diff options
Diffstat (limited to 'tools/jackpotc/test/oldgears/nbproject/build-impl.xml')
| -rw-r--r-- | tools/jackpotc/test/oldgears/nbproject/build-impl.xml | 883 |
1 files changed, 883 insertions, 0 deletions
diff --git a/tools/jackpotc/test/oldgears/nbproject/build-impl.xml b/tools/jackpotc/test/oldgears/nbproject/build-impl.xml new file mode 100644 index 000000000..80f4e3647 --- /dev/null +++ b/tools/jackpotc/test/oldgears/nbproject/build-impl.xml @@ -0,0 +1,883 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- +*** GENERATED FROM project.xml - DO NOT EDIT *** +*** EDIT ../build.xml INSTEAD *** + +For the purpose of easier reading the script +is divided into following sections: + + - initialization + - compilation + - jar + - execution + - debugging + - javadoc + - junit compilation + - junit execution + - junit debugging + - applet + - cleanup + + --> +<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="oldgears-impl"> + <fail message="Please build using Ant 1.7.1 or higher."> + <condition> + <not> + <antversion atleast="1.7.1"/> + </not> + </condition> + </fail> + <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/> + <!-- + ====================== + INITIALIZATION SECTION + ====================== + --> + <target name="-pre-init"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="-pre-init" name="-init-private"> + <property file="nbproject/private/config.properties"/> + <property file="nbproject/private/configs/${config}.properties"/> + <property file="nbproject/private/private.properties"/> + </target> + <target depends="-pre-init,-init-private" name="-init-user"> + <property file="${user.properties.file}"/> + <!-- The two properties below are usually overridden --> + <!-- by the active platform. Just a fallback. --> + <property name="default.javac.source" value="1.4"/> + <property name="default.javac.target" value="1.4"/> + </target> + <target depends="-pre-init,-init-private,-init-user" name="-init-project"> + <property file="nbproject/configs/${config}.properties"/> + <property file="nbproject/project.properties"/> + </target> + <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init"> + <available file="${manifest.file}" property="manifest.available"/> + <available file="${application.splash}" property="splashscreen.available"/> + <condition property="main.class.available"> + <and> + <isset property="main.class"/> + <not> + <equals arg1="${main.class}" arg2="" trim="true"/> + </not> + </and> + </condition> + <condition property="manifest.available+main.class"> + <and> + <isset property="manifest.available"/> + <isset property="main.class.available"/> + </and> + </condition> + <condition property="do.mkdist"> + <and> + <isset property="libs.CopyLibs.classpath"/> + <not> + <istrue value="${mkdist.disabled}"/> + </not> + </and> + </condition> + <condition property="manifest.available+main.class+mkdist.available"> + <and> + <istrue value="${manifest.available+main.class}"/> + <isset property="do.mkdist"/> + </and> + </condition> + <condition property="manifest.available+main.class+mkdist.available+splashscreen.available"> + <and> + <istrue value="${manifest.available+main.class+mkdist.available}"/> + <istrue value="${splashscreen.available}"/> + </and> + </condition> + <condition property="do.archive"> + <not> + <istrue value="${jar.archive.disabled}"/> + </not> + </condition> + <condition property="do.archive+manifest.available"> + <and> + <isset property="manifest.available"/> + <istrue value="${do.archive}"/> + </and> + </condition> + <condition property="do.archive+manifest.available+main.class"> + <and> + <istrue value="${manifest.available+main.class}"/> + <istrue value="${do.archive}"/> + </and> + </condition> + <condition property="do.archive+manifest.available+main.class+mkdist.available"> + <and> + <istrue value="${manifest.available+main.class+mkdist.available}"/> + <istrue value="${do.archive}"/> + </and> + </condition> + <condition property="do.archive+manifest.available+main.class+mkdist.available+splashscreen.available"> + <and> + <istrue value="${manifest.available+main.class+mkdist.available+splashscreen.available}"/> + <istrue value="${do.archive}"/> + </and> + </condition> + <condition property="have.tests"> + <or> + <available file="${test.src.dir}"/> + </or> + </condition> + <condition property="have.sources"> + <or> + <available file="${src.dir}"/> + </or> + </condition> + <condition property="netbeans.home+have.tests"> + <and> + <isset property="netbeans.home"/> + <isset property="have.tests"/> + </and> + </condition> + <condition property="no.javadoc.preview"> + <and> + <isset property="javadoc.preview"/> + <isfalse