summaryrefslogtreecommitdiffstats
path: root/make
Commit message (Collapse)AuthorAgeFilesLines
* Bug 888 / Bug 891- Enhance GLCapabilities-Query: Add raw perf. test case ↵Sven Gothel2013-11-052-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'choose' only and 'full' offscreen-drawable w/ context test01ChooseOnly exposes X11/GLX perf. enhancement of 613e33ee8ffc1f2b9c5db1e1b5bb5253a159ed6d: PRE CHANGE: ++++ UITestCase.setUp: com.jogamp.opengl.test.junit.jogl.perf.TestPerf001RawInit00NEWT - test01ChooseOnly INIT START #0 Run: 0, count 50/50 raw: choose 503/t 10.06/1 INIT END #0 INIT START #1 Run: 1, count 50/50 raw: choose 384/t 7.68/1 INIT END #1 INIT START #2 Run: 2, count 50/50 raw: choose 344/t 6.88/1 INIT END #2 POST CHANGE: ++++ UITestCase.setUp: com.jogamp.opengl.test.junit.jogl.perf.TestPerf001RawInit00NEWT - test01ChooseOnly INIT START #0 Run: 0, count 50/50 raw: choose 49/t 0.98/1 INIT END #0 INIT START #1 Run: 1, count 50/50 raw: choose 43/t 0.86/1 INIT END #1 INIT START #2 Run: 2, count 50/50 raw: choose 38/t 0.76/1 INIT END #2
* Bug 888 / Bug 891- Enhance GLCapabilities-Query: Add perf. test caseSven Gothel2013-11-052-3/+9
| | | | | | | | | Even though the test case itself cannot show the proper initialization time, it can be used w/ an attached profiler i.e. Test w/ 50 X11GLXGraphicsConfigurationFactory.chooseGraphicsConfigurationFBConfig() invocations: - pre change: 1.708 ms - post change: 650 ms (613e33ee8ffc1f2b9c5db1e1b5bb5253a159ed6d)
* Bug 888 / Bug 891 - Enhance GLCapabilities-Query: Apply changes of commit ↵Sven Gothel2013-11-057-31/+84
| | | | | | | 613e33ee8ffc1f2b9c5db1e1b5bb5253a159ed6d to EGL and WGL. Note: WGL config query is already performed as a bulk operation. Note: OSX does not perform such queries.
* Bug 888 - Validate CPU Runtime Performance: ↵Sven Gothel2013-11-043-0/+62
| | | | | | | | | | | | | | | | | | | | X11GLXGraphicsConfiguration.GLXFBConfig2GLCapabilities(..) X11GLXGraphicsConfiguration.GLXFBConfig2GLCapabilities(..) ran over all FB configs and for each it grabbed native config values separately. Fetching them in bulk mode saves around 7% of this function's cost. Also reuse XRenderPictFormat instance for 'XRenderDirectFormat XRenderFindVisualFormat(..)' call, saving a few NIO creation cycles w/ StructAccessor. Biggest savior is X11GLXGraphicsConfigurationFactory.chooseGraphicsConfigurationFBConfig()'s fast path w/o chooser and usable 1st FBConfig. Here we only issue 'GLXFBConfig2GLCapabilities(..)' on the first valid entry. Test w/ 50 X11GLXGraphicsConfigurationFactory.chooseGraphicsConfigurationFBConfig() invocations: - pre change: 1.708 ms - post change: 650 ms Time is no spent almost solely on native glXChooseFBConfig (546ms).
* GLContextImpl: Move sharedContextHandle check to makeCurrentWithinLock(..) ↵Sven Gothel2013-11-021-3/+4
| | | | and let it fail there instead of within impl. class, only pass the handle - simplifies and removes redundancy.
