Adding libav (ffmpeg) header file, allowing upcoming dynamic linked GLMediaPlayer impl. to be compiled (LGPL terms)

Libav header:
  libavutil   51.22.1
  libavformat 53.21.0
  libavcodec  53.35.0

.. just to ease our compile time setup.

1 files changed, 591 insertions, 0 deletions

diff --git a/make/stub_includes/libav/libavutil/opt.h b/make/stub_includes/libav/libavutil/opt.h
new file mode 100644
index 000000000..19549408e
--- /dev/null
+++ b/make/stub_includes/libav/libavutil/opt.h
@@ -0,0 +1,591 @@
+/*
+ * AVOptions
+ * copyright (c) 2005 Michael Niedermayer <[email protected]>
+ *
+ * This file is part of Libav.
+ *
+ * Libav is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * Libav is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with Libav; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef AVUTIL_OPT_H
+#define AVUTIL_OPT_H
+
+/**
+ * @file
+ * AVOptions
+ */
+
+#include "rational.h"
+#include "avutil.h"
+#include "dict.h"
+#include "log.h"
+
+/**
+ * @defgroup avoptions AVOptions
+ * @ingroup lavu_data
+ * @{
+ * AVOptions provide a generic system to declare options on arbitrary structs
+ * ("objects"). An option can have a help text, a type and a range of possible
+ * values. Options may then be enumerated, read and written to.
+ *
+ * @section avoptions_implement Implementing AVOptions
+ * This section describes how to add AVOptions capabilities to a struct.
+ *
+ * All AVOptions-related information is stored in an AVClass. Therefore
+ * the first member of the struct must be a pointer to an AVClass describing it.
+ * The option field of the AVClass must be set to a NULL-terminated static array
+ * of AVOptions. Each AVOption must have a non-empty name, a type, a default
+ * value and for number-type AVOptions also a range of allowed values. It must
+ * also declare an offset in bytes from the start of the struct, where the field
+ * associated with this AVOption is located. Other fields in the AVOption struct
+ * should also be set when applicable, but are not required.
+ *
+ * The following example illustrates an AVOptions-enabled struct:
+ * @code
+ * typedef struct test_struct {
+ *     AVClass *class;
+ *     int      int_opt;
+ *     char    *str_opt;
+ *     uint8_t *bin_opt;
+ *     int      bin_len;
+ * } test_struct;
+ *
+ * static const AVOption options[] = {
+ *   { "test_int", "This is a test option of int type.", offsetof(test_struct, int_opt),
+ *     AV_OPT_TYPE_INT, { -1 }, INT_MIN, INT_MAX },
+ *   { "test_str", "This is a test option of string type.", offsetof(test_struct, str_opt),
+ *     AV_OPT_TYPE_STRING },
+ *   { "test_bin", "This is a test option of binary type.", offsetof(test_struct, bin_opt),
+ *     AV_OPT_TYPE_BINARY },
+ *   { NULL },
+ * };
+ *
+ * static const AVClass test_class = {
+ *     .class_name = "test class",
+ *     .item_name  = av_default_item_name,
+ *     .option     = options,
+ *     .version    = LIBAVUTIL_VERSION_INT,
+ * };
+ * @endcode
+ *
+ * Next, when allocating your struct, you must ensure that the AVClass pointer
+ * is set to the correct value. Then, av_opt_set_defaults() must be called to
+ * initialize defaults. After that the struct is ready to be used with the
+ * AVOptions API.
+ *
+ * When cleaning up, you may use the av_opt_free() function to automatically
+ * free all the allocated string and binary options.
+ *
+ * Continuing with the above example:
+ *
+ * @code
+ * test_struct *alloc_test_struct(void)
+ * {
+ *     test_struct *ret = av_malloc(sizeof(*ret));
+ *     ret->class = &test_class;
+ *     av_opt_set_defaults(ret);
+ *     return ret;
+ * }
+ * void free_test_struct(test_struct **foo)
+ * {
+ *     av_opt_free(*foo);
+ *     av_freep(foo);
+ * }
+ * @endcode
+ *
+ * @subsection avoptions_implement_nesting Nesting
+ *      It may happen that an AVOptions-enabled struct contains another
+ *      AVOptions-enabled struct as a member (e.g. AVCodecContext in
+ *      libavcodec exports generic options, while its priv_data field exports
+ *      codec-specific options). In such a case, it is possible to set up the
+ *      parent struct to export a child's options. To do that, simply
+ *      implement AVClass.child_next() and AVClass.child_class_next() in the
+ *      parent struct's AVClass.