value="${javadoc.preview}"/> + </and> + </condition> + <property name="run.jvmargs" value=""/> + <property name="javac.compilerargs" value=""/> + <property name="work.dir" value="${basedir}"/> + <condition property="no.deps"> + <and> + <istrue value="${no.dependencies}"/> + </and> + </condition> + <property name="javac.debug" value="true"/> + <property name="javadoc.preview" value="true"/> + <property name="application.args" value=""/> + <property name="source.encoding" value="${file.encoding}"/> + <property name="runtime.encoding" value="${source.encoding}"/> + <condition property="javadoc.encoding.used" value="${javadoc.encoding}"> + <and> + <isset property="javadoc.encoding"/> + <not> + <equals arg1="${javadoc.encoding}" arg2=""/> + </not> + </and> + </condition> + <property name="javadoc.encoding.used" value="${source.encoding}"/> + <property name="includes" value="**"/> + <property name="excludes" value=""/> + <property name="do.depend" value="false"/> + <condition property="do.depend.true"> + <istrue value="${do.depend}"/> + </condition> + <path id="endorsed.classpath.path" path="${endorsed.classpath}"/> + <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'"> + <length length="0" string="${endorsed.classpath}" when="greater"/> + </condition> + <property name="javac.fork" value="false"/> + <property name="jar.index" value="false"/> + <available file="${meta.inf.dir}/persistence.xml" property="has.persistence.xml"/> + </target> + <target name="-post-init"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check"> + <fail unless="src.dir">Must set src.dir</fail> + <fail unless="test.src.dir">Must set test.src.dir</fail> + <fail unless="build.dir">Must set build.dir</fail> + <fail unless="dist.dir">Must set dist.dir</fail> + <fail unless="build.classes.dir">Must set build.classes.dir</fail> + <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail> + <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail> + <fail unless="build.test.results.dir">Must set build.test.results.dir</fail> + <fail unless="build.classes.excludes">Must set build.classes.excludes</fail> + <fail unless="dist.jar">Must set dist.jar</fail> + </target> + <target name="-init-macrodef-property"> + <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1"> + <attribute name="name"/> + <attribute name="value"/> + <sequential> + <property name="@{name}" value="${@{value}}"/> + </sequential> + </macrodef> + </target> + <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-macrodef-javac-with-processors"> + <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3"> + <attribute default="${src.dir}" name="srcdir"/> + <attribute default="${build.classes.dir}" name="destdir"/> + <attribute default="${javac.classpath}" name="classpath"/> + <attribute default="${javac.processorpath}" name="processorpath"/> + <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/> + <attribute default="${includes}" name="includes"/> + <attribute default="${excludes}" name="excludes"/> + <attribute default="${javac.debug}" name="debug"/> + <attribute default="${empty.dir}" name="sourcepath"/> + <attribute default="${empty.dir}" name="gensrcdir"/> + <element name="customize" optional="true"/> + <sequential> + <property location="${build.dir}/empty" name="empty.dir"/> + <mkdir dir="${empty.dir}"/> + <mkdir dir="@{apgeneratedsrcdir}"/> + <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}"> + <src> + <dirset dir="@{gensrcdir}" erroronmissingdir="false"> + <include name="*"/> + </dirset> + </src> + <classpath> + <path path="@{classpath}"/> + </classpath> + <compilerarg line="${endorsed.classpath.cmd.line.arg}"/> + <compilerarg line="${javac.compilerargs}"/> + <compilerarg value="-processorpath"/> + <compilerarg path="@{processorpath}"/> + <compilerarg line="${ap.processors.internal}"/> + <compilerarg line="${annotation.processing.processor.options}"/> + <compilerarg value="-s"/> + <compilerarg path="@{apgeneratedsrcdir}"/> + <compilerarg line="${ap.proc.none.internal}"/> + <customize/> + </javac> + </sequential> + </macrodef> + </target> + <target depends="-init-ap-cmdline-properties" name="-init-macrodef-javac-without-processors" unless="ap.supported.internal"> + <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3"> + <attribute default="${src.dir}" name="srcdir"/> + <attribute default="${build.classes.dir}" name="destdir"/> + <attribute default="${javac.classpath}" name="classpath"/> + <attribute default="${javac.processorpath}" name="processorpath"/> + <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/> + <attribute default="${includes}" name="includes"/> + <attribute default="${excludes}" name="excludes"/> + <attribute default="${javac.debug}" name="debug"/> + <attribute