* Bug 885 - GLMediaPlayer: Allow single threaded mode - Especially where ↵Sven Gothel2013-11-012-4/+5
| | | | | | | | | | | | multiple media textures (Android) or shared GL context are not usable. - GLMediaPlayer: - TEXTURE_COUNT_MIN is the new minimum: '1' - i.e. no multithreading, single threaded player - TEXTURE_COUNT_DEFAULT is '4' - multithreaded - GLMediaPlayerImpl: - Add Single threaded mode, but perform initStreamImpl(..) off-thread. -
* Bug 852: Add unit test TestCPUSourcingAPINEWT validating CPU sourcing, i.e. ↵Sven Gothel2013-11-011-2/+3
| | | | expecting exception w/ core profile!
* Clarify Bug 692: Unbinding a VAO does _not_ imply unbinding of set VBOs ↵Sven Gothel2013-11-013-6/+7
| | | | | | | | | | | | | | | | | | | | | (spec doesn't mention it, and it does not show results w/ CPU sourced rendering) ; Clean up GLBuffer*Tracker + * Note that VAO initialization does unbind the VBO .. since otherwise they are still bound + * and the CPU_SRC test will fail!<br/> + * The OpenGL spec does not mention that unbinding a VAO will also unbind the bound VBOs + * during their setup.<br/> + * Local tests here on NV and AMD proprietary driver resulted in <i>no ourput image</i> + * when not unbinding said VBOs before the CPU_SRC tests.<br/> + * Hence Bug 692 Comment 5 is invalid, i.e. <https://jogamp.org/bugzilla/show_bug.cgi?id=692#c5>, + * and we should throw an exception to give users a hint! Leaving uncommented code in GLBufferStateTracker .. +++ - Clean up GLBuffer*Tracker - Use final - Use static final keyNotFound value.
* Bug 881 - Add 'Application-Name' in Jar's manifest to avoid Java6 NPEs ..Sven Gothel2013-11-016-0/+6
|
* Bug 882 - Crash on OSX when closing NEWT window - Fix: Release NewtMacWindow ↵Sven Gothel2013-11-011-1/+3
| | | | | | | | | | manually in close0() Release NewtMacWindow manually in close0() - Mark [NewtMacWindow setReleasedWhenClosed: NO] in init0(..) - Release NewtMacWindow manually in close0(..) Check pointer args in close0(..)
* GLDrawableFactory: createDummy*(..) Pass GLCapabilitiesImmutable + ↵Sven Gothel2013-10-311-2/+2
| | | | GLCapabilitiesChooser instead of GLProfile, allowing using same or similar caps - important for sharing ctx
* TestBinary16NOUI: Remove hardship from test node - Disable 'verbose' avoids ↵Sven Gothel2013-10-311-2/+3
| | | | 'out of memory' and saves most of the time; Also run test exclusively.
* Bug 754 - Remove Ubuntu fonts from jogl-all.jar, provide it separately to ↵Sven Gothel2013-10-313-3/+10
| | | | | | | | | | | | | | | reduce footprint for the masses. Remove the ubuntu fonts from atomic/jogl-util-graph.jar and hence all derivated 'all' JAR files. The Android jar files still contain the fonts as assets! atomic/jogl-util-graph-fonts-p0.jar contains the fonts and is either referenced by: - UbuntuFontLoader: Using class based Jar URI derivation using TempJarCache to [down]load and extract the jar file (similar to native lib-loading). - Explicitly via traditional classpath, see jnlp-files/jogl-applet-runner-newt-GraphTextDemo01b-napplet.html The pack200 jogl-all.jar file is now below 1MB
* Test Rename: Add Bug 729 / Bug 849 to Bug 816 Unit Test Names - Allowing a ↵Sven Gothel2013-10-311-4/+7
| | | | better unit test lookup
* Add GLES1Impl 'finalizeInit()' to avoid a 'catched exception roundtrip'Sven Gothel2013-10-301-0/+3
|
* Bug 776 GLContext Sharing: GLSharedContextSetter API Doc: Add 'glFinish()' ↵Sven Gothel2013-10-301-2/+2
| | | | to lifecycle considerations ; GearsES2: Add glFinish() after init().
