# Default (English) UI messages for netx # L=Launcher, B=Boot, P=Parser, C=cache S=security # # General NullParameter=Null parameter ButAllow=Allow ButBrowse=Browse... ButCancel=\ Cancel\ ButClose=Close ButCopy=Copy to Clipboard ButMoreInformation=More Information... ButOk=OK ButProceed=Proceed ButRun=Run ButApply=Apply ButDone=Done AFileOnTheMachine=a file on the machine AlwaysAllowAction=Always allow this action Usage=Usage: Continue=Do you want to continue? Field=Field From=From Name=Name Password=Password: Publisher=Publisher Unknown= Username=Username: Value=Value Version=Version # LS - Severity LSMinor=Minor LSFatal=Fatal # LC - Category LCSystem=System Error LCExternalLaunch=External Launch Error LCFileFormat=File Format Error LCReadError=Read Error LCClient=Application Error LCLaunching=Launch Error LCNotSupported=Unsupported Feature LCInit=Initialization Error LAllThreadGroup=All JNLP applications LNullUpdatePolicy=Update policy cannot be null. LThreadInterrupted=Thread interrupted while waiting for file to launch. LThreadInterruptedInfo= LCouldNotLaunch=Could not launch JNLP file. LCouldNotLaunchInfo= LCantRead=Could not read or parse the JNLP file. LCantReadInfo= LNullLocation=Could not determine .jnlp file location. LNullLocationInfo=An attempt was made to launch a JNLP file in another JVM, but the file could not be located. In order to launch in an external JVM, the runtime must be able to locate the .jnlp file either in the local filesystem or on a server. LNetxJarMissing=Could not determine location of netx.jar. LNetxJarMissingInfo=An attempt was made to lauch a JNLP file in another JVM, but the netx.jar could not be located. In order to launch in an external JVM, the runtime must be able to locate the netx.jar file. LNotToSpec=JNLP file not strictly to spec. LNotToSpecInfo=The JNLP file contains data that is prohibited by the JNLP specification. The runtime can attempt to ignore the invalid information and continue launching the file. LNotApplication=Not an application file. LNotApplicationInfo=An attempt was made to load a non-application file as an application. LNotApplet=Not an applet file. LNotAppletInfo=An attempt was made to load a non-applet file as an applet. LNoInstallers=Installers not supported. LNoInstallersInfo=JNLP installer files are not yet supported. LInitApplet=Could not initialize applet. LInitAppletInfo= LInitApplication=Could not initialize application. LInitApplicationInfo= LNotLaunchable=Not a launchable JNLP file. LNotLaunchableInfo=File must be a JNLP application, applet, or installer type. LCantDetermineMainClass=Unknown Main-Class. LCantDetermineMainClassInfo=Could not determine the main class for this application. LUnsignedJarWithSecurity=Cannot grant permissions to unsigned jars. LUnsignedJarWithSecurityInfo=Application requested security permissions, but jars are not signed. LSignedAppJarUsingUnsignedJar=Signed application using unsigned jars. LSignedAppJarUsingUnsignedJarInfo=The main application jar is signed, but some of the jars it is using aren't. JNotApplet=File is not an applet. JNotApplication=File is not an application. JNotComponent=File is not a component. JNotInstaller=File is not an installer. JInvalidExtensionDescriptor=Extension does not refer to a component or installer (name={1}, location={2}). LNotVerified=Jars not verified. LCancelOnUserRequest=Canceled on user request. LFatalVerification=A fatal error occurred while trying to verify jars. LFatalVerificationInfo= LNotVerifiedDialog=Not all jars could be verified. LAskToContinue=Would you still like to continue running this application? # Parser PInvalidRoot=Root node is not a jnlp node PNoResources=No resources section defined PUntrustedNative=nativelib element cannot be specified unless a trusted