default="${empty.dir}" name="sourcepath"/> + <attribute default="${empty.dir}" name="gensrcdir"/> + <element name="customize" optional="true"/> + <sequential> + <property location="${build.dir}/empty" name="empty.dir"/> + <mkdir dir="${empty.dir}"/> + <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}"> + <src> + <dirset dir="@{gensrcdir}" erroronmissingdir="false"> + <include name="*"/> + </dirset> + </src> + <classpath> + <path path="@{classpath}"/> + </classpath> + <compilerarg line="${endorsed.classpath.cmd.line.arg}"/> + <compilerarg line="${javac.compilerargs}"/> + <customize/> + </javac> + </sequential> + </macrodef> + </target> + <target depends="-init-macrodef-javac-with-processors,-init-macrodef-javac-without-processors" name="-init-macrodef-javac"> + <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3"> + <attribute default="${src.dir}" name="srcdir"/> + <attribute default="${build.classes.dir}" name="destdir"/> + <attribute default="${javac.classpath}" name="classpath"/> + <sequential> + <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}"> + <classpath> + <path path="@{classpath}"/> + </classpath> + </depend> + </sequential> + </macrodef> + <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3"> + <attribute default="${build.classes.dir}" name="destdir"/> + <sequential> + <fail unless="javac.includes">Must set javac.includes</fail> + <pathconvert pathsep="," property="javac.includes.binary"> + <path> + <filelist dir="@{destdir}" files="${javac.includes}"/> + </path> + <globmapper from="*.java" to="*.class"/> + </pathconvert> + <delete> + <files includes="${javac.includes.binary}"/> + </delete> + </sequential> + </macrodef> + </target> + <target name="-init-macrodef-junit"> + <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3"> + <attribute default="${includes}" name="includes"/> + <attribute default="${excludes}" name="excludes"/> + <attribute default="**" name="testincludes"/> + <sequential> + <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true" tempdir="${build.dir}"> + <batchtest todir="${build.test.results.dir}"> + <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}"> + <filename name="@{testincludes}"/> + </fileset> + </batchtest> + <classpath> + <path path="${run.test.classpath}"/> + </classpath> + <syspropertyset> + <propertyref prefix="test-sys-prop."/> + <mapper from="test-sys-prop.*" to="*" type="glob"/> + </syspropertyset> + <formatter type="brief" usefile="false"/> + <formatter type="xml"/> + <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> + <jvmarg line="${run.jvmargs}"/> + </junit> + </sequential> + </macrodef> + </target> + <target depends="-init-debug-args" name="-init-macrodef-nbjpda"> + <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1"> + <attribute default="${main.class}" name="name"/> + <attribute default="${debug.classpath}" name="classpath"/> + <attribute default="" name="stopclassname"/> + <sequential> + <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}"> + <classpath> + <path path="@{classpath}"/> + </classpath> + </nbjpdastart> + </sequential> + </macrodef> + <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1"> + <attribute default="${build.classes.dir}" name="dir"/> + <sequential> + <nbjpdareload> + <fileset dir="@{dir}" includes="${fix.classes}"> + <include name="${fix.includes}*.class"/> + </fileset> + </nbjpdareload> + </sequential> + </macrodef> + </target> + <target name="-init-debug-args"> + <property name="version-output" value="java version "${ant.java.version}"/> + <condition property="have-jdk-older-than-1.4"> + <or> + <contains string="${version-output}" substring="java version "1.0"/> + <contains string="${version-output}" substring="java version "1.1"/> + <contains string="${version-output}" substring="java version "1.2"/> + <contains string="${version-output}" substring="java version "1.3"/> + </or> + </condition> + <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none"> + <istrue value="${have-jdk-older-than-1.4}"/> + </condition> + <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem"> + <os family="windows"/> + </condition> + <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}"> + <isset property="debug.transport"/> + </condition> + </target> + <target depends="-init-debug-args" name="-init-macrodef-debug"> + <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3"> + <attribute default="${main.class}" name="classname"/> + <attribute default="${debug.classpath}" name="classpath"/> + <element name="customize" optional="true"/> + <sequential> + <java classname="@{classname}" dir="${work.dir}" fork="true"> + <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> + <jvmarg line="${debug-args-line}"/> + <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/> + <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> + <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> + <jvmarg line="${run.jvmargs}"/> + <classpath> + <path path="@{classpath}"/> + </classpath> + <syspropertyset> + <propertyref prefix="run-sys-prop."