aboutsummaryrefslogtreecommitdiffstats
path: root/src/nativewindow/classes/javax/media
Commit message (Collapse)AuthorAgeFilesLines
* Bug 973: NativeWindowFactory: Needs service provider interface (SPI) for TK ↵Sven Gothel2014-02-121-2/+2
| | | | specific implementations (Scaling)
* Bug 973: NativeWindowFactory: Needs service provider interface (SPI) for TK ↵Sven Gothel2014-02-121-4/+19
| | | | | | specific implementations (Scaling) Add FIXME note ..
* NativeWindowFactory.createWrappedWindow [WrappedWindow]: Using ↵Sven Gothel2014-01-311-3/+3
| | | | UpstreamSurfaceHookMutableSizePos to take position into account; WrappedWindow: invalidate and destroy - display device could be opened.
* Add NativeWindowFactory.getLocationOnScreen(NativeWindow nw) to retrieve the ↵Sven Gothel2014-01-311-0/+19
| | | | NativeWindow location on screen
* NativeWindowFactory: Add Support for creating a platform agnostic wrapped ↵Sven Gothel2014-01-301-0/+46
| | | | AbstractGraphicsDevice/NativeWindow
* Bug 948 - NVIDIA 331.38 (Linux X11) EGL impl. only supports _one_ EGL ↵Sven Gothel2014-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Display via eglGetDisplay(..) NVIDIA 331.38 (Linux X11) EGL impl. only supports _one_ EGL Display via eglGetDisplay. - Subsequent eglGetDisplay(..) calls fail. - Using the same 'global' egl-display does work though Remedy: Add 'GLRendererQuirks.SingletonEGLDisplayOnly' Detection of quirk is done as usual in GLContextImpl.setRendererQuirks(..), and EGLDrawableFactory passes the quirk, if detected, down to EGLDisplayUtil. The latter implements the singleton eglDisplay handle. EGLDisplayUtil: Cleaned up .. - EGLDisplayRef employs the reference handling incl. eglInitialize(..) and eglTerminate(), as well as the new singleton quirk. - Mark all internal methods 'private', to remove possible [untested] sideffects.
* PixelRectangle.GenericPixelRect: hashCode() impl. didn't set volatile ↵Sven Gothel2014-01-091-0/+1
| | | | hashCodeComputed := true (always re-computes hash code - duh!)
* Bug 935: NEWT PointerIcon: Utilize Toolkit Agnostic PixelFormat and ↵Sven Gothel2014-01-081-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conversion Utilities (Allowing 'arbitrary' PointerIcon data input) Commit fe28bc125429b38cdcd016746081f4a6d521c6fd added the notion of toolkit agnostic PixelFormat and conversion utilities, utilized and further tested by this patch. +++ - PointerIcon is a PixelRectangle and hence holds the decoded data. This allows on-the-fly conversion if required as well as recreation w/o PNG re-decoding. - Using array-backed PointerIcon data where possible, allowing better performance when converting PixelFormat etc. - NEWT Display adds 'createPointerIcon(final IOUtil.ClassResources pngResource...' method to support agnostic PointerIcon creation. - NEWT Display adds methods to allow users to avoid PixelFormat and Buffer NIO type forced conversion: - PixelFormat getNativePointerIconPixelFormat() - boolean getNativePointerIconForceDirectNIO() +++ PNGImage -> PNGPixelRect Deleted: com.jogamp.opengl.util.texture.spi.PNGImage Added: com.jogamp.opengl.util.PNGPixelRect (We hope nobody was using PNGImage directly since it was a service-plugin for TextureIO) PNGPixelRect is a PixelRectangle PNGPixelRect actually is implemented OpenGL agnostic, however - since our PNGJ support lives under package 'jogamp.opengl.util.pngj' it cannot be moved up (yet). PNGPixelRect now handles all PixelFormat for the target format and also added support for grayscale+alpha (2 channels). The latter is force-converted to RGB* - similar to paletted. Further more, PNGPixelRect allows simply passing an OutputStream to write the PNG data. Used by: TextureIO and NEWT +++ - OffscreenSurfaceLayer's setCursor(..) uses the agnostic PixelRectangle instead of a PNG resource. - AWTMisc uses the PixelRectangle to produce the AWT Cursor and converts it to the required format. Hence same pixels are used for NEWT and AWT pointer/cursor icon. - TestGearsES2Newt and NewtAWTReparentingKeyAdapter 'tests' iterate over 3 custom PointerIcon when pressed 'c'. - JOGLNewtAppletBase uses the new custom PointerIcon 'newt/data/crosshair-lumina-trans-32x32.png', which is included in NEWT (213 bytes only). -
* Bug 935: NEWT PointerIcon: Add Toolkit Agnostic PixelFormat and Conversion ↵Sven Gothel2014-01-083-0/+763
| | | | | | | | | | Utilities (Allowing 'arbitrary' PointerIcon data input) To allowing 'arbitrary' PointerIcon data input, i.e. via raw pixels we need to define an agnostic PixelFormat and required conversion utilities. The latter is not hw accelereated (toolkit agnostic), but this shall be expected and satisfying for small amount of 'pixels'.