environment is requested. PExtensionHasJ2SE=j2se element cannot be specified in a component extension file. PInnerJ2SE=j2se element cannot be specified within a j2se element. PTwoMains=Duplicate main JAR defined in a resources element (there can be only one) PNativeHasMain=Cannot specify main attribute on native JARs. PNoInfoElement=No information section defined PTwoDescriptions=Duplicate description of kind {0} PSharing=Element "sharing-allowed" is illegal in a standard JNLP file PTwoSecurity=Only one security element allowed per JNLPFile. PEmptySecurity=Security element specified but does not contain a permissions element. PTwoDescriptors=Only one application descriptor element allowed per JNLPFile. PTwoDesktops=Only one desktop element allowed PTwoMenus=Only one menu element allowed PTwoTitles=Only one title element allowed PTwoIcons=Only one icon element allowed PTwoUpdates=Only one update element is allowed PUnknownApplet=Unknown Applet PBadWidth=Invalid applet width. PBadHeight=Invalid applet height. PUrlNotInCodebase=Relative URL does not specify a subdirectory of the codebase. (node={0}, href={1}, base={2}) PBadRelativeUrl=Invalid relative URL (node={0}, href={1}, base={2}) PBadNonrelativeUrl=Invalid non-relative URL (node={0}, href={0}). PNeedsAttribute=The {0} element must specify a {1} attribute. PBadXML=Invalid XML document syntax. PBadHeapSize=Invalid value for heap size ({0}) # Runtime BLaunchAbout=Launching about window... BNeedsFile=Must specify a .jnlp file RNoAboutJnlp=Unable to find about.jnlp BFileLoc=JNLP file location BArgNA=Arguments not used for this type of JNLP file (ignored). BParamNA=Parameters not used for this type of JNLP file (ignored). BBadProp=Incorrect property format {0} (should be key=value) BBadParam=Incorrect parameter format {0} (should be name=value) BNoDir=Directory {0} does not exist. RNoResource=Missing Resource: {0} RShutdown=This exception to prevent shutdown of JVM, but the process has been terminated. RExitTaken=Exit class already set and caller is not exit class. RCantReplaceSM=Changing the SecurityManager is not allowed. RCantCreateFile=Cant create file {0} RCantDeleteFile=Cant delete file {0} RRemoveRPermFailed=Removing read permission on file {0} failed RRemoveWPermFailed=Removing write permissions on file {0} failed RRemoveXPermFailed=Removing execute permissions on file {0} failed RGetRPermFailed=Acquiring read permissions on file {0} failed RGetWPermFailed=Acquiring write permissions on file {0} failed RGetXPermFailed=Acquiring execute permissions on file {0} failed RCantCreateDir=Cant create directory {0} RCantRename=Cant rename {0} to {0} RDenyStopped=Stopped applications have no permissions. RExitNoApp=Can not exit the JVM because the current application cannot be determined. RNoLockDir=Unable to create locks directory ({0}) RNestedJarExtration=Unable to extract nested jar. RUnexpected=Unexpected {0} at {1} RConfigurationError=Fatal error while reading the configuration RConfigurationFatal=ERROR: a fatal error has occurred while loading configuration. Perhaps a global configuration was required but could not be found RPRoxyPacNotSupported=Using Proxy Auto Config (PAC) files is not supported. RProxyFirefoxNotFound=Unable to use Firefox's proxy settings. Using "DIRECT" as proxy type. RProxyFirefoxOptionNotImplemented=Browser proxy option "{0}" ({1}) not supported yet. RBrowserLocationPromptTitle=Browser Location RBrowserLocationPromptMessage=Specify Browser Location RBrowserLocationPromptMessageWithReason=Specify Browser Location (the browser command "{0}" is invalid). # Boot options, message should be shorter than this ----------------> BOUsage=javaws [-run-options] BOUsage2=javaws [-control-options] BOJnlp = Location of JNLP file to launch (url or file). BOArg = Adds an application argument before launching. BOParam = Adds an applet parameter before launching. BOProperty = Sets a system property before launching. BOUpdate = Update check if seconds since last checked. BOLicense = Display the GPL license and exit. BOVerbose = Enable verbose output. BOAbout = Shows a sample application. BONosecurity= Disables the secure runtime environment. BONoupdate = Disables checking for updates. BOHeadless = Disables download window, other UIs. BOStrict = Enables strict checking of JNLP file format. BOViewer = Shows the trusted certificate viewer. BXnofork = Do not create another JVM. BXclearcache= Clean the JNLP application cache. BOHelp = Print this message and exit. # Cache CAutoGen=automatically generated - do not edit CNotCacheable={0} is not a cacheable resource CDownloading=Downloading CComplete=Complete CChooseCache=Choose a cache directory... CChooseCacheInfo=Netx needs a location for storing cache files. CChooseCacheDir=Cache directory CCannotClearCache=Can not clear cache at this time # Security SFileReadAccess=The application has requested read access to {0}. Do you want to allow this action? SFileWriteAccess=The application has requested write access to {0}. Do you want to allow this action? SDesktopShortcut=The application has requested permission to create a desktop launcher. Do you want to allow this action? SSigUnverified=The application's digital signature cannot be verified. Do you want to run the application? SSigVerified=The application's digital signature has been verified. Do you want to run the application? SSignatureError=The application's digital signature has an error. Do you want to run the application? SUntrustedSource=The digital signature could not be verified by a trusted source. Only run if you trust the origin of the application. STrustedSource=The digital signature has been validated by a trusted source. SClipboardReadAccess=The application has requested read-only access to the system clipboard. Do you want to allow this action? SClipboardWriteAccess=The application has requested write-only access to the system clipboard. Do you want to allow this action? SPrinterAccess=The application has requested printer access. Do you want to allow this action? SNetworkAccess=The application has requested permission to establish connections to {0}. Do you want to allow this action? SNoAssociatedCertificate= SAlwaysTrustPublisher=Always trust content from this publisher SHttpsUnverified=The website's certificate cannot be verified. SNotAllSignedSummary=Only parts of this application code are signed. SNotAllSignedDetail=This application contains both signed and unsigned code. While signed code is safe if you trust the provider, unsigned code may imply code outside of the trusted provider's control. SNotAllSignedQuestion=Do you wish to proceed and run this application anyway? SAuthenticationPrompt=The {0} server at {1} is requesting authentication. It says "{2}" # Security - used for the More Information dialog SBadKeyUsage=Resources contain entries whose signer certificate's KeyUsage extension doesn't allow code signing. SBadExtendedKeyUsage=Resources contain entries whose signer certificate's ExtendedKeyUsage extension doesn't allow code signing. SBadNetscapeCertType=Resources contain entries whose signer certificate's NetscapeCertType extension doesn't allow code signing. SHasUnsignedEntry=Resources contain unsigned entries which have not been integrity-checked. SHasExpiredCert=The digital signature has expired. SHasExpiringCert=Resources contain entries whose signer certificate will expire within six months. SNotYetValidCert=Resources contain entries whose signer certificate is not yet valid. SUntrustedCertificate=The digital signature was generated with an untrusted