/> + <mapper from="run-sys-prop.*" to="*" type="glob"/> + </syspropertyset> + <customize/> + </java> + </sequential> + </macrodef> + </target> + <target name="-init-macrodef-java"> + <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1"> + <attribute default="${main.class}" name="classname"/> + <attribute default="${run.classpath}" name="classpath"/> + <element name="customize" optional="true"/> + <sequential> + <java classname="@{classname}" dir="${work.dir}" fork="true"> + <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> + <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> + <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> + <jvmarg line="${run.jvmargs}"/> + <classpath> + <path path="@{classpath}"/> + </classpath> + <syspropertyset> + <propertyref prefix="run-sys-prop."/> + <mapper from="run-sys-prop.*" to="*" type="glob"/> + </syspropertyset> + <customize/> + </java> + </sequential> + </macrodef> + </target> + <target name="-init-macrodef-copylibs"> + <macrodef name="copylibs" uri="http://www.netbeans.org/ns/j2se-project/3"> + <element name="customize" optional="true"/> + <sequential> + <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> + <pathconvert property="run.classpath.without.build.classes.dir"> + <path path="${run.classpath}"/> + <map from="${build.classes.dir.resolved}" to=""/> + </pathconvert> + <pathconvert pathsep=" " property="jar.classpath"> + <path path="${run.classpath.without.build.classes.dir}"/> + <chainedmapper> + <flattenmapper/> + <globmapper from="*" to="lib/*"/> + </chainedmapper> + </pathconvert> + <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> + <copylibs compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> + <fileset dir="${build.classes.dir}"/> + <manifest> + <attribute name="Class-Path" value="${jar.classpath}"/> + <customize/> + </manifest> + </copylibs> + </sequential> + </macrodef> + </target> + <target name="-init-presetdef-jar"> + <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1"> + <jar compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}"> + <j2seproject1:fileset dir="${build.classes.dir}"/> + </jar> + </presetdef> + </target> + <target name="-init-ap-cmdline-properties"> + <property name="annotation.processing.enabled" value="true"/> + <property name="annotation.processing.processors.list" value=""/> + <property name="annotation.processing.processor.options" value=""/> + <property name="annotation.processing.run.all.processors" value="true"/> + <property name="javac.processorpath" value="${javac.classpath}"/> + <property name="javac.test.processorpath" value="${javac.test.classpath}"/> + <condition property="ap.supported.internal" value="true"> + <not> + <matches pattern="1\.[0-5](\..*)?" string="${javac.source}"/> + </not> + </condition> + </target> + <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-ap-cmdline-supported"> + <condition else="" property="ap.processors.internal" value="-processor ${annotation.processing.processors.list}"> + <isfalse value="${annotation.processing.run.all.processors}"/> + </condition> + <condition else="" property="ap.proc.none.internal" value="-proc:none"> + <isfalse value="${annotation.processing.enabled}"/> + </condition> + </target> + <target depends="-init-ap-cmdline-properties,-init-ap-cmdline-supported" name="-init-ap-cmdline"> + <property name="ap.cmd.line.internal" value=""/> + </target> + <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar,-init-ap-cmdline" name="init"/> + <!-- + =================== + COMPILATION SECTION + =================== + --> + <target name="-deps-jar-init" unless="built-jar.properties"> + <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/> + <delete file="${built-jar.properties}" quiet="true"/> + </target> + <target if="already.built.jar.${basedir}" name="-warn-already-built-jar"> + <echo level="warn" message="Cycle detected: oldgears was already built"/> + </target> + <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps"> + <mkdir dir="${build.dir}"/> + <touch file="${built-jar.properties}" verbose="false"/> + <property file="${built-jar.properties}" prefix="already.built.jar."