* Bug 935: NEWT OSX PointerIcon/Pointer-Visibility: Impl. ↵Sven Gothel2014-01-041-0/+20
| | | | | | | | | | OffscreenLayerSurface (OSX CALayer) w/ JAWTWindow Path Add setCursor(..) and hideCursor() to OffscreenLayerSurface interface, impl. in JAWTWindow w/ AWT. This allows an OSX NEWT Window using CALayer (i.e. NewtCanvasAWT) to have setPointerIcon(..) and setPointerVisible(..) functionality!
* NativeWindow *GraphicsDevice: Align constructors to simplify call hierarchy ↵Sven Gothel2013-11-061-14/+4
| | | | for analysis.
* jogl: avoid creating a second String object, one is enoughHarvey Harrison2013-10-185-5/+5
| | | | | | | One String is already being built, passing it to new String() is just wasteful as the temp String can be returned just as easily. Signed-off-by: Harvey Harrison <[email protected]>
* jogl: add missing @Override annotationsHarvey Harrison2013-10-1716-0/+37
| | | | Signed-off-by: Harvey Harrison <[email protected]>
* jogl: remove all trailing whitespaceHarvey Harrison2013-10-1732-402/+402
| | | | Signed-off-by: Harvey Harrison <[email protected]>
* Add efficient set(..all..) to Dimension, Insets, Point and Rectangle of ↵Sven Gothel2013-10-164-19/+30
| | | | NativeWindow's util types.
* NativeWindow API Doc: Fix layout / Add version.Sven Gothel2013-07-171-55/+39
|
* Remedy for Bug 782: Issue Debug.initSingleton() or Debug.debug(..) before ↵Sven Gothel2013-07-171-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | calling 'PropertyAccess.isPropertyDefined(propName, default)' through Debug class. Calling 'Debug.isPropertyDefined(propName, default)' may be 'optimized' to 'PropertyAccess.isPropertyDefined(propName, default)', which would skip the modules Debug's class initialization. Iff that happens, an AccessControlException may happen, due to requesting an insecure property, since modules own Debug class has not been added it's trusted prefixes from within it's init block yet. This seems to be a bug of the JVM .. to me, however .. the above description is the only able to explain the issue at hand. +++ Fix calls Debug class own static methods, either Debug.initSingleton() or Debug.debug(), before calling 'isPropertyDefined(propName, default)'. +++ Also mark Debug class static methods final! +++
* StringBuffer -> StringBuilderSven Gothel2013-07-152-2/+2
|
* NEWT MonitorMode test cases: Add X11 XRandR commandline reset to ↵Sven Gothel2013-07-091-1/+4
| | | | | | | | UITestCase's AfterClass if available (X11). In case a MonitorMode test case fails, force XRandR reset '-s 0 -o normal' at end of test class if X11. Unit Test: TestScreenMode00cNEWT
* Add Comparable<?>: Point*, Dimension*, Rectangle*, SurfaceSize* and ↵Sven Gothel2013-06-307-5/+105
| | | | | | | | | | | MonitorMode* ; Sort List<MonitorMode> in descending order to be well determined. Add Comparable<?>: Point*, Dimension*, Rectangle*, SurfaceSize* and MonitorMode*: - Compare square values - See API doc for order of special semantics (flags, rotation, ..) Sort List<MonitorMode> in descending order to be well determined: - Removes order by native mode id, give user a reliable natural order.