certificate. STrustedCertificate=The digital signature was generated with a trusted certificate. SCNMisMatch=The expected hostname for this certificate is: "{0}"
The address being connected to is: "{1}" SRunWithoutRestrictions=This application will be run without the security restrictions normally provided by java. SCertificateDetails=Certificate Details # Security - certificate information SIssuer=Issuer SSerial=Serial SMD5Fingerprint=MD5 Fingerprint SSHA1Fingerprint=SHA1 Fingerprint SSignature=Signature SSignatureAlgorithm=Signature Algorithm SSubject=Subject SValidity=Validity # Certificate Viewer CVCertificateViewer=Certificates CVCertificateType=Certificate Type CVDetails=Details CVExport=Export CVImport=Import CVIssuedBy=Issued By CVIssuedTo=Issued To CVRemove=Remove CVRemoveConfirmMessage=Are you sure you want to remove the selected certificate? CVRemoveConfirmTitle=Confirmation - Remove Certificate? CVUser=User CVSystem=System #KeyStores: see KeyStores.java KS=KeyStore KSCerts=Trusted Certificates KSJsseCerts=Trusted JSSE Certificates KSCaCerts=Trusted Root CA Certificates KSJsseCaCerts=Trusted JSSE Root CA Certificates, KSClientCerts=Client Authentication Certificates # Deployment Configuration messages DCIncorrectValue=Property "{0}" has incorrect value "{1}". Possible values {2}. DCInternal=Internal error: {0} DCSourceInternal= DCUnknownSettingWithName=Property "{0}" is unknown. # Value Validator messages. Messages should follow "Possible values ..." VVPossibleValues=Possible values {0} VVPossibleBooleanValues=are {0} or {1} VVPossibleFileValues=include the absolute location of a file - it must begin with a / VVPossibleRangedIntegerValues=are in range {0} to {1} (inclusive) VVPossibleUrlValues=include any valid url (eg http://icedtea.classpath.org/hg/) # Control Panel - Main CPMainDescriptionShort=Configure IcedTea-Web CPMainDescriptionLong=Configure how the browser plugin (IcedTeaNPPlugin) and javaws (NetX) work # Control Panel - Tab Descriptions CPAboutDescription=View version information about Icedtea Control Panel. CPNetworkSettingsDescription=Configure network settings, including how IcedTea-Web connects to the internet and whether to use any proxies. CPTempInternetFilesDescription=Java stores application data for faster execution the next time you run it. CPJRESettingsDescription=View and manage Java Runtime Environment versions and settings for Java applications and applets. CPCertificatesDescription=Use certificates to positively identify yourself, certifications, authorities, and plublishers. CPSecurityDescription=Use this to configure security settings. CPDebuggingDescription=Enable options here to help with debugging CPDesktopIntegrationDescription=Set whether or not to allow creation of desktop shortcut. # Control Panel - Buttons CPButAbout=About... CPButNetworkSettings=Network Settings... CPButSettings=Settings... CPButView=View... CPButCertificates=Certificates... # Control Panel - Headers CPHead=IcedTea Web Control Panel CPHeadAbout=About CPHeadNetworkSettings=Network Proxy Settings CPHeadTempInternetFiles=Temporary Internet Files CPHeadJRESettings=Java Runtime Environment Settings CPHeadCertificates=Certificates CPHeadDebugging=Debugging Settings CPHeadDesktopIntegration=Desktop Integrations CPHeadSecurity=Security Settings # Control Panel - Tabs CPTabAbout=About IcedTea-Web CPTabCache=Cache CPTabCertificate=Certificates CPTabClassLoader=Class Loaders CPTabDebugging=Debugging CPTabDesktopIntegration=Desktop Integration CPTabNetwork=Network CPTabRuntimes=Runtimes CPTabSecurity=Security # Control Panel - AboutPanel CPAboutInfo=This is the control panel for setting deployments.properties.
Not all options will take effect until implemented.
The use of multiple JREs is currently unsupported.