* Bug 776 GLContext Sharing: GLSharedContextSetter API Doc: No 'Driver ↵Sven Gothel2013-10-301-3/+5
| | | | | | | | | | | | | | stability constraints' ; Fixing Test cases: Enable all, GearsObject*: Check VBO - GLSharedContextSetter API Doc: No 'Driver stability constraints' - No driver issues .. - Use 'Lifecycle Considerations' to describe usage issues .. - Fixing Test cases: Enable all, GearsObject*: Check VBO - GearsObject* needs to check whether VBO is 'still alive' if sharing is enabled. - Enable all unit tests.
* Bug 776 GLContext Sharing: Add GLSharedContextSetter to SWT GLCanvasSven Gothel2013-10-283-5/+5
|
* Bug 776 GLContext Sharing: Add note about driver stability (destruction ↵Sven Gothel2013-10-284-19/+78
| | | | | | | | | | | | | | | | | | | | | order) ; Fix unit tests (Shared Gears, wait for created context and destruction order) - Add note about driver stability (destruction order) - See GLSharedContextSetter: Don't destroy master context before slaves! - Fix spec-overview.html#SHARED links, add link to GLSharedContextSetter in SHARED subsection. - Fix unit tests (Shared Gears, wait for created context and destruction order) - The GearsObject sharing was completly bogus! It simply used the _same_ GLArrayDataServer instance for sharing, but it should use a _copy_ of the shared GLArrayDataServer while only preserving the VBO object! Fixed, while adding required methods to GLArrayDataServer. - Waiting for the created GLContext of a GLAutoDrawable required us to pass the latter _and_ check whether it's GLContext exists and is natively created. - Accomodated the destruction order - see above!
* Bug 776 GLContext Sharing: Add GLSharedContextSetter to GLJPanelSven Gothel2013-10-271-1/+2
|
* Bug 776 GLContext Sharing: Refine API for relaxed and lazy GLContext sharing ↵Sven Gothel2013-10-271-12/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ; Fix GLContext memory contract (volatile) (Unit test remarks see below) - Add shared GLContext queries - Refined GLContextShareSet: - Use IdentityHashMap since GLContext's can only be identical w/ same reference (footprint, performance) - Add API doc for clarification - Add methods: - ArrayList<GLContext> getCreatedShares(final GLContext context) - ArrayList<GLContext> getDestroyedShares(final GLContext context) - Use 'final' where possible - Add GLContext methods: - boolean isShared() - List<GLContext> getCreatedShares() - List<GLContext> getDestroyedShares() - Add GLSharedContextSetter interface defining setting a shared GLContext directly (GLContext) or via a GLAutoDrawable: - setSharedContext(GLContext) - setSharedAutoDrawable(GLAutoDrawable) Both cause initialization/creation of GLAutoDrawable's drawable/context to be postponed, if the shared GLContext is not yet created natively or the shared GLAutoDrawable's GLContext does not yet exist. Most of impl. resides in GLDrawableHelper Implemented in: - GLAutoDrawableBase, GLOffscreenAutoDrawable - GLWindow - AWT GLCanvas TODO: - GLJPanel - SWT GLCanvas - GLDrawableFactory: - Add 'GLOffscreenAutoDrawable createOffscreenAutoDrawable(..)' variant w/o passing the optional shared GLContext _and_ specifying lazy GLContext creation. This allows to benefit from GLSharedContextSetter contract. Lazy GLContext creation is performed at 2st display() call at the latest. All JOGL code and unit tests use