/> + <antcall target="-warn-already-built-jar"/> + <propertyfile file="${built-jar.properties}"> + <entry key="${basedir}" value=""/> + </propertyfile> + </target> + <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/> + <target depends="init" name="-check-automatic-build"> + <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/> + </target> + <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build"> + <antcall target="clean"/> + </target> + <target depends="init,deps-jar" name="-pre-pre-compile"> + <mkdir dir="${build.classes.dir}"/> + </target> + <target name="-pre-compile"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target if="do.depend.true" name="-compile-depend"> + <pathconvert property="build.generated.subdirs"> + <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false"> + <include name="*"/> + </dirset> + </pathconvert> + <j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/> + </target> + <target depends="init,deps-jar,-pre-pre-compile,-pre-compile, -copy-persistence-xml,-compile-depend" if="have.sources" name="-do-compile"> + <j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/> + <copy todir="${build.classes.dir}"> + <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> + </copy> + </target> + <target if="has.persistence.xml" name="-copy-persistence-xml"> + <mkdir dir="${build.classes.dir}/META-INF"/> + <copy todir="${build.classes.dir}/META-INF"> + <fileset dir="${meta.inf.dir}" includes="persistence.xml"/> + </copy> + </target> + <target name="-post-compile"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/> + <target name="-pre-compile-single"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single"> + <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> + <j2seproject3:force-recompile/> + <j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/> + </target> + <target name="-post-compile-single"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/> + <!-- + ==================== + JAR BUILDING SECTION + ==================== + --> + <target depends="init" name="-pre-pre-jar"> + <dirname file="${dist.jar}" property="dist.jar.dir"/> + <mkdir dir="${dist.jar.dir}"/> + </target> + <target name="-pre-jar"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive" name="-do-jar-without-manifest" unless="manifest.available"> + <j2seproject1:jar/> + </target> + <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class"> + <j2seproject1:jar manifest="${manifest.file}"/> + </target> + <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available"> + <j2seproject1:jar manifest="${manifest.file}"> + <j2seproject1:manifest> + <j2seproject1:attribute name="Main-Class" value="${main.class}"/> + </j2seproject1:manifest> + </j2seproject1:jar> + <echo>To run this application from the command line without Ant, try:</echo> + <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> + <property location="${dist.jar}" name="dist.jar.resolved"/> + <pathconvert property="run.classpath.with.dist.jar"> + <path path="${run.classpath}"/> + <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/> + </pathconvert> + <echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo> + </target> + <target depends="init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if="do.archive+manifest.available+main.class+mkdist.available+splashscreen.available" name="-do-jar-with-libraries-and-splashscreen"> + <basename file="${application.splash}" property="splashscreen.basename"/> + <mkdir dir="${build.classes.dir}/META-INF"/> + <copy failonerror="false" file="${application.splash}" todir="${build.classes.dir}/META-INF"/> + <j2seproject3:copylibs> + <customize> + <attribute name="Main-Class" value="${main.class}"/> + <attribute name="SplashScreen-Image" value="META-INF/${splashscreen.basename}"/> + </customize> + </j2seproject3:copylibs> + <echo>To run this application from the command line without Ant, try:</echo> + <property location="${dist.jar}" name="dist.jar.resolved"/> + <echo>java -jar "${dist.jar.resolved}"</echo> + </target> + <target depends="init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if="do.archive+manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries" unless="splashscreen.available"> + <j2seproject3:copylibs> + <customize> + <attribute name="Main-Class" value="${main.class}"/> + </customize> + </j2seproject3:copylibs> + <echo>To run this application from the command line without Ant, try:</echo> + <property location="${dist.jar}" name="dist.jar.resolved"/> + <echo>java -jar "${dist.jar.resolved}"</echo> + </target> + <target name="-post-jar"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries-and-splashscreen,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/> + <!