# Control Panel - AdvancedProxySettings APSDialogTitle=Network Settings APSServersPanel=Servers APSProxyTypeLabel=Type APSProxyAddressLabel=Proxy Address APSProxyPortLabel=Proxy Port APSLabelHTTP=HTTP APSLabelSecure=Secure APSLabelFTP=FTP APSLabelSocks=Socks APSSameProxyForAllProtocols=Use the same proxy server for all protocols. APSExceptionsLabel=Exceptions APSExceptionsDescription=Do not use proxy server for addresses beginning with APSExceptionInstruction=Separate each entry with a semicolon. # Control Panel - DebugginPanel DPEnableTracing=Enable tracing DPEnableLogging=Enable logging DPLifeCycleExceptions=Show applet lifecycle exceptions DPDisable=Disable DPHide=Hide on startup DPShow=Show on startup DPJavaConsole=Java Console # Control Panel - DesktopShortcutPanel DSPNeverCreate=Never create DSPAlwaysAllow=Always allow DSPAskUser=Ask user DSPAskIfHinted=Ask if hinted DSPAlwaysIfHinted=Always if hinted # Control Panel - NetworkSettingsPanel NSDescription-1=Unknown Setting. NSDescription0=Use direct connection. NSDescription1=Override browser proxy settings. NSDescription2=Use automatic proxy configuration script at the specified location. NSDescription3=Use proxy settings from your default browser to connect to the internet. NSAddress=Address NSPort=Port NSAdvanced=Advanced NSBypassLocal=Bypass proxy server for local addresses NSDirectConnection=Direct connection NSManualProxy=Manual proxy server NSAutoProxy=Automatic proxy configuration script NSBrowserProxy=Use browser settings NSScriptLocation=Script location # Control Panel - SecurityGeneralPanel SGPAllowUserGrantSigned=Allow users to grant permissions to signed content SGPAllowUserGrantUntrust=Allow users to grant permissions to content from an untrusted authority SGPUseBrowserKeystore=Use certificates and keys in browser keystore (Unsupported) SGPUsePersonalCertOneMatch=Use personal certificate automatically if only one matches server request (Unsupported) SGPWarnCertHostMismatch=Warn if site certificate does not match hostname SGPShowValid=Show site certificate even if it is valid (Unsupported) SGPShowSandboxWarning=Show sandbox warning banner SGPAllowUserAcceptJNLPSecurityRequests=Allow user to accept JNLP security requests SGPCheckCertRevocationList=Check certificates for revocation using Certificate Revocation Lists (CRLs) (Unsupported) SGPEnableOnlineCertValidate=Enable online certificate validation (Unsupported) SGPEnableTrustedPublisherList=Enable list of trusted publishers (Unsupported) SGPEnableBlacklistRevocation=Enable blacklist revocation check (Unsupported) SGPEnableCachingPassword=Enable caching password for authentication (Unsupported) SGPUseSSL2=Use SSL 2.0 compatible ClientHello format (Unsupported) SGPUseSSL3=Use SSL 3.0 (Unsupported) SGPUseTLS1=Use TLS 1.0 (Unsupported) # Control Panel - TemporaryInternetFilesPanel TIFPEnableCache=Keep temporary files on my computer TIFPLocation=Location TIFPLocationLabel=Select the location where temporary files are kept TIFPChange=Change TIFPDiskSpace=Disk space TIFPCompressionLevel=Select the compression level for JAR files TIFPNone=None TIFPMax=Max TIFPCacheSize=Set the amount of disk space for storing temporary files TIFPDeleteFiles=Delete files TIFPViewFiles=View files... # Control Panel - Cache Viewer CVCPDialogTitle=Cache Viewer CVCPButRefresh=Refresh CVCPButDelete=Delete CVCPColLastModified=Last Modified CVCPColSize=Size (Bytes) CVCPColDomain=Domain CVCPColType=Type CVCPColPath=Path CVCPColName=Name # Control Panel - Misc. CPJRESupport=IcedTea-Web currently does not support the use of multiple JREs. # command line control panel CLNoInfo=No information avaiable (is this a valid option?). CLValue=Value: {0} CLValueSource=Source: {0} CLDescription=Description: {0} CLUnknownCommand=Unknown command {0} CLUnknownProperty=Unknown property-name "{0}" CLWarningUnknownProperty=WARNING: Unknown property name "{0}" - creating new property CLNoIssuesFound=No issues found. CLIncorrectValue=Property "{0}" has incorrect value "{1}". Possible values {2}. CLListDescription=Shows a list of all property names and values that are in use by IcedTea-Web CLGetDescription=Shows the value for property-name CLSetDescription=Sets the property-name to value if possible. The value is checked for being valid. If the administrator has locked the property, this will have no effect CLResetDescription=Resets the value for property-name to it\'s default value CLInfoDescription=Shows more information about the given property CLCheckDescription=Shows any properties that have been defined but are not recognized by IcedTea Web CLHelpDescription=The itweb-settings tool allows a user to modify, view and check configuration. \nTo use the GUI, do not pass any arguments. To use the CLI mode, pass in the approrpiate command and parameters. For help with a particular command, try: {0} command help