summaryrefslogtreecommitdiffstats
path: root/src/jogl/classes/javax/media
Commit message (Collapse)AuthorAgeFilesLines
* Fix Bug 862: Fix GL Version Validation / NVidia GTX550 driver 331.13 - 64bit ↵Sven Gothel2013-10-191-31/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux - No compatibility GLProfile (GL2, >= GL3bc) Fix GL Version Validation: We shall not rely on our known good versions when validating a queried GL context version, but allow some 'room' for a higher version post JOGL release while still cutting off 'odd versions'. While GL version detection, we always iterate from the highest known version down to the lowest. Hence 'GLContext.isValidGLVersion(..)' is satisfied by validating the lowest version number but allowing a higher than known one. Now we would return 'invalid' for a version >= 6. It is enough to clip to the maximum known version when iterating, allowing the highest unknown version to be available. GLContext.isValidGLVersion(..): Returns true, if the major.minor is not inferior to the lowest valid version and does not exceed the highest known major number by more than one. The minor version number is ignored by the upper limit validation and the major version number may exceed by one. The upper limit check is relaxed since we don't want to cut-off unforseen new GL version since the release of JOGL. Hence it is important to iterate through GL version from the upper limit and 'decrementGLVersion(..)' until invalid. Add GL Version 4.4 to valid known versions. Remove ES3 desktop detection, which is impossible Regression of commit 3a0d7703da32e9a5ddf08a334f18588a78038d88 (ES3 support)
* jogl: add missing @Override annotationsHarvey Harrison2013-10-177-2/+29
| | | | Signed-off-by: Harvey Harrison <[email protected]>
* jogl: remove all trailing whitespaceHarvey Harrison2013-10-1741-943/+943
| | | | Signed-off-by: Harvey Harrison <[email protected]>
* AWTPrintLifecycle.setupPrint(..): Fix regression of commit ↵Sven Gothel2013-10-181-6/+7
| | | | | | | | | | | | a05b87a369441d9ef38f97929f866b3d4ced0e57: NULL printGLAD of GLCanvas and NewtCanvasAWT We have to pre-init printGLAD w/ current GLAD (similiar w/ GLJPanel). Also properly define reqNewGLAD: reqNewGLAD = !caps.getSampleBuffers() && ( reqNewGLADOnscrn || reqNewGLADSamples || reqNewGLADSize ); where '!caps.getSampleBuffers() && ( .. )' is due to Bug 830, swapGLContextAndAllGLEventListener and onscreen MSAA w/ NV/GLX does not work.
* AWTPrintLifecycle.setupPrint(..): Add optional tileWidth and tileHeight, ↵Sven Gothel2013-10-152-19/+37
| | | | allowing user to set custom tile size for performance evaluation/tweak
* Bug 859: Let TileRenderer detect zero columns and rows in eot() where ↵Sven Gothel2013-10-122-23/+38
| | | | beginTile() throws an EOT IllegalStateException to avoid division by zero
* Bug 852: Validate CPU sourced data API is allowed, throw exception if not. ↵v2.1.0Sven Gothel2013-10-101-2/+2
| | | | GLContext: isCPUSourcedAvail() -> isCPUDataSourcingAvail()
* Bug 852: Remove CPU sourced data API entry where not allowed (ES3 and GL ↵Sven Gothel2013-10-102-4/+14
| | | | | | | | | | | | | | | | | | | | | | | core >= 3.0) ; GL2 cfg: Ignore GL2ES3 symbols (super) Remove CPU sourced data API entries via new config 'BufferObjectOnly <name>', listed in 'gl-common-gpubufferonly.cfg' and included in ES3 and all GL core >= 3 interfaces. If BufferObjectOnly is defined for a function, only the 'long offset' variant is being emitted. Due to limitations of GlueGen's 'ExtendedInterfaceSymbolsIgnore A.java', which only identifies the function name and not the signature - all CPU sourced variants are manually added to the compatibility and ES2 GL profiles via '*-common-cpubufferJavaCode.java' files. GLContext: Added 'isCPUSourcedAvail()' to determine whether context allows CPU sourced data, i.e. for GL2ES1 and GLES2 ctx. GLContext/GLProfile/GL: isGLES2() now returns false if having a ES3 context due to 'CPU sourced' incompatibility! +++ GL2 cfg: Added ignore GL2ES3 symbols of it's superclass, removing duplicated symbols.
