ad --- /dev/null +++ b/src/CgShaderTest/simple_vp.cg @@ -0,0 +1,167 @@ +/* + * $RCSfile$ + * + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistribution of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * - Redistribution in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Sun Microsystems, Inc. or the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * This software is provided "AS IS," without a warranty of any + * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY + * EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL + * NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF + * USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS + * DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR + * ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, + * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND + * REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR + * INABILITY TO USE THIS SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * You acknowledge that this software is not designed, licensed or + * intended for use in the design, construction, operation or + * maintenance of any nuclear facility. + * + * $Revision$ + * $Date$ + * $State$ + */ + +/*********************************************************************NVMH3**** +Path: NVSDK\Common\media\programs +File: simple.cg + +Copyright NVIDIA Corporation 2002 +TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS SOFTWARE IS PROVIDED +*AS IS* AND NVIDIA AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES, EITHER EXPRESS +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY +AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL NVIDIA OR ITS SUPPLIERS +BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES +WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, +BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) +ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, EVEN IF NVIDIA HAS +BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + + +Comments: + +******************************************************************************/ + +// Simple vertex shader, derived from NVIDIA's simple.cg sample +// shader, that modulates the lit color with a noise pattern based on +// vertex position. + +// define inputs from application +struct appin +{ + float4 Position : POSITION; + float4 Normal : NORMAL; +}; + +// define outputs from vertex shader +struct vertout +{ + float4 HPosition : POSITION; + float4 FragPos : TEXCOORD0; + float4 Color0 : COLOR0; +}; + +vertout main(appin IN, + uniform float4x4 ModelViewProj, + uniform float4x4 ModelViewIT, + uniform float4 LightVec, + uniform float4 LightColor, + uniform float4 DiffuseMaterial, + uniform float4 SpecularMaterial) +{ + vertout OUT; + +// Assume that the profile is PROFILE_ARBVP1... +// #ifdef PROFILE_ARBVP1 + ModelViewProj = glstate.matrix.mvp; + ModelViewIT = glstate.matrix.invtrans.modelview[0]; + LightVec = glstate.light[0].position; + LightColor = glstate.light[0].diffuse; + DiffuseMaterial = glstate.material.front.diffuse; + SpecularMaterial = glstate.material.front.specular; +// #endif + + // transform vertex position into homogenous clip-space + OUT.HPosition = mul(ModelViewProj, IN.Position); + + // Output the post-perspective-divide position as FragPos + float invW = 1.0f / OUT.HPosition.w; + OUT.FragPos = OUT.HPosition * invW; + + // transform normal from model-space to view-space + float3 normalVec = normalize(mul(ModelViewIT, IN.Normal).xyz); + + // store normalized light vector + float3 lightVec = normalize(LightVec.xyz); + + // calculate half angle vector + float3 eyeVec = float3(0.0, 0.0, 1.0); + float3 halfVec = normalize(lightVec + eyeVec); + + // calculate diffuse component + float diffuse = dot(normalVec, lightVec); + + // calculate specular component + float specular = dot(normalVec, halfVec); + + // The lit() function is a handy function in the standard library that + // can be used to accelerate your lighting calculations. + // + // This function return a vector containing these values: + // result.x = 1.0; + // result.y = max(diffuse, 0); + // result.z = if (result.y > 0.0) then pow(specular, 32) else 0.0 + // result.w = 1.0; + + // Use the lit function to compute lighting vector from diffuse and + // specular values + float4 lighting = lit(diffuse, specular, 32); + + // combine diffuse and specular contributions + float3 color0 = (lighting.y * DiffuseMaterial.xyz * LightColor.xyz) + + (lighting.z * SpecularMaterial.xyz); + + // Generate a pseudo-random noise pattern +// float3 xyz = clamp((normalVec.xyz + 1.0) * 0.5, 0.0, 1.0); + float3 xyz = clamp((OUT.HPosition.xyz + 1.0) * 0.5, 0.0, 1.0); + + xyz = frac(xyz * 262144.0); + float randSeed = frac(3.0 * xyz.x + 5.0 * xyz.y + 7.0 * xyz.z); + + float3 altColor; + + randSeed = frac(37.0 * randSeed); + altColor.x = randSeed * 0.5 + 0.5; + randSeed = frac(37.0 * randSeed); + altColor.y = randSeed * 0.5 + 0.5; + randSeed = frac(37.0 * randSeed); + altColor.z = randSeed * 0.5 + 0.5; + randSeed = frac(37.0 * randSeed); + float altAlpha = randSeed * 0.5; + + // Apply noise and output final vertex color + OUT.Color0.rgb = lerp(color0, altColor, altAlpha); + OUT.Color0.a = 1.0; + + return OUT; +} |