this new method now. - Mark 'createOffscreenAutoDrawable(..)' w/ shared GLContext argument and immediate GLContext creation deprecated - shall be removed in 2.2.0 - Make reference to GLContext and it's native handle volatile Since we rely on the query 'GLContext.isCreated()' to properly allow GLAutoDrawable's to query whether a shared GLContext is natively created (already), the handle must be volatile since such query and the actual creation may operate on different threads. +++++ - Add/Refine shared GLContext unit tests demonstrating diff. sharing methods. All variants of using shared GLContext: com.jogamp.opengl.test.junit.jogl.acore.TestSharedContextVBO* Most convenient way to share via setSharedAutoDrawable(GLAutoDrawable): com.jogamp.opengl.test.junit.jogl.acore.TestSharedContextVBOES2[NEWT|AWT]3 AWT use w/ JTabbedPane using setSharedAutoDrawable(GLAutoDrawable): com.jogamp.opengl.test.junit.jogl.acore.TestSharedContextWithJTabbedPaneAWT
* spec-overview.html: Shared OpenGL context must be supported .. (GL spec)Sven Gothel2013-10-271-11/+2
|
* GLProfile: Fix native profile mapping, i.e. use actual mapped profile-impl ↵Sven Gothel2013-10-251-2/+2
| | | | | | | | | | | | | | | | as detected and mapped by GLContext ; Enhance glAvailabilityToString(..) We shall not map profile == profile-impl, i.e. GL3 -> GL3, but use GLContext.getAvailableGLProfileName(device, reqMajor, reqProfileBits). The latter reflects the actual mapped context as detected. glAvailabilityToString(..) - Partition result in [Natives, Common and Mappings] - Mappings dumps mapped keys to profiles, while excluding default. Default is added at last. - Add count.
* Bug 867 OSX [Common Code]: Trigger GLRendererQuirks.GL4NeedsGL3Request and ↵Sven Gothel2013-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | make it sticky; Only alias profiles if HW-Accelerated! Only alias profiles if HW-Accelerated! GLContextImpl.mapGLVersions(..) shall not map a higher profile to a lower if it is a software renderer. +++ GLContextImpl.mapGLVersions(..) attempts to trigger GLRendererQuirks.GL4NeedsGL3Request if OSX 10.9 by creating a GL3 core context first. +++ GLContextImpl.setGLFunctionAvailability(): - On OSX 10.9: Detect GLRendererQuirks.GL4NeedsGL3Request and make it sticky (per device) while 'withinGLVersionsMapping' - Merge sticky quirks w/ local quirks +++ TestGearsES2NEWT: Add cmdline '-gl2' to force GL2 profile.
* Bug 867 - OSX: Allow core >=4 if isMavericksOrLater; Use ↵Sven Gothel2013-10-241-1/+2
| | | | [kCGLOGLPVersion_GL4_Core, kCGLOGLPVersion_GL3_Core] for major==4 depending on sticky GLRendererQuirks.GL4NeedsGL3Request
* Bug 871 - Add optional xcode.clang support for all modules (Extends Bug 837 ↵Sven Gothel2013-10-245-5/+5
| | | | | | w/ xcode's xcrun) - Remove abs. include path. #include </usr/include/machine/types.h> -> #include <machine/types.h>
* PinchToZoomGesture: Add ctor arg 'allowMorePointer', should be false to be ↵v2.1.1Sven Gothel2013-10-192-5/+5
| | | | more stable (i.e. only 2 pointer pressed)