* Bug 818: Enable new quirk GLSLNonCompliant on OSX < 10.7 w/ NV GPU; ↵Sven Gothel2013-10-031-1/+10
| | | | GLJPanel: Don't use GLSL flip if quirk GLSLNonCompliant is present.
* GLJPanel: Fix 7u40 access to property 'sun.java2d.opengl'. Property was ↵Sven Gothel2013-10-031-6/+1
| | | | trusted before ..
* Add notice about 'GL states' regarding GLSL vertical flip (Bug 842 and Bug 826).Sven Gothel2013-10-021-2/+13
|
* GLJPanel/AWTGLPixelBuffer: Reused BufferedImage didn't account for ↵Sven Gothel2013-10-021-9/+17
| | | | | | | | | | | | | | | | | | | | | row-stride (regression of b33bdf41cf53f37203643a8551bf5d94b42a8fab) SingleAWTGLPixelBufferProvider w/ allowing row-stride reuses the AWTGLPixelBuffer and it's BufferedImage even w/ different width. This leads to distortion if using the BufferedImage unhandled. GLJPanel also set GL_PACK_ROW_LENGTH to pixelBuffer.width, which leads to an 'out-of-bounds' exception if ReadPixels is used w/ panelwidth and panelHeight. ++ Introduce AWTGLPixelBuffer.getAlignedImage(width, height) which returns an aligned BufferedImage while reusing the DataBuffer. GLJPanel fetches a new alignedImage if required. This allows a more efficient single buffer usage as intended, w/o the need of copying data.
* GLJPanel/Printing: Perform backend.reshape immediatly after printing if ↵Sven Gothel2013-09-291-9/+15
| | | | | | | resized; Add unit test for resize while printing. Perform immediatly reshape at releasePrint on AWT-EDT: - sendReshape = handleReshape(); // reshapeSize -> panelSize, backend reshape w/ GL reshape
* GLJPanel: Remove forced DEBUG .. at handleReshape in releasePrint (added w/ ↵Sven Gothel2013-09-281-1/+1
| | | | commit fe284b515d984198fdbe702837809f181625a457)
* AWT Printing: releasePrint() issue reshape from AWT-EDT; GLJPanel: Issue ↵Sven Gothel2013-09-282-13/+31
| | | | 'handleReshape' if panelSize/awtSize mismatch, otherwise 'sendReshape' and exception if offscreen size doesn't match panelSize.
* Fix AWT Printing: Use delegated GLDrawable's size for tile-size instead of ↵Sven Gothel2013-09-282-7/+8
| | | | | | | | | AWT-GLAD's size, since the latter uses AWT's component size. .. the AWT component size could have been modified after setupPrinting(..). The AWT-GLAD getWidth() and getHeight() is implemented by AWT's component and hence may not reflect the actual GLDrawable size while printing.
* TileRenderer*: TileRendererNotify -> TileRendererListener w/ clarifying ↵Sven Gothel2013-09-272-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | functionality (reshapeTile(..), ..); Only process GLEventListener impl. TileRendererListener; attachToAutoDrawable -> attachAutoDrawable, etc. -TileRendererNotify -> TileRendererListener - Added methods: - void reshapeTile(TileRendererBase tr,int tileX, int tileY, int tileWidth, int tileHeight, int imageWidth, int imageHeight); - void startTileRendering(TileRendererBase tr); - void endTileRendering(TileRendererBase tr); allowing to clarify user code and API specification, i.e. TR only processes GLEventListener which impl. TileRendererListener. This also allows simplifying the API doc, while having a more descriptive reshape method focusing solely on tile rendering. Further more, the start/end TR methods allow certain GL related actions while the context is current before and after iterating through the tiles. This is even used for RandomTileRenderer (one tile only), to allow to reuse same TileRendererListener for diff TRs. - Fix language, attach and detach usage was vice versa. We do attach an GLAutoDrawable to a TR - attachToAutoDrawable -> attachAutoDrawable - detachFromAutoDrawable -> detachAutoDrawable - Adapted unit tests.
* Fix Bug 839: Clarify whether resetStates(..) shall clearStates() - Pass ↵Sven Gothel2013-09-211-3/+6
| | | | 'isInit' flag.