+ *      Assuming that the test_struct from above now also contains a
+ *      child_struct field:
+ *
+ *      @code
+ *      typedef struct child_struct {
+ *          AVClass *class;
+ *          int flags_opt;
+ *      } child_struct;
+ *      static const AVOption child_opts[] = {
+ *          { "test_flags", "This is a test option of flags type.",
+ *            offsetof(child_struct, flags_opt), AV_OPT_TYPE_FLAGS, { 0 }, INT_MIN, INT_MAX },
+ *          { NULL },
+ *      };
+ *      static const AVClass child_class = {
+ *          .class_name = "child class",
+ *          .item_name  = av_default_item_name,
+ *          .option     = child_opts,
+ *          .version    = LIBAVUTIL_VERSION_INT,
+ *      };
+ *
+ *      void *child_next(void *obj, void *prev)
+ *      {
+ *          test_struct *t = obj;
+ *          if (!prev && t->child_struct)
+ *              return t->child_struct;
+ *          return NULL
+ *      }
+ *      const AVClass child_class_next(const AVClass *prev)
+ *      {
+ *          return prev ? NULL : &child_class;
+ *      }
+ *      @endcode
+ *      Putting child_next() and child_class_next() as defined above into
+ *      test_class will now make child_struct's options accessible through
+ *      test_struct (again, proper setup as described above needs to be done on
+ *      child_struct right after it is created).
+ *
+ *      From the above example it might not be clear why both child_next()
+ *      and child_class_next() are needed. The distinction is that child_next()
+ *      iterates over actually existing objects, while child_class_next()
+ *      iterates over all possible child classes. E.g. if an AVCodecContext
+ *      was initialized to use a codec which has private options, then its
+ *      child_next() will return AVCodecContext.priv_data and finish
+ *      iterating. OTOH child_class_next() on AVCodecContext.av_class will
+ *      iterate over all available codecs with private options.
+ *
+ * @subsection avoptions_implement_named_constants Named constants
+ *      It is possible to create named constants for options. Simply set the unit
+ *      field of the option the constants should apply to to a string and
+ *      create the constants themselves as options of type AV_OPT_TYPE_CONST
+ *      with their unit field set to the same string.
+ *      Their default_val field should contain the value of the named
+ *      constant.
+ *      For example, to add some named constants for the test_flags option
+ *      above, put the following into the child_opts array:
+ *      @code
+ *      { "test_flags", "This is a test option of flags type.",
+ *        offsetof(child_struct, flags_opt), AV_OPT_TYPE_FLAGS, { 0 }, INT_MIN, INT_MAX, "test_unit" },
+ *      { "flag1", "This is a flag with value 16", 0, AV_OPT_TYPE_CONST, { 16 }, 0, 0, "test_unit" },
+ *      @endcode
+ *
+ * @section avoptions_use Using AVOptions
+ * This section deals with accessing options in an AVOptions-enabled struct.
+ * Such structs in Libav are e.g. AVCodecContext in libavcodec or
+ * AVFormatContext in libavformat.
+ *
+ * @subsection avoptions_use_examine Examining AVOptions
+ * The basic functions for examining options are av_opt_next(), which iterates
+ * over all options defined for one object, and av_opt_find(), which searches
+ * for an option with the given name.
+ *
+ * The situation is more complicated with nesting. An AVOptions-enabled struct
+ * may have AVOptions-enabled children. Passing the AV_OPT_SEARCH_CHILDREN flag
+ * to av_opt_find() will make the function search children recursively.
+ *
+ * For enumerating there are basically two cases. The first is when you want to
+ * get all options that may potentially exist on the struct and its children
+ * (e.g.  when constructing documentation). In that case you should call
+ * av_opt_child_class_next() recursively on the parent struct's AVClass.  The
+ * second case is when you have an already initialized struct with all its
+ * children and you want to get all options that can be actually written or read
+ * from it. In that case you should call av_opt_child_next() recursively (and
+ * av_opt_next() on each result).