* Fix Bug 862: Fix GL Version Validation / NVidia GTX550 driver 331.13 - 64bit ↵Sven Gothel2013-10-193-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux - No compatibility GLProfile (GL2, >= GL3bc) Fix GL Version Validation: We shall not rely on our known good versions when validating a queried GL context version, but allow some 'room' for a higher version post JOGL release while still cutting off 'odd versions'. While GL version detection, we always iterate from the highest known version down to the lowest. Hence 'GLContext.isValidGLVersion(..)' is satisfied by validating the lowest version number but allowing a higher than known one. Now we would return 'invalid' for a version >= 6. It is enough to clip to the maximum known version when iterating, allowing the highest unknown version to be available. GLContext.isValidGLVersion(..): Returns true, if the major.minor is not inferior to the lowest valid version and does not exceed the highest known major number by more than one. The minor version number is ignored by the upper limit validation and the major version number may exceed by one. The upper limit check is relaxed since we don't want to cut-off unforseen new GL version since the release of JOGL. Hence it is important to iterate through GL version from the upper limit and 'decrementGLVersion(..)' until invalid. Add GL Version 4.4 to valid known versions. Remove ES3 desktop detection, which is impossible Regression of commit 3a0d7703da32e9a5ddf08a334f18588a78038d88 (ES3 support)
* Bump 7u45Sven Gothel2013-10-189-19/+21
|
* MouseEvent: Clarify button-number and pointer-ID relation incl. case 'no ↵Sven Gothel2013-10-181-2/+2
| | | | | | | | | | button/pointer', i.e. button == 0, pointer-ID == -1 doPointerEvent: - allow id==-1 -> button==0 for no button, i.e. mouse move doMouseEvent: - keep button 0 value, i.e. map to pointer-ID -1
* AWTPrintLifecycle.setupPrint(..): Fix regression of commit ↵Sven Gothel2013-10-181-2/+2
| | | | | | | | | | | | a05b87a369441d9ef38f97929f866b3d4ced0e57: NULL printGLAD of GLCanvas and NewtCanvasAWT We have to pre-init printGLAD w/ current GLAD (similiar w/ GLJPanel). Also properly define reqNewGLAD: reqNewGLAD = !caps.getSampleBuffers() && ( reqNewGLADOnscrn || reqNewGLADSamples || reqNewGLADSize ); where '!caps.getSampleBuffers() && ( .. )' is due to Bug 830, swapGLContextAndAllGLEventListener and onscreen MSAA w/ NV/GLX does not work.
* Bug 800: Windows 7 Touch Event Support for NEWT: Fix Focus and ↵Sven Gothel2013-10-172-4/+4
| | | | | | | | | | | | | LBUTTON[DOWN|UP] issues - w/ TOUCH, Win8 may steal focus (KILLFOCUS), quickly grab FOCUS again when on TOUCH operation - track 'touchDownLastUp', and don't act on LBUTTON[UP|DOWN] and MOUSEMOVE if just lifted last finger - don't use GetMessageExtraInfo() to distinguish MOUSE/TOUCH, simply use tracked touchDownCount - Also track mouseInside in TOUCH operation, i.e. true if _all_ fingers are inside, otherwise don't send TOUCH event
* NEWT PointerEvent: Unify event processing in new doPointerEvent(..) and ↵Sven Gothel2013-10-173-6/+6
| | | | | | | | | | | | | | | consumePointerEvent(..) - Unifies native mouse and Android's pointer event, ready for Win7 touch Unify event processing in new doPointerEvent(..), which is also invoked from doMouseEvent(..), and consumePointerEvent(). doPointerEvent(..): Validates and modifies event data and finally creates the event, where consumePointerEvent(..) calls gesture handlers and may synthesize events. Unifies native mouse and Android's pointer event, ready for Win7 touch. AndroidNewtEventFactory calls doPointerEvent(..) directly. Removed lots of duplicated pointer event handling code.