* Fix Bug 826: GLJPanel: Fully restore TextureState and ViewportSven Gothel2013-09-201-7/+46
| | | | | | | | | | | | In FBO mode save TextureState of current texture-unit, as well as for the fbo texture-unit if the latter is a different. In glslTextureRaster mode for verical flip (using FBO), set the viewport to drawable size if before flipping and restore afterward - if equired. TestGLJPanelTextureStateAWT fully tests use cases: - Keep texture bound w/ same or other texture-unit - Use 2 viewports within one drawable and keep it
* AWTTilePainter.setupGraphics2DAndClipBounds(): Use 'Shape getClip()'; Use ↵Sven Gothel2013-09-192-24/+36
| | | | | | | | | | | | | | | | double precicion clip bounds 'all the way'; Explicitly scale image and clip w/ current scaled transform. - Use 'Shape getClip()' Don't assume Rectangle2D, but use Shape's getBounds2D() - Use double precicion clip bounds 'all the way' Remove rounding error on clip bounds w/ start value, which was _not_ using doubles. - Explicitly scale image and clip w/ current scaled transform. Instead of abusing Graphics2D's clip shape to scale image size and clip-area, explicitly use transform both bounding boxes into transformed space, scale space and transform out (inversion). A possible NoninvertibleTransformException will be thrown while Graphics2D has not been modified.
* AWT Printing: Move init-test of setupPrint(..) to AWT-EDT Runnable ; ↵Sven Gothel2013-09-172-35/+43
| | | | GLJPanel: Attempt to initialize if not done yet (similar to GLCanvas)
* Fix AWT printing issues w/ overlapping and/or non-opaque contents ; Change ↵Sven Gothel2013-09-153-217/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AWTPrintLifecycle's lifecycle - AWTPrintLifecycle: - Should decorate: PrinterJob.print(..), instead of within Printable.print(..) { .. container.printAll(..); .. } This is due to AWT print implementation, i.e. AWT will issue Printable.print(..) multiple times for 'overlapping' or non-opaque elements! - Move from javax.media.opengl.awt -> com.jogamp.nativewindow.awt - Make _interface_ AWT agnostic, i.e. remove Graphics2D from 'setup(..)' - Add 'int numSamples' to 'setup(..)' to determine the number of samples - AWTTilePrinter: - Use double precision when scaling image-size and clip-rect, then round them to integer values. Otherwise AWT will use the bounding box for the clipping-rectangular. - Clip negative portion of clip-rect, this removes redundant overpaints, as well as increasing the tile count due to the increased clipping-size. - Clip the image-size in the tile-renderer according to the clip-rect. - DEBUG_TILES: Dump tiles to file - Use sub-image of final BuffereImage instead of adding another clipping region. This might increase performance if no clip-rect has been set. TODO: TestTiledPrintingGearsSwingAWT overlapping tests exposes a 'off by one' bug of the first layer's background! Note: The GL content seems to be correct though - maybe it's simply an AWT rounding error ..
* AWTTilePainter: Fix null clip-rect (consider scaling); Fix non GL-oriented ↵Sven Gothel2013-09-132-1/+2
| | | | drawable, skip vertical flip and use 1:1 y-coord.
* AWT Printing: AWTTilePainter needs to handle null clip!Sven Gothel2013-09-102-2/+2
|
* AWTPrintLifecycle: Add DEFAULT_PRINT_TILE_SIZE (512); Remove unused imports.Sven Gothel2013-09-083-12/+5
|
* Add AWTTilePainter.dumpHintsAndScale(..), removing more duplicated code from ↵Sven Gothel2013-09-082-22/+2
| | | | GLCanvas/GLJPanel
* Fix some JavaDoc and API doc (reference) bugs ..Sven Gothel2013-09-089-54/+65
|
* AWTPrintLifecycle: Add detailed API docSven Gothel2013-09-081-1/+62
|