+ *
+ * @subsection avoptions_use_get_set Reading and writing AVOptions
+ * When setting options, you often have a string read directly from the
+ * user. In such a case, simply passing it to av_opt_set() is enough. For
+ * non-string type options, av_opt_set() will parse the string according to the
+ * option type.
+ *
+ * Similarly av_opt_get() will read any option type and convert it to a string
+ * which will be returned. Do not forget that the string is allocated, so you
+ * have to free it with av_free().
+ *
+ * In some cases it may be more convenient to put all options into an
+ * AVDictionary and call av_opt_set_dict() on it. A specific case of this
+ * are the format/codec open functions in lavf/lavc which take a dictionary
+ * filled with option as a parameter. This allows to set some options
+ * that cannot be set otherwise, since e.g. the input file format is not known
+ * before the file is actually opened.
+ */
+
+enum AVOptionType{
+    AV_OPT_TYPE_FLAGS,
+    AV_OPT_TYPE_INT,
+    AV_OPT_TYPE_INT64,
+    AV_OPT_TYPE_DOUBLE,
+    AV_OPT_TYPE_FLOAT,
+    AV_OPT_TYPE_STRING,
+    AV_OPT_TYPE_RATIONAL,
+    AV_OPT_TYPE_BINARY,  ///< offset must point to a pointer immediately followed by an int for the length
+    AV_OPT_TYPE_CONST = 128,
+#if FF_API_OLD_AVOPTIONS
+    FF_OPT_TYPE_FLAGS = 0,
+    FF_OPT_TYPE_INT,
+    FF_OPT_TYPE_INT64,
+    FF_OPT_TYPE_DOUBLE,
+    FF_OPT_TYPE_FLOAT,
+    FF_OPT_TYPE_STRING,
+    FF_OPT_TYPE_RATIONAL,
+    FF_OPT_TYPE_BINARY,  ///< offset must point to a pointer immediately followed by an int for the length
+    FF_OPT_TYPE_CONST=128,
+#endif
+};
+
+/**
+ * AVOption
+ */
+typedef struct AVOption {
+    const char *name;
+
+    /**
+     * short English help text
+     * @todo What about other languages?
+     */
+    const char *help;
+
+    /**
+     * The offset relative to the context structure where the option
+     * value is stored. It should be 0 for named constants.
+     */
+    int offset;
+    enum AVOptionType type;
+
+    /**
+     * the default value for scalar options
+     */
+    union {
+        double dbl;
+        const char *str;
+        /* TODO those are unused now */
+        int64_t i64;
+        AVRational q;
+    } default_val;
+    double min;                 ///< minimum valid value for the option
+    double max;                 ///< maximum valid value for the option
+
+    int flags;
+#define AV_OPT_FLAG_ENCODING_PARAM  1   ///< a generic parameter which can be set by the user for muxing or encoding
+#define AV_OPT_FLAG_DECODING_PARAM  2   ///< a generic parameter which can be set by the user for demuxing or decoding
+#define AV_OPT_FLAG_METADATA        4   ///< some data extracted or inserted into the file like title, comment, ...
+#define AV_OPT_FLAG_AUDIO_PARAM     8
+#define AV_OPT_FLAG_VIDEO_PARAM     16
+#define AV_OPT_FLAG_SUBTITLE_PARAM  32
+//FIXME think about enc-audio, ... style flags
+
+    /**
+     * The logical unit to which the option belongs. Non-constant
+     * options and corresponding named constants share the same
+     * unit. May be NULL.
+     */
+    const char *unit;
+} AVOption;
+
+#if FF_API_FIND_OPT
+/**
+ * Look for an option in obj. Look only for the options which
+ * have the flags set as specified in mask and flags (that is,
+ * for which it is the case that opt->flags & mask == flags).
+ *
+ * @param[in] obj a pointer to a struct whose first element is a
+ * pointer to an AVClass
+ * @param[in] name the name of the option to look for
+ * @param[in] unit the unit of the option to look for, or any if NULL
+ * @return a pointer to the option found, or NULL if no option
+ * has been found
+ *
+ * @deprecated use av_opt_find.