* AWTPrintLifecycle.setupPrint(..): Add optional tileWidth and tileHeight, ↵Sven Gothel2013-10-151-2/+2
| | | | allowing user to set custom tile size for performance evaluation/tweak
* Bug 861 - NEWT: Unify MouseEvent Processing incl. gesture processingSven Gothel2013-10-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We processed MouseEvents within NEWT as follows: sendMouseEvent/enqueueMouseEvent -> doMouseEvent, - called by native code to be delivered via consumeMouseEvent (now or later) - events are validated (move/drag, boundaries) - missing events are synthesized (click, enter, ..) as well as in several factories, i.e.: - AWTNewtEventFactory (1:1) - AndroidNewtEventFactory - synthesized events .. (click, ..) - android typed gesture detection (drag -> 1 finger scroll..) The latter enqueues events do Window/Display directly to be consumed by WindowImpl. Then users may have their own gesture detection etc. +++ This change unifies mouse/pointer event processing within NEWT within consumeEvent(..) which represents a common entry point. Gesture processing is now realized w/ a public API - GestureHandler - GestureHandler.GestureListener - GestureHandler.GesureEvent which supplies: - default impl. of optional gesture handlers (scroll, .. - default: enabled) - public API to add/remove gesture-handler and -listener +++ This allows our impl. to scale better in support of more multiple pointer devices (-> Win7/Win8, X11, ..).
* Bug 365: Add unit test, which run's through most of the ScaleInternal ↵Michael Esemplare2013-10-131-1/+2
| | | | functions for a single column image.
* Bug 860 - AWT Printing (AWTTilePainter): Shall use the enclosing integer ↵Sven Gothel2013-10-121-2/+2
| | | | | | | | | | | | | | | | | rectangle of the scaled double precision clipping rect AWTTilePainter simply rounds the scaled double precision clipping rectangle to receive the integer rectangle. This leads to uncovered drawing areas, since the integer rectangle position could be greater - and the size could be smaller than the double precision source. To get the enclosing rectangle, we need to use iPos = floor(position) iSize = ceil(position+size) - floor(position) .. turns our that the double precision 'Rectangle Rectangle2D.getBounds()' already performs this math.
* Bug 859: Let TileRenderer detect zero columns and rows in eot() where ↵Sven Gothel2013-10-121-2/+2
| | | | beginTile() throws an EOT IllegalStateException to avoid division by zero
* Android uses-sdk: Add android:targetSdkVersion="14" (to show up for tablets)Sven Gothel2013-10-112-2/+2
|
* Bug 852: Validate CPU sourced data API is allowed, throw exception if not. ↵v2.1.0Sven Gothel2013-10-103-2/+29
| | | | GLContext: isCPUSourcedAvail() -> isCPUDataSourcingAvail()
* Bug 852: Remove CPU sourced data API entry where not allowed (ES3 and GL ↵Sven Gothel2013-10-1022-16/+184
| | | | | | | | | | | | | | | | | | | | | | | core >= 3.0) ; GL2 cfg: Ignore GL2ES3 symbols (super) Remove CPU sourced data API entries via new config 'BufferObjectOnly <name>', listed in 'gl-common-gpubufferonly.cfg' and included in ES3 and all GL core >= 3 interfaces. If BufferObjectOnly is defined for a function, only the 'long offset' variant is being emitted. Due to limitations of GlueGen's 'ExtendedInterfaceSymbolsIgnore A.java', which only identifies the function name and not the signature - all CPU sourced variants are manually added to the compatibility and ES2 GL profiles via '*-common-cpubufferJavaCode.java' files. GLContext: Added 'isCPUSourcedAvail()' to determine whether context allows CPU sourced data, i.e. for GL2ES1 and GLES2 ctx. GLContext/GLProfile/GL: isGLES2() now returns false if having a ES3 context due to 'CPU sourced' incompatibility! +++ GL2 cfg: Added ignore GL2ES3 symbols of it's superclass, removing duplicated symbols.
* NEWT Reparent/Fullscreen: Add 'waitForPosition(..)' when reparenting or back ↵Sven Gothel2013-10-094-24/+4
| | | | from fullscreen; JOGLNewtAppletBase: Reparent to pos 32/32, trying to avoid browser window focus/top stealing on X11.
* Bug816 OSX CALayer: Issue w/ JSplitPane within Apple (Firefox, Safari - not ↵Sven Gothel2013-10-091-3/+3
| | | | | | | appletviewer) when move horizontal slider (vertical: ok) Moving horizontal slider if run as applet (Firefox, Safari - not appletviewer) doesn't move the GLCanvas even though it is resized.