* Test: Don't resize frame, tweek print-matrix; AWTPrintLifecycle: Add scale ↵Sven Gothel2013-09-083-72/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and convenient AWT container traversal context; GLCanvas/GLJPanel properly handle existing MSAA and req. AA; - Test: Don't resize frame, tweek print-matrix - Use scaleComp72 to scale the frame to fit on page, i.e. global print matrix - Use scaleGLMatXY = 72.0 / glDPI to locally scale on the GL drawable as being passed to AWTPrintLifecycle.setup(..) - Hence frame stays untouched/stable, no need for 'offscreen' print test, which is removed. - AWTPrintLifecycle: Add scale and convenient AWT container traversal context Use a simple decoration for all AWTPrintLifecycle impl. components within a container: final AWTPrintLifecycle.Context ctx = AWTPrintLifecycle.Context.setupPrint(frame, g2d, scaleGLMatXY, scaleGLMatXY); try { } finally { ctx.releasePrint(); } - GLCanvas/GLJPanel properly handle existing MSAA and req. AA; - GLCanvas: Workaround bug where onscreen MSAA cannot switch to offscreen FBO, i.e. stay 'onscreen' - GLJPanel: Use new offscreen FBO if MSAA is requested and not yet used. - GLJPanel.Offscreen.postGL(): always swapBufer(), was missing for !GLSL swapping Results GLCanvas / GLJPanel: - Good scaling - Stable behavior / visibility - High DPI mode works
* TiledPrintingAWTBase: Fix scaling - Fit frame to page, add MSAA ↵Sven Gothel2013-09-073-29/+51
| | | | | | | | | | | | | | RenderingHints test; setupPrint(Graphics2D): Query RenderingHints to use MSAA rendering - AWTPrintLifecycle.setupPrint(Graphics2D): Query RenderingHints to use MSAA rendering - Impl. in GLCanvas - TODO GLJPanel (would need a new offscreen buffer) - TiledPrintingAWTBase: - Fix scaling - Fit frame to page - add MSAA RenderingHints test - GLCanvas: Remove dumpStack() DEBUG output
* Complete commit 54dcdf1f53c9fc1f7124cf77bbf5aa952d42053a, exposing GL2ES3 in ↵Sven Gothel2013-09-072-2/+10
| | | | GLProfile (just a query, no new profile)
* AWT/GL Printing WIP: Abstract AWT tile painting code out to AWTTilePainter, ↵Sven Gothel2013-09-072-301/+83
| | | | reused w/ GLCanvas and GLJPanel
* GLCanvas Printing WIP: Add GLJPanel; GLCanvas TILE_SIZE 512; ↵Sven Gothel2013-09-062-75/+339
| | | | print(Graphics): Don't force on AWT-EDT -> Deadlock; releasePrint(): perform reshape/display!
* Add AWTPrintLifecycle interface describing impl. w/ ↵Sven Gothel2013-09-062-1/+52
| | | | setupPrint()/releasePrint(), modularize unit test TestTiledPrintingGearsAWT
* GLCanvas Printing WIP: Perform all print* operations on AWT-EDT, clip before ↵Sven Gothel2013-09-061-147/+184
| | | | drawing image and show same; Test: Add offscreen print and add borders.
* GLCanvas Printing WIP: Swap to offscreen at setupPrint(); Use TileRenderer @ ↵Sven Gothel2013-09-061-107/+129
| | | | | | | | | | | | | | | | | | | | | | | | print(..); Test: Add auto-print w/o UI 72dpi and 300dpi NOTE: Tile raster is added at print plus lots of debug output - WIP! - Swap to offscreen at setupPrint() - Swap GLEventListener (GLEL) and GLContext to fixed size offscreen GLAutoDrawable (GLAD) - Destroy onscreen drawable/context - Setup TileRenderer w/ offscreen GLAD - @ releasePrint() restore onscreen .. This shall ensure we don't hog the GPU resources when resizing the AWT component (upscaling). - Use TileRenderer @ print(..) The clip-rect will be used as the TileRenderer's image-size and we perform a whole tile-rendering loop. This helps to limit resources, see above. - Test: Add auto-print w/o UI 72dpi and 300dpi
* GLCanvas Printing WIP - Add TestTiledPrintingGearsAWTSven Gothel2013-09-051-30/+36
|
* TileRendererBase: API-doc cleanup; Fix GLCanvas, WIP printing ..Sven Gothel2013-09-051-66/+122
|
* TileRenderer*: Enhance API Doc; Cleanup OO; Remove PMVMatrixCallback, use ↵Sven Gothel2013-09-051-0/+110
| | | | | | | | | | | | | GLEventListener reshape(..) or manual reshape after beginTile(..) method. GLEventListener reshape(..) method should be aware of TileRenderer usage and get the missing tile position and image size from it (-> see Gears example). TestRandomTiledRendering3GL2AWT demos AWT GLCanvas onscreen being used for random tile rendering to produce a PNG file. TestTiledRendering1GL2 is now GLAutoDrawable/GLEventListener agnostic, hence demos plain GLDrawable tile rendering usage.