+ */
+attribute_deprecated
+const AVOption *av_find_opt(void *obj, const char *name, const char *unit, int mask, int flags);
+#endif
+
+#if FF_API_OLD_AVOPTIONS
+/**
+ * Set the field of obj with the given name to value.
+ *
+ * @param[in] obj A struct whose first element is a pointer to an
+ * AVClass.
+ * @param[in] name the name of the field to set
+ * @param[in] val The value to set. If the field is not of a string
+ * type, then the given string is parsed.
+ * SI postfixes and some named scalars are supported.
+ * If the field is of a numeric type, it has to be a numeric or named
+ * scalar. Behavior with more than one scalar and +- infix operators
+ * is undefined.
+ * If the field is of a flags type, it has to be a sequence of numeric
+ * scalars or named flags separated by '+' or '-'. Prefixing a flag
+ * with '+' causes it to be set without affecting the other flags;
+ * similarly, '-' unsets a flag.
+ * @param[out] o_out if non-NULL put here a pointer to the AVOption
+ * found
+ * @param alloc this parameter is currently ignored
+ * @return 0 if the value has been set, or an AVERROR code in case of
+ * error:
+ * AVERROR_OPTION_NOT_FOUND if no matching option exists
+ * AVERROR(ERANGE) if the value is out of range
+ * AVERROR(EINVAL) if the value is not valid
+ * @deprecated use av_opt_set()
+ */
+attribute_deprecated
+int av_set_string3(void *obj, const char *name, const char *val, int alloc, const AVOption **o_out);
+
+attribute_deprecated const AVOption *av_set_double(void *obj, const char *name, double n);
+attribute_deprecated const AVOption *av_set_q(void *obj, const char *name, AVRational n);
+attribute_deprecated const AVOption *av_set_int(void *obj, const char *name, int64_t n);
+
+attribute_deprecated double av_get_double(void *obj, const char *name, const AVOption **o_out);
+attribute_deprecated AVRational av_get_q(void *obj, const char *name, const AVOption **o_out);
+attribute_deprecated int64_t av_get_int(void *obj, const char *name, const AVOption **o_out);
+attribute_deprecated const char *av_get_string(void *obj, const char *name, const AVOption **o_out, char *buf, int buf_len);
+attribute_deprecated const AVOption *av_next_option(void *obj, const AVOption *last);
+#endif
+
+/**
+ * Show the obj options.
+ *
+ * @param req_flags requested flags for the options to show. Show only the
+ * options for which it is opt->flags & req_flags.
+ * @param rej_flags rejected flags for the options to show. Show only the
+ * options for which it is !(opt->flags & req_flags).
+ * @param av_log_obj log context to use for showing the options
+ */
+int av_opt_show2(void *obj, void *av_log_obj, int req_flags, int rej_flags);
+
+/**
+ * Set the values of all AVOption fields to their default values.
+ *
+ * @param s an AVOption-enabled struct (its first member must be a pointer to AVClass)
+ */
+void av_opt_set_defaults(void *s);
+
+#if FF_API_OLD_AVOPTIONS
+attribute_deprecated
+void av_opt_set_defaults2(void *s, int mask, int flags);
+#endif
+
+/**
+ * Parse the key/value pairs list in opts. For each key/value pair
+ * found, stores the value in the field in ctx that is named like the
+ * key. ctx must be an AVClass context, storing is done using
+ * AVOptions.
+ *
+ * @param key_val_sep a 0-terminated list of characters used to
+ * separate key from value
+ * @param pairs_sep a 0-terminated list of characters used to separate
+ * two pairs from each other
+ * @return the number of successfully set key/value pairs, or a negative
+ * value corresponding to an AVERROR code in case of error:
+ * AVERROR(EINVAL) if opts cannot be parsed,
+ * the error code issued by av_set_string3() if a key/value pair
+ * cannot be set
+ */
+int av_set_options_string(void *ctx, const char *opts,
+                          const char *key_val_sep, const char *pairs_sep);
+
+/**
+ * Free all string and binary options in obj.
+ */
+void av_opt_free(void *obj);
+
+/**
+ * Check whether a particular flag is set in a flags field.
+ *
+ * @param field_name the name of the flag field option
+ * @param flag_name the name of the flag to check
+ * @return non-zero if the flag is set, zero if the flag isn't set,
+ *         isn't of the right type, or the flags field doesn't exist.
