/* * $RCSfile$ * * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * - Redistribution of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * - Redistribution in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Sun Microsystems, Inc. or the names of * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * This software is provided "AS IS," without a warranty of any * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY * EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL * NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF * USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS * DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR * ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND * REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR * INABILITY TO USE THIS SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * You acknowledge that this software is not designed, licensed or * intended for use in the design, construction, operation or * maintenance of any nuclear facility. * * $Revision$ * $Date$ * $State$ */ import com.sun.j3d.utils.picking.behaviors.*; import com.sun.j3d.utils.picking.*; import java.applet.Applet; import java.awt.BorderLayout; import java.awt.event.*; import java.awt.Component; import com.sun.j3d.utils.applet.MainFrame; import com.sun.j3d.utils.universe.*; import javax.media.j3d.*; import javax.vecmath.*; import java.awt.Point; import javax.swing.*; import javax.swing.border.BevelBorder; /** * PickTest shows how to use the Picking utilities on various GeometryArray * subclasses and Morph object. * Type of Geometry : CompressedGeometry ( GullCG.java ) * IndexedQuadArray ( CubeIQA.java ) * TriangleArray ( TetrahedronTA.java ) * IndexedTriangleArray ( TetrahedronITA.java ) * TriangleFanArray ( OctahedronTFA.java ) * IndexedTriangleFanArray ( OctahedronITA.java ) * TriangleStripArray ( IcosahedronTFA.java ) * IndexedTriangleStripArray ( IcosahedronITA.java ) * PointArray( TetrahedronPA.java ) * LineArray( TetrahedronLA.java ) * IndexLineArray( TetrahedronILA.java ) * LineStripArray( TetrahedronLSA.java ) * IndexLineStripArray( TetrahedronILSA.java ) * * Morph Object uses : QuadArray ( ColorCube.java, ColorPyramidDown.java, * and ColorPyramidUp.java ). */ public class PickTest extends Applet implements ActionListener { private View view = null; private QuadArray geomMorph[] = new QuadArray[3]; private Morph morph; private PickRotateBehavior behavior1; private PickZoomBehavior behavior2; private PickTranslateBehavior behavior3; private SimpleUniverse u = null; public BranchGroup createSceneGraph(Canvas3D canvas) { // Create the root of the branch graph BranchGroup objRoot = new BranchGroup(); // Create a Transformgroup to scale all objects so they // appear in the scene. TransformGroup objScale = new TransformGroup(); Transform3D t3d = new Transform3D(); t3d.setScale(1.0); objScale.setTransform(t3d); objRoot.addChild(objScale); // Create a bunch of objects with a behavior and add them // into the scene graph. int row, col; int numRows = 4, numCols = 4; for (int i = 0; i < numRows; i++) { double ypos = (double)(i - numRows/2) * 0.45 + 0.25; for (int j = 0; j < numCols; j++) { double xpos = (double)(j - numCols/2) * 0.45 + 0.25; objScale.addChild(createObject(i * numCols + j, 0.1, xpos, ypos)); } } BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 100.0); // Add a light. Color3f lColor = new Color3f(1.0f, 1.0f, 1.0f) ; Vector3f lDir = new Vector3f(0.0f, 0.0f, -1.0f) ; DirectionalLight lgt = new DirectionalLight(lColor, lDir) ; lgt.setInfluencingBounds(bounds) ; objRoot.addChild(lgt) ; // Now create the Alpha object that controls the speed of the // morphing operation. Alpha morphAlpha = new Alpha(-1, Alpha.INCREASING_ENABLE | Alpha.DECREASING_ENABLE, 0, 0, 4000, 1000, 500, 4000, 1000, 500); // Finally, create the morphing behavior MorphingBehavior mBeh = new MorphingBehavior(morphAlpha, morph); mBeh.setSchedulingBounds(bounds); objRoot.addChild(mBeh); behavior1 = new PickRotateBehavior(objRoot, canvas, bounds); objRoot.addChild(behavior1); behavior2 = new PickZoomBehavior(objRoot, canvas, bounds); objRoot.addChild(behavior2); behavior3 = new PickTranslateBehavior(objRoot, canvas, bounds); objRoot.addChild(behavior3); // Let Java 3D perform optimizations on this scene graph. objRoot.compile(); return objRoot; } private Group createObject(int index, double scale, double xpos, double ypos){ Shape3D shape = null; Geometry geom = null; // Create a transform group node to scale and position the object. Transform3D t = new Transform3D(); t.set(scale, new Vector3d(xpos, ypos, 0.0)); TransformGroup objTrans = new TransformGroup(t); objTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); objTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_READ); objTrans.setCapability(TransformGroup.ENABLE_PICK_REPORTING); // Create a second transform group node and initialize it to the // identity. Enable the TRANSFORM_WRITE capability so that // our behavior code can modify it at runtime. TransformGroup spinTg = new TransformGroup(); spinTg.