-- + ================= + EXECUTION SECTION + ================= + --> + <target depends="init,compile" description="Run a main class." name="run"> + <j2seproject1:java> + <customize> + <arg line="${application.args}"/> + </customize> + </j2seproject1:java> + </target> + <target name="-do-not-recompile"> + <property name="javac.includes.binary" value=""/> + </target> + <target depends="init,compile-single" name="run-single"> + <fail unless="run.class">Must select one file in the IDE or set run.class</fail> + <j2seproject1:java classname="${run.class}"/> + </target> + <target depends="init,compile-test-single" name="run-test-with-main"> + <fail unless="run.class">Must select one file in the IDE or set run.class</fail> + <j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/> + </target> + <!-- + ================= + DEBUGGING SECTION + ================= + --> + <target depends="init" if="netbeans.home" name="-debug-start-debugger"> + <j2seproject1:nbjpdastart name="${debug.class}"/> + </target> + <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test"> + <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/> + </target> + <target depends="init,compile" name="-debug-start-debuggee"> + <j2seproject3:debug> + <customize> + <arg line="${application.args}"/> + </customize> + </j2seproject3:debug> + </target> + <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/> + <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto"> + <j2seproject1:nbjpdastart stopclassname="${main.class}"/> + </target> + <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/> + <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single"> + <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> + <j2seproject3:debug classname="${debug.class}"/> + </target> + <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/> + <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test"> + <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> + <j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/> + </target> + <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/> + <target depends="init" name="-pre-debug-fix"> + <fail unless="fix.includes">Must set fix.includes</fail> + <property name="javac.includes" value="${fix.includes}.java"/> + </target> + <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix"> + <j2seproject1:nbjpdareload/> + </target> + <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/> + <!-- + =============== + JAVADOC SECTION + =============== + --> + <target depends="init" if="have.sources" name="-javadoc-build"> + <mkdir dir="${dist.javadoc.dir}"/> + <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}"> + <classpath> + <path path="${javac.classpath}"/> + </classpath> + <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}"> + <filename name="**/*.java"/> + </fileset> + <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false"> + <include name="**/*.java"/> + </fileset> + </javadoc> + </target> + <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview"> + <nbbrowse file="${dist.javadoc.dir}/index.html"/> + </target> + <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/> + <!-- + ========================= + JUNIT COMPILATION SECTION + ========================= + --> + <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test"> + <mkdir dir="${build.test.classes.dir}"/> + </target> + <target name="-pre-compile-test"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target if="do.depend.true" name="-compile-test-depend"> + <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/> + </target> + <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test"> + <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" processorpath="${javac.test.processorpath}" srcdir="${test.src.dir}"/> + <copy todir="${build.test.classes.dir}"> + <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> + </copy> + </target> + <target name="-post-compile-test"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/> + <target name="-pre-compile-test-single"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single"> + <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> + <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/> + <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" processorpath="${javac.test.processorpath}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/> + <copy todir="${build.test.classes.dir}"> + <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> + </copy> + </target> + <target name="-post-compile-test-single"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/> + <!