* Fix Bug 761 (part 1/2): Move GLDrawableFactory.shutdownHook -> ↵Sven Gothel2013-06-231-23/+75
| | | | | | | | | | | | | | | | | | NativeWindowFactory.shutdownHook, the latter handles customShutdownHooks for NativeWindow, JOGL and NEWT. Unifying our shutdown mechanism is required to provide a controlled shutdown sequence. NativeWindowFactory is chosen to be the new central entry point, since it is the lowest denominator (common module). - Move GLDrawableFactory.shutdownHook -> NativeWindowFactory.shutdownHook Reverse the shutdown dependency for clarity and availability to all modules, i.e. NEWT may not know about JOGL. Remove the 'gamma' shutdown hook, instead simply call GLDrawableFactoryImpl.resetDisplayGamma() before destroy. NativeWindowFactory.shutdownHook handles customShutdownHooks for NativeWindow, JOGL and NEWT - Modules can register their shutdown runnable at head or tail of list. - Allows controlled shutdown across all modules.
* Bug 747: Allow usage of IdentityHashMap w/ keys: ↵Sven Gothel2013-06-092-4/+15
| | | | | | AbstractGraphicsDevice.getUniqueID() and GLContext.getDeviceVersionAvailableKey() .. both value classes unique, long lived and rare.
* Fix Bug 600 and Bug 721: Adding support for multiple monitors w/ NEWTSven Gothel2013-05-066-6/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Support for all monitor devices and their available modes - X11: Use RandR 1.3 if available - Retrieve information - Changing a monitor device's mode - Support for dedicated and spannig fullscreen - See <http://jogamp.org/files/screenshots/newt-mmonitor/html/> - TODO: - X11 RandR does _not_ relayout the virtual screen size and neither the CRT's viewport. We may need to relayout them if they were covering a seamless region to achieve same experience! - OSX: No machine to attach a secondary CRT -> TEST! - Tested Manually for Regressions - Linux ARMv6hf (Rasp-Pi/BCM, Panda/X11) - Android (Huawei, Kindle) - Tested Manually and junit: - X11/Linux - NV, ATI-Catalyst w/ 2 CRTs - VBox w/ 4 CRTs - Win/Windows - NV, w/ 2 CRTs - VBox w/ 4 CRTs - X11/OpenIndiana, NV, 1 CRT
* Fix Bug 722: Make GLEventListenerState 'transaction' safe Animator.pause[ ↵Sven Gothel2013-04-231-1/+39
| | | | | | | | | | | | | | | | | | | | | surface.lock[ modify ] ] GLEventListenerState: New model for GLEventListenerState's transaction safety: - Z Decorate-1: Animator.pause [ X ] Animator.resume - X Decorate-2: Surface.lock [ Y ] Surface.unlock - Instead of setting AbstractGraphicsDevice, just swap the handle and ownership. - Issuing setRealized(..) only if required, i.e. having an upstream-surface (EGL..) depending on used device - Utilizing setRealized(..) on the GLAD's delegated 'real' drawable, avoiding optional GLAD locking. - Cleanup and above changes shall render impl. easier to read. GLEventListenerState Unit Tests: - If swapping/moving from AWT -> NEWT, use a NEWT dedicated Display avoiding ATI driver XCB crash - read comment.
* *Capabilities: Cleanup string ctor; GLGraphicsConfigurationUtil: Clean ↵Sven Gothel2013-04-171-3/+8
| | | | getExclusiveWinAttributeBits(..); WGLGLCapabilities: Add PFD2String(..)
* OSX/CALayer: OSX/CALayer Threading Part3 - Run CALayer ops in a streaming ↵Sven Gothel2013-03-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | design on main-thread w/o [infinitive] blocking History: Part1 commit 896e8b021b39e9415040a57a1d540d7d24b02db1 (Run CALayer Ops on current thread to avoid blocking) Part2 commit 28c6472335b924080d638b33a28f8f4eedb459b1 (Run CALayer Ops on main-thread w/o blocking) Dependency: GlueGen commit 4becdfa125b07ff969d6540e1112735b53cd15eb (Fix RecursiveLockImpl* Timeout corner case) Part2 misses essential locking of the OpenGL context (and it's surface upfront) while creating the NSOpenGLLayer instance. The latter instantiates a OpenGL context shared w/ JOGL's, hence it cannot be locked. Encapsulating NSOpenGLLayer creation/attachment and it's detachment/release in sub-classes AttachNSOpenGLLayer and DetachNSOpenGLLayer, where instances will be streamed on main-thread. Both tasks are triggered at associateDrawable(boolean bound). The mentioned GL context locking requires disturbs the 'streaming' design considerably in AttachNSOpenGLLayer. It is solved by attempt to acquire the recursive lock of the surface and the context via 'tryLock(maxwait)' w/ screen-vSync-period/2. If the locks could not be acquired completly, the AttachNSOpenGLLayer instance will be re-queued to the main-thread for later execution. Before DetachNSOpenGLLayer is being streamed, it is validated whether AttachNSOpenGLLayer did run. A recursive situation does happen w/ resizing an offscreen pbuffer drawable! Hence extra care is being taken.