* GLPixelBuffer*: Add componentCount==1 (ALPHA/RED), 'allowRowStride' ↵Sven Gothel2013-09-041-6/+7
| | | | | | | | | | | | | | | | | utilization AWTGLPixelBuffer* -> GLPixelBuffer* GLPixelBufferProvider: - Default*.getAttributes(): Add componentCount==1 (ALPHA/RED), validate values, throw exception if n/a or not supported - Add 'allowRowStride' (as for AWTGLPixelBufferProvider) - Add default for true and false GLPixelBuffer: - Add 'allowRowStride' (as for AWTGLPixelBuffer) - Fix requiresNewBuffer(..): - aquire minByteSize if passed one is <= 0 - validate minByteSize w/ currentByteSize according to allowRowStride. AWTGLPixelBuffer: 'allowRowStride' impl. moved to GLPixelBuffer.
* GL*, GLContext: Expose isGL2ES3() and getGL2ES3() for convenience.Sven Gothel2013-09-032-0/+21
|
* Fix Bug 810: Adding Julien Gouesse's fix while moved the new ↵Sven Gothel2013-09-021-6/+2
| | | | 'addNativeJarLibsJoglCfg(..)' to GlueGen, commit c0ead6fa10280f8076704726d59f482b183fd77e
* GLContext: Add missing 'isGLESProfile()' and fix 'isGLcore()', i.e. GL2ES2 ↵Sven Gothel2013-08-311-1/+2
| | | | -> GLES2 (in profile set)
* Fix Bug 815: GL*: Change glIs<Buffer>Enabled() -> glIs<Buffer>Bound() to ↵Sven Gothel2013-08-141-2/+2
| | | | | | | | | | | | | | | | reflect semanics - Also fix the exception message (enabled/disabled -> bound/unbound) Reason of change: Avoid confusion and point to the cause! API change: glIsVBOArrayEnabled() -> glIsVBOArrayBound() glIsVBOElementArrayEnabled() -> glIsVBOElementArrayBound() glIsPBOPackEnabled() -> glIsPBOPackBound() glIsPBOUnpackEnabled() -> glIsPBOUnpackBound() Exception message change: "must be enabled to call this method" -> "must be bound to call this method" "must be disabled to call this method" -> "must be unbound to call this method"
* GLDrawableFactory: Expose createDummyDrawable(..) / GLDrawableFactoryImpl: ↵Sven Gothel2013-08-101-1/+15
| | | | | | Make impl. methods final. createDummyDrawable(..) is useful for efficient shared context w/o actually rendering to this dummy drawable's framebuffer
* GLContext: Refine API doc (CONTEXT_NOT_CURRENT.. values) / Exception messageSven Gothel2013-08-101-3/+3
|
* Remedy for Bug 782: Issue Debug.initSingleton() or Debug.debug(..) before ↵Sven Gothel2013-07-173-8/+19
| | | | | | | | | | | | | | | | | | | | | | | | calling 'PropertyAccess.isPropertyDefined(propName, default)' through Debug class. Calling 'Debug.isPropertyDefined(propName, default)' may be 'optimized' to 'PropertyAccess.isPropertyDefined(propName, default)', which would skip the modules Debug's class initialization. Iff that happens, an AccessControlException may happen, due to requesting an insecure property, since modules own Debug class has not been added it's trusted prefixes from within it's init block yet. This seems to be a bug of the JVM .. to me, however .. the above description is the only able to explain the issue at hand. +++ Fix calls Debug class own static methods, either Debug.initSingleton() or Debug.debug(), before calling 'isPropertyDefined(propName, default)'. +++ Also mark Debug class static methods final! +++
* Fix OSX GL-core lack of pbuffer: GLDrawableFactory.canCreateGLPbuffer(..) ↵Sven Gothel2013-07-171-7/+11
| | | | | | add GLProfile argument, similar to canCreateFBO(..) In case a compatible non-core profile is requests, canCreateGLPbuffer(..) returns false on OSX.
* Fix GLContext.isGLES3CompatAvailable(..) API doc and reorder query (from ↵Sven Gothel2013-07-161-4/+4
| | | | commit 1a20ef3aa1dc9acedd7da0475ee19d4c40b18498)
* Redefine: isGLES3Compatible() and isGL4ES3(), i.e. allow GL4ES3 usage in ↵Sven Gothel2013-07-163-47/+97
| | | | | | | | | case proper ES3_compat is given. isGLES3Compatible() and isGL4ES3() of GLBase _and_ GLContext includes [ GL >= 4.3, GL >= 3.1 w/ GL_ARB_ES3_compatibility and GLES3 ]. Tested GL 'aliasing' w/ TestGLProfile01NEWT, i.e. isGL*() and getGL*().
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 03:42:13 +0000