-- + ======================= + JUNIT EXECUTION SECTION + ======================= + --> + <target depends="init" if="have.tests" name="-pre-test-run"> + <mkdir dir="${build.test.results.dir}"/> + </target> + <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run"> + <j2seproject3:junit testincludes="**/*Test.java"/> + </target> + <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run"> + <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> + </target> + <target depends="init" if="have.tests" name="test-report"/> + <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/> + <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/> + <target depends="init" if="have.tests" name="-pre-test-run-single"> + <mkdir dir="${build.test.results.dir}"/> + </target> + <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single"> + <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail> + <j2seproject3:junit excludes="" includes="${test.includes}"/> + </target> + <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single"> + <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> + </target> + <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/> + <!-- + ======================= + JUNIT DEBUGGING SECTION + ======================= + --> + <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test"> + <fail unless="test.class">Must select one file in the IDE or set test.class</fail> + <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/> + <delete file="${test.report.file}"/> + <mkdir dir="${build.test.results.dir}"/> + <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}"> + <customize> + <syspropertyset> + <propertyref prefix="test-sys-prop."/> + <mapper from="test-sys-prop.*" to="*" type="glob"/> + </syspropertyset> + <arg value="${test.class}"/> + <arg value="showoutput=true"/> + <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/> + <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/> + </customize> + </j2seproject3:debug> + </target> + <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test"> + <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/> + </target> + <target depends="init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/> + <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test"> + <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/> + </target> + <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/> + <!-- + ========================= + APPLET EXECUTION SECTION + ========================= + --> + <target depends="init,compile-single" name="run-applet"> + <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> + <j2seproject1:java classname="sun.applet.AppletViewer"> + <customize> + <arg value="${applet.url}"/> + </customize> + </j2seproject1:java> + </target> + <!-- + ========================= + APPLET DEBUGGING SECTION + ========================= + --> + <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet"> + <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> + <j2seproject3:debug classname="sun.applet.AppletViewer"> + <customize> + <arg value="${applet.url}"/> + </customize> + </j2seproject3:debug> + </target> + <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/> + <!-- + =============== + CLEANUP SECTION + =============== + --> + <target name="-deps-clean-init" unless="built-clean.properties"> + <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/> + <delete file="${built-clean.properties}" quiet="true"/> + </target> + <target if="already.built.clean.${basedir}" name="-warn-already-built-clean"> + <echo level="warn" message="Cycle detected: oldgears was already built"/> + </target> + <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps"> + <mkdir dir="${build.dir}"/> + <touch file="${built-clean.properties}" verbose="false"/> + <property file="${built-clean.properties}" prefix="already.built.clean."/> + <antcall target="-warn-already-built-clean"/> + <propertyfile file="${built-clean.properties}"> + <entry key="${basedir}" value=""/> + </propertyfile> + </target> + <target depends="init" name="-do-clean"> + <delete dir="${build.dir}"/> + <delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/> + </target> + <target name="-post-clean"> + <!-- Empty placeholder for easier customization. --> + <!-- You can override this target in the ../build.xml file. --> + </target> + <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/> + <target name="-check-call-dep"> + <property file="${call.built.properties}" prefix="already.built."/> + <condition property="should.call.dep"> + <not> + <isset property="already.built.${call.subproject}"/> + </not> + </condition> + </target> + <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep"> + <ant antfile="${call.script}" inheritall="false" target="${call.target}"> + <propertyset> + <propertyref prefix="transfer."/> + <mapper from="transfer.*" to="*" type="glob"/> + </propertyset> + </ant> + </target> +</project> |