* OSX/CALayer: Simplify FixCALayerLayout()/layoutSurfaceLayer() call, no more ↵Sven Gothel2013-03-141-15/+0
| | | | | | | | | | | | need for explicit call - OffscreenLayerSurface.layoutSurfaceLayer() removed, no more required - JAWTWindow adds a ComponentListener, which issues FixCALayerLayout() at resized, moved and shown. - MyNSOpenGLLayer no more requires fix*Size() methods - MyNSOpenGLLayer::setDedicatedSize() need no explicit CATransaction, performed by caller.
* OSX/CALayer: Revise CALayer 'RunOnMainThread' utilization, avoiding deadlocksSven Gothel2013-03-141-4/+0
| | | | | | | | | | | | | | | | | | | | | | RunOnMainThread(waitUntilDone:=true,..) can deadlock the main-thread if called from AWT-EDT, since the main-thread may call back to AWT-EDT while injecting a new main-thread task. This patch revises all RunOnMainThread CALayer usage, resulting in only one required left: - OSXUtil.AddCASublayer() w/ waitUntilDone:=false Hence the CALayer code has no more potential to deadlock main-thread/AWT-EDT. OSXUtil.AddCASublayer() must be performed on main-thread, otherwise the CALayer attachment will fail - no visible rendering result. +++ Note: A good trigger to test this deadlock is to magnify/zoom the OSX desktop (click background + ctrl-mouse_wheel) before running some unit tests. TestGLCanvasAWTActionDeadlock01AWT and TestAddRemove02GLWindowNewtCanvasAWT also have the potential to trigger the mentioned deadlock.
* Fix NEWT/AWT WindowClosing Unit Tests ; Review/Cleanup NEWT WindowClosing ↵Sven Gothel2013-02-282-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mechanism Due to a NEWT WindowClosing event regression cause by NewtCanvasAWT changes a review of our WindowClosing event mechanism was required. Important cleanups are marked w/ '(*)' below. I would have preferred to change the 'WindowListener.windowDestroyNotify(WindowEvent)' method to pass a WindowCloseEvent object exposing more information like toolkit or programmatic destruction and passing whether a 'closing' or 'nop' action will be performed based on the WindowClosingMode. For now I postponed this idea .. since it would change the API again, but may reconsider it after merging the Android 'closing' patch. - InputEvent.consumedTag -> NEWTEvent.consumedTag - Window - (*) Promote setWindowDestroyNotifyAction(Runnable) to public, former WindowImpl.setHandleDestroyNotify(boolean). Using a Runnable action for WindowImpl.windowDestroyNotify(boolean) allows a setting defined alternative for destroy() and gets rid of [ab]using WindowListener.windowDestroyNotify(WindowEvent) for lifecycle actions. Used in: - GLWindow - GLAutoDrawableDelegate impl. - WindowImpl - Respect NEWTEvent.consumedTag for WindowEvents as well - (*) Impl. setHandleDestroyNotify(boolean) (see above) - (*) destroy() simply sends out pre- and post- destruction Window events, where windowDestroyNotify(boolean) sends out the pre-destruction event if NOP. - (*) windowDestroyNotify(boolean) is public now, allowing other impl. details to follow proper destruction using handleDestroyNotify Runnable (-> NewtCanvasAWT). - AWTWindowClosingProtocol: - addClosingListenerOneShot() -> addClosingListener() - calling addClosingListener() at addNotify() - calling removeClosingListener() at removeNotify() - AWTWindowClosingProtocol ctor taking NOP runnable, allowing to send WindowEvent.EVENT_WINDOW_DESTROY_NOTIFY at WindowClosingMode.DO_NOTHING_ON_CLOSE - add/remove listener on AWT-EDT - AWTWindowAdapter - Add 'removeWindowClosingFrom(..)', allowing to remove window closing event fwd. - Also fwd windowClosed in window closing fwd'ing. - NewtCanvasAWT - (*) Utilize AWTWindowClosingProtocol NOP runnable (see above) to fwd closing-NOP event to NEWT - (*) Unify remove/destroy code in destroyImpl(..) - !removeNotify -> destroy NEWT child programatic or as toolkit event - removeNotify || windowClosing -> destroy jawtWindow - (*) Remove AWTWindowAdapter/AWTParentWindowAdapter's windowClosingListener, since we utilize AWTWindowClosingProtocol - DisplayImpl - Adding 'final void dispatchMessage(final NEWTEvent event)' allowing to remove the NEWTEventTask wrapping for no reason in enqueueEvent(..) if on EDT and waiting.