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); spinTg.setCapability(TransformGroup.ALLOW_TRANSFORM_READ); spinTg.setCapability(TransformGroup.ENABLE_PICK_REPORTING); Appearance appearance = new Appearance(); switch(index) { case 0: geom = new GullCG(); break; case 1: geom = new TetrahedronTA(); break; case 2: geom = new OctahedronTFA(); break; case 3: geom = new IcosahedronTSA(); break; case 4: geom = new CubeIQA(); break; case 5: geom = new TetrahedronITA(); break; case 6: geom = new OctahedronITFA(); break; case 7: geom = new IcosahedronITSA(); break; case 8: geomMorph[0] = new ColorPyramidUp(); geomMorph[1] = new ColorCube(); geomMorph[2] = new ColorPyramidDown(); break; case 9: geom = new TetrahedronLA(); break; case 10: geom = new TetrahedronILA(); break; case 11: geom = new TetrahedronLSA(); break; case 12: geom = new TetrahedronILSA(); break; case 13: geom = new TetrahedronPA(); break; case 14: geom = new TetrahedronIPA(); break; // TODO: other geo types, Text3D? case 15: geom = new TetrahedronTA(); break; } Material m = new Material() ; if(index == 8) { m.setLightingEnable(false) ; appearance.setMaterial(m) ; morph = new Morph((GeometryArray[]) geomMorph, appearance); morph.setCapability(Morph.ALLOW_WEIGHTS_READ); morph.setCapability(Morph.ALLOW_WEIGHTS_WRITE); PickTool.setCapabilities(morph, PickTool.INTERSECT_FULL); spinTg.addChild(morph); } else { // Geometry picking require this to be set. if (index == 0) m.setLightingEnable(true) ; else m.setLightingEnable(false) ; appearance.setMaterial(m) ; if ((index == 13) || (index == 14)) { PointAttributes pa = new PointAttributes(); pa.setPointSize(4.0f); appearance.setPointAttributes(pa); } shape = new Shape3D(geom,appearance); shape.setCapability(Shape3D.ALLOW_APPEARANCE_READ); shape.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE); shape.setCapability(Shape3D.ENABLE_PICK_REPORTING); PickTool.setCapabilities(shape, PickTool.INTERSECT_FULL); spinTg.addChild(shape); } // add it to the scene graph. objTrans.addChild(spinTg); return objTrans; } private void setPickMode(int mode) { behavior1.setMode(mode); behavior2.setMode(mode); behavior3.setMode(mode); } private void setPickTolerance(float tolerance) { behavior1.setTolerance(tolerance); behavior2.setTolerance(tolerance); behavior3.setTolerance(tolerance); } private void setViewMode(int mode) { view.setProjectionPolicy(mode); } // GUI stuff String pickModeString = new String("Pick Mode"); String boundsString = new String("BOUNDS"); String geometryString = new String("GEOMETRY"); String geometryIntersectString = new String("GEOMETRY_INTERSECT_INFO"); String toleranceString = new String("Pick Tolerance"); String tolerance0String = new String("0"); String tolerance2String = new String("2"); String tolerance4String = new String("4"); String tolerance8String = new String("8"); String viewModeString = new String("View Mode"); String perspectiveString = new String("Perspective"); String parallelString = new String("Parallel"); private void addRadioButton(JPanel panel, ButtonGroup bg, String ownerName, String buttonName, boolean selected) { JRadioButton item; item = new JRadioButton(buttonName); item.setName(ownerName); item.addActionListener(this); if (selected) { item.setSelected(true); } panel.add(item); bg.add(item); } private void setupGUI(JPanel panel) { ButtonGroup bg; panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS)); panel.setBorder(new BevelBorder(BevelBorder.RAISED)); panel.add(new JLabel(pickModeString)); bg = new ButtonGroup(); addRadioButton(panel, bg, pickModeString, boundsString, true); addRadioButton(panel, bg, pickModeString, geometryString, false); addRadioButton(panel, bg, pickModeString, geometryIntersectString, false); panel.add(new JLabel(toleranceString)); bg = new ButtonGroup(); addRadioButton(panel, bg, toleranceString, tolerance0String,false); addRadioButton(panel, bg, toleranceString, tolerance2String,true); addRadioButton(panel, bg, toleranceString, tolerance4String,false); addRadioButton(panel, bg, toleranceString, tolerance8String,false); panel.add(new JLabel(viewModeString)); bg = new ButtonGroup(); addRadioButton(panel, bg, viewModeString, perspectiveString, true); addRadioButton(panel, bg, viewModeString, parallelString, false); } public void actionPerformed(ActionEvent e) { String name = ((Component)e.getSource()).getName(); String value = e.getActionCommand(); //System.out.println("action: name = " + name + " value = " + value); if (name == pickModeString) { if (value == boundsString) { setPickMode(PickCanvas.BOUNDS); } else if (value == geometryString) { setPickMode(PickCanvas.GEOMETRY); } else if (value == geometryIntersectString) { setPickMode(PickCanvas.GEOMETRY_INTERSECT_INFO); } else { System.out.println("Unknown pick mode: " + value); } } else if (name == toleranceString) { if (value == tolerance0String) { setPickTolerance(0.0f); } else if (value == tolerance2String) { setPickTolerance(2.0f); } else if (value == tolerance4String) { setPickTolerance(4.0f); } else if (value == tolerance8String) { setPickTolerance(8.0f); } else { System.out.println("Unknown tolerance: " + value); } } else if (name == viewModeString) { if (value == perspectiveString) { setViewMode(View.PERSPECTIVE_PROJECTION); } else if (value == parallelString) { setViewMode(View.PARALLEL_PROJECTION); } } else { System.out.println("Unknown action name: " + name); } } public PickTest (){ } public void init() { setLayout(new BorderLayout()); Canvas3D c = new Canvas3D(SimpleUniverse.getPreferredConfiguration()); add("Center", c); JPanel guiPanel = new JPanel(); setupGUI(guiPanel); add(guiPanel, BorderLayout.EAST); // Create a scene and attach it to the virtual universe BranchGroup scene = createSceneGraph(c); u = new SimpleUniverse(c); // This will move the ViewPlatform back a bit so the // objects in the scene can be viewed. u.getViewingPlatform().setNominalViewingTransform(); view = u.getViewer().getView(); u.addBranchGraph(scene); } public void destroy() { u.cleanup(); } public static void main(String argv[]) { BranchGroup group; new MainFrame(new PickTest(), 750, 550); } }