+ */
+int av_opt_flag_is_set(void *obj, const char *field_name, const char *flag_name);
+
+/*
+ * Set all the options from a given dictionary on an object.
+ *
+ * @param obj a struct whose first element is a pointer to AVClass
+ * @param options options to process. This dictionary will be freed and replaced
+ *                by a new one containing all options not found in obj.
+ *                Of course this new dictionary needs to be freed by caller
+ *                with av_dict_free().
+ *
+ * @return 0 on success, a negative AVERROR if some option was found in obj,
+ *         but could not be set.
+ *
+ * @see av_dict_copy()
+ */
+int av_opt_set_dict(void *obj, struct AVDictionary **options);
+
+/**
+ * @defgroup opt_eval_funcs Evaluating option strings
+ * @{
+ * This group of functions can be used to evaluate option strings
+ * and get numbers out of them. They do the same thing as av_opt_set(),
+ * except the result is written into the caller-supplied pointer.
+ *
+ * @param obj a struct whose first element is a pointer to AVClass.
+ * @param o an option for which the string is to be evaluated.
+ * @param val string to be evaluated.
+ * @param *_out value of the string will be written here.
+ *
+ * @return 0 on success, a negative number on failure.
+ */
+int av_opt_eval_flags (void *obj, const AVOption *o, const char *val, int        *flags_out);
+int av_opt_eval_int   (void *obj, const AVOption *o, const char *val, int        *int_out);
+int av_opt_eval_int64 (void *obj, const AVOption *o, const char *val, int64_t    *int64_out);
+int av_opt_eval_float (void *obj, const AVOption *o, const char *val, float      *float_out);
+int av_opt_eval_double(void *obj, const AVOption *o, const char *val, double     *double_out);
+int av_opt_eval_q     (void *obj, const AVOption *o, const char *val, AVRational *q_out);
+/**
+ * @}
+ */
+
+#define AV_OPT_SEARCH_CHILDREN   0x0001 /**< Search in possible children of the
+                                             given object first. */
+/**
+ *  The obj passed to av_opt_find() is fake -- only a double pointer to AVClass
+ *  instead of a required pointer to a struct containing AVClass. This is
+ *  useful for searching for options without needing to allocate the corresponding
+ *  object.
+ */
+#define AV_OPT_SEARCH_FAKE_OBJ   0x0002
+
+/**
+ * Look for an option in an object. Consider only options which
+ * have all the specified flags set.
+ *
+ * @param[in] obj A pointer to a struct whose first element is a
+ *                pointer to an AVClass.
+ *                Alternatively a double pointer to an AVClass, if
+ *                AV_OPT_SEARCH_FAKE_OBJ search flag is set.
+ * @param[in] name The name of the option to look for.
+ * @param[in] unit When searching for named constants, name of the unit
+ *                 it belongs to.
+ * @param opt_flags Find only options with all the specified flags set (AV_OPT_FLAG).
+ * @param search_flags A combination of AV_OPT_SEARCH_*.
+ *
+ * @return A pointer to the option found, or NULL if no option
+ *         was found.
+ *
+ * @note Options found with AV_OPT_SEARCH_CHILDREN flag may not be settable
+ * directly with av_set_string3(). Use special calls which take an options
+ * AVDictionary (e.g. avformat_open_input()) to set options found with this
+ * flag.
+ */
+const AVOption *av_opt_find(void *obj, const char *name, const char *unit,
+                            int opt_flags, int search_flags);
+
+/**
+ * Look for an option in an object. Consider only options which
+ * have all the specified flags set.
+ *
+ * @param[in] obj A pointer to a struct whose first element is a
+ *                pointer to an AVClass.
+ *                Alternatively a double pointer to an AVClass, if
+ *                AV_OPT_SEARCH_FAKE_OBJ search flag is set.
+ * @param[in] name The name of the option to look for.
+ * @param[in] unit When searching for named constants, name of the unit
+ *                 it belongs to.
+ * @param opt_flags Find only options with all the specified flags set (AV_OPT_FLAG).
+ * @param search_flags A combination of AV_OPT_SEARCH_*.