* OSX/Java7/CALayer + JAWT: Partially Fix AWT/NEWT CALayer 'out of sight' bug, ↵Sven Gothel2013-02-201-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | where our CALayer is moved out of the visible area - same erroneous behavior for GLCanvas and NewtCanvasAWT - sized-frame: Set framesize and validate() it - sized-component: Set component preferred size and call frame.pack() - added workaround 'OffscreenLayerSurface.layoutSurfaceLayer()' to fix CALayer size, which snaps for: - OK initial size before setVisible: sized-frame and sized-component - OK resize w/ sized-frame - OK manual frame resize - Invisible: w/ sized-component after setVisible() ++ - CALayer-Sublayer (GL) has additional retain/release when added/removed to be on safe side.
* Fix Bug 691 (part-3): NSOpenGLLayer::openGLContextForPixelFormat(..) on ↵Sven Gothel2013-02-161-0/+8
| | | | | | | | | | | | | | | | | | | | main-thread deadlock'ed due to locked shared context NSOpenGLLayer::openGLContextForPixelFormat(..) is performed on main-thread at 1st NSOpenGLLayer display method. This happened irregulary, i.e. sometimes (T0) right after NSOpenGLLayer creation and attachSurfaceLayer()/AddCASublayer(..), sometimes later (T1). NSOpenGLLayer::openGLContextForPixelFormat(..) uses the passed shared user context. The shared user context is locked at NSOpenGLLayer's creation (T0) and if performed at this early time the call deadlocks due to pthread_mutex wait for the shared user context. This fix performs NSOpenGLLayer creation and layer attachment while the shared user context is kept unlocked and enforces NSOpenGLLayer display and hence NSOpenGLLayer::openGLContextForPixelFormat(..). Added CGL.setNSOpenGLLayerEnabled(..) to enable/disable NSOpenGLLayer - currently not used. - Passed AddRemove tests for GLCanvas/Swing and GLWindow/NewtCanvasAWT w/ 100 loops on Java6 and Java7 on OSX. - Passed Instruments Leaks test w/ 10 loops on Java6 and Java7
* Bug 665 (part 3) - Allow dis-association of GLContext's GLDrawable .. - Add ↵Sven Gothel2013-01-272-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | EGL/ES2 tests, attempt to fix wrapped EGL case - Bug 665 (part 2) was commit 7fd5f76e1eb4bbf93fe9b1171744bd755d8f96e4 - Add EGL/ES2 tests in - TestGLContextDrawableSwitch01NEWT - TestGLContextDrawableSwitch11NEWT - Attempt to fix wrapped EGL case (incomplete) - Using EGL/ES w/ non native EGL device/surface, but natively wrapped instances (most of the cases), a 'complicated' delegation of Native-Upstream -> EGL-Proxy -> EGL-Instance is being used heavily relying on the objects lifecycle. GLEventListenerState tries to roll back the realized state and even sets the upstream device handle, but this doesn't seem to be sufficient on X11. Discussion: It might turn out that we only can implement the survival of GLContext and it's display device reliable w/ EGL within the GLAutoDrawable implementation, which can hold the previous not destructed instances.