* NEWT Reparent/Fullscreen: Fixes X11 unsuccessful return to parent window; ↵Sven Gothel2013-10-092-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add reparentWindow(..) top-level position arguments; Misc - Fixes X11 unsuccessful return to parent window On X11 when returning to parent window (-> CHILD), we have to set the window invisible and wait for the result. Otherwise it sometimes happens that the WM's reparent operation fails, i.e. the window won't become a child of desired parent and is positioned randomly. - Add reparentWindow(..) top-level position arguments .. allows bringing the child-window to top-level w/ a desired position. Otherwise the window would be positioned elsewhere as a top-level as the plain reparenting operation. X11 needs to set position and size _after_ making the window visible, otherwise WM may ignore the XConfigureWindow request. - Reparent recreate shall always store the desired position and size On OSX/CALayer when recreation is being used, we need to store the pos/size for later creation. - Tests: Use 'NewtAWTReparentingKeyAdapter' where possible (reparent/fullscreen) instead of duplicating such code. NewtAWTReparentingKeyAdapter: Performs reparenting and fullscreen operations off-thread (i.e. not on AWT/NEW EDT) while decorating the action w/ revoking/restoring the ExclusiveContextThread (ECT). Manually tested 'TestGearsES2NewtCanvasAWT' reparenting and fullscreen on X11, Windows and OSX/CALayer w/ JDK 7u40 successful.
* NEWT/Fullscreen (Bug 836): Exit re-parenting fullscreen w/ ↵Sven Gothel2013-10-071-3/+3
| | | | | | | | | | | | | | | [invisible-exit-visible] (-> like reparent); Always force focus; X11: Always use ALWAYSONTOP. - Remove unused 'fullscreenUseSpanningMode' state - Exit re-parenting fullscreen w/ [invisible-exit-visible] (-> like reparent) solves X11 issue, where the NEWT window doesn't 'return to it's parent'. Probably also fixes Bug 836! - Always force focus when enter and exit FS - X11: Always use ALWAYSONTOP No reason to behave different (spanning and normal-fs)
* Bug 729, Bug 849: Honor JAWTWindow's [parent] visibility stateSven Gothel2013-10-061-1/+3
| | | | | | | | | | | | JAWTWindow snoops HierarchyEvents for SHOWING_CHANGED to track local component's visibility state as well as it's global visibility state. The later is determined by it's parent's visibility change. If 'removeNotify()' is called, component's visibility is reset to it's local visibility state. Fixes OSX CALayer component's visibility if parent's visibility changes (Bug 729). Fixes continuous GL rendering if parent is invisible (Bug 849).
* Bug 789: glDrawArraysIndirect and glDrawElementsIndirect are using ↵Sven Gothel2013-10-062-0/+22
| | | | GL_DRAW_INDIRECT_BUFFER, add VBO variant and range-check
* Bug 729: OSX CALayer invisible needs to have opacity 0 to not show hidden ↵Sven Gothel2013-10-061-2/+2
| | | | | | | | component. Completes commit 3b02a219b1b9e446e87df1beb7da4266f74824fa See unit test: TestBug816OSXCALayerPos03AWT
* Bug816 OSX CALayer: getLocationOnScreenNonBlocking(..) stop traversing at ↵Sven Gothel2013-10-051-1/+3
| | | | | | | | | | top-level heavyweight Window, fixes [J]Dialog use case. Top-level heavyweight Window's position is it's position on screen, hence stop traversing. Thx to Emmanuel Puybaret for pointing this out. Adding Dialog and JDialog unit tests as inspired by Emmanuel Puybaret.
* test scripts (test Bug 729 w/ TestAWTCardLayoutAnimatorStartStopBug532)Sven Gothel2013-10-051-2/+2
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 21:53:04 +0000