+ * @param[out] target_obj if non-NULL, an object to which the option belongs will be
+ * written here. It may be different from obj if AV_OPT_SEARCH_CHILDREN is present
+ * in search_flags. This parameter is ignored if search_flags contain
+ * AV_OPT_SEARCH_FAKE_OBJ.
+ *
+ * @return A pointer to the option found, or NULL if no option
+ *         was found.
+ */
+const AVOption *av_opt_find2(void *obj, const char *name, const char *unit,
+                             int opt_flags, int search_flags, void **target_obj);
+
+/**
+ * Iterate over all AVOptions belonging to obj.
+ *
+ * @param obj an AVOptions-enabled struct or a double pointer to an
+ *            AVClass describing it.
+ * @param prev result of the previous call to av_opt_next() on this object
+ *             or NULL
+ * @return next AVOption or NULL
+ */
+const AVOption *av_opt_next(void *obj, const AVOption *prev);
+
+/**
+ * Iterate over AVOptions-enabled children of obj.
+ *
+ * @param prev result of a previous call to this function or NULL
+ * @return next AVOptions-enabled child or NULL
+ */
+void *av_opt_child_next(void *obj, void *prev);
+
+/**
+ * Iterate over potential AVOptions-enabled children of parent.
+ *
+ * @param prev result of a previous call to this function or NULL
+ * @return AVClass corresponding to next potential child or NULL
+ */
+const AVClass *av_opt_child_class_next(const AVClass *parent, const AVClass *prev);
+
+/**
+ * @defgroup opt_set_funcs Option setting functions
+ * @{
+ * Those functions set the field of obj with the given name to value.
+ *
+ * @param[in] obj A struct whose first element is a pointer to an AVClass.
+ * @param[in] name the name of the field to set
+ * @param[in] val The value to set. In case of av_opt_set() if the field is not
+ * of a string type, then the given string is parsed.
+ * SI postfixes and some named scalars are supported.
+ * If the field is of a numeric type, it has to be a numeric or named
+ * scalar. Behavior with more than one scalar and +- infix operators
+ * is undefined.
+ * If the field is of a flags type, it has to be a sequence of numeric
+ * scalars or named flags separated by '+' or '-'. Prefixing a flag
+ * with '+' causes it to be set without affecting the other flags;
+ * similarly, '-' unsets a flag.
+ * @param search_flags flags passed to av_opt_find2. I.e. if AV_OPT_SEARCH_CHILDREN
+ * is passed here, then the option may be set on a child of obj.
+ *
+ * @return 0 if the value has been set, or an AVERROR code in case of
+ * error:
+ * AVERROR_OPTION_NOT_FOUND if no matching option exists
+ * AVERROR(ERANGE) if the value is out of range
+ * AVERROR(EINVAL) if the value is not valid
+ */
+int av_opt_set       (void *obj, const char *name, const char *val, int search_flags);
+int av_opt_set_int   (void *obj, const char *name, int64_t     val, int search_flags);
+int av_opt_set_double(void *obj, const char *name, double      val, int search_flags);
+int av_opt_set_q     (void *obj, const char *name, AVRational  val, int search_flags);
+/**
+ * @}
+ */
+
+/**
+ * @defgroup opt_get_funcs Option getting functions
+ * @{
+ * Those functions get a value of the option with the given name from an object.
+ *
+ * @param[in] obj a struct whose first element is a pointer to an AVClass.
+ * @param[in] name name of the option to get.
+ * @param[in] search_flags flags passed to av_opt_find2. I.e. if AV_OPT_SEARCH_CHILDREN
+ * is passed here, then the option may be found in a child of obj.
+ * @param[out] out_val value of the option will be written here
+ * @return 0 on success, a negative error code otherwise
+ */
+/**
+ * @note the returned string will av_malloc()ed and must be av_free()ed by the caller
+ */
+int av_opt_get       (void *obj, const char *name, int search_flags, uint8_t   **out_val);
+int av_opt_get_int   (void *obj, const char *name, int search_flags, int64_t    *out_val);
+int av_opt_get_double(void *obj, const char *name, int search_flags, double     *out_val);
+int av_opt_get_q     (void *obj, const char *name, int search_flags, AVRational *out_val);
+/**
+ * @}
+ * @}
+ */
+
+#endif /* AVUTIL_OPT_H */