* Fix misc API docs ..Sven Gothel2013-01-271-0/+3
|
* ProxySurface: Add 'NativeSurface getUpstreamSurface()' ; ProxySurfaceImpl: ↵Sven Gothel2013-01-261-1/+14
| | | | | | | | | | | | | | Don't cache 'displayHandle' - ProxySurface: Add 'NativeSurface getUpstreamSurface()' allowing querying direct access of a backing surface representing this instance. - Use case: EGLWrappedSurface - Default impl. returns null - ProxySurfaceImpl: Don't cache 'displayHandle' - getDisplayHandle() is 'final', no more 'shortcut' code allowed due to re-association incl. display handle. - See commit b738983638703bb721ee4c9820c8ef43e2252e73
* Bug 665 (part 1) - Allow dis-association of GLContext's GLDrawable ..Sven Gothel2013-01-247-19/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes allowing re-association (incl. null) of GLContext/GLDrawable: - GLAutoDrawable: Refine API doc 'setContext(..)' - GLContext: Refine API doc: 'setGLDrawable(..)' 'getGLDrawable()' - GLContextImpl.setGLDrawable(): Handle null drawable - GLAutoDrawableDelegate/GLAutoDrawableBase: Allow null GLContext - GLDrawableHelper.switchContext(..)/recreateGLDrawable(): Balance GLContext.setGLDrawable(..) calls - New GLEventListenerState, holding state vector [GLEventListener, GLContext, .. ] impl. relocation of all components from/to GLAutoDrawable. - GLDrawableUtil - Using GLEventListenerState for swapGLContextAndAllGLEventListener(..) +++ NEWT Window*: - getDisplayHandle() is 'final', no more 'shortcut' code allowed due to re-association incl. display handle. - close*: - close config's device (was missing) - null config +++ Changes allowing reconfig of Display handle as required to re-associate pre-existing GLContext to a 'window': - AbstractGraphicsDevice: Add isHandleOwner() / clearHandleOwner() - Impl. in X11GraphicsDevice and EGLGraphicsDevice, NOP in DefaultGraphicsDevice - DefaultGraphicsConfiguration add 'setScreen(..)' - MutableGraphicsConfiguration - Make DefaultGraphicsConfiguration.setScreen(..) public - NativeWindowFactory add 'createScreen(String type, AbstractGraphicsDevice device, int screen)' - Refactored from SWTAccessor - NativeWindow x11ErrorHandler: Dump Stack Trace in DEBUG mode, always.
* Android: Allow selection of native window formats RGBA8888, RGBX8888 and ↵Sven Gothel2013-01-201-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | RGB565; Fix HiSilicon/Vivante/Immersion.16 EGLConfig selection (zero depth buffer @ visualID) - NEWT/Android Fix PixelFormat/NativeWindowFormat/VisualID Selection - Fix allows proper selection of native window formats: RGBA8888, RGBX8888 and RGB565 - Selection is performed in 3 steps: 1) @ Construction (non native): SurfaceHolder.setFormat( getSurfaceHolderFormat( caps ) ) 2) @ Native Surface Creation: getANativeWindowFormat( androidFormat) -> ANativeWindow_setBuffersGeometry(..) Note: The set native format is revalidated, i.e. read out via ANativeWindow_getFormat(..). 3) @ EGL Creation: ANativeWindow_getFormat(..) -> fixCaps(..) - simply fixing the chosen caps. - NEWT GLWindow.GLLifecycleHook.resetCounter: - Also reset GLAnimatorControl's counter, if attached. - NEWT WindowImpl -> GLLifecycleHook.resetCounter() calls issued _after_ operation before unlock(). - JOGL/EGLGraphicsConfigurationFactory - Validate whether the visualID matching EGLConfig depth buffer is suitable. On HiSilicon/Vivante/Immersion.16: Depth buffer w/ matching visualID is zero! - NativeWindow/Capabilities.compareTo: Fix alpha comparison
* SWTAccessor: OS_gtk_widget_unrealize optional (SWT 4.3) ; decorate ↵Sven Gothel2012-11-261-5/+14
| | | | PrivilegedAction for static initSingleton block (SWTAccessor, NewtFactory, NativeWindowFactory)
* MacOSXCGLContext[NSOpenGLLayer/NSView]: Propagate drawable changeSven Gothel2012-11-041-0/+3
| | | | | | | Propagate drawable change to MacOSXCGLContext where either context/NSView or context/NSOpenGLLayer association needs to get updated. Fixes drawable/context switch.
* jogl: use Boolean TRUE/FALSE constants for values that will be immediately ↵Harvey Harrison2012-10-231-2/+2
| | | | | | | | unboxed No reason for ever using new Boolean when the constants are available. Signed-off-by: Harvey Harrison <[email protected]>
* NativeWindowFactory: Remove 'remedy' of Bug 613 Commit ↵Sven Gothel2012-10-021-9/+0
| | | | | | 92398025abdabb2fdef0d78edd41e730991a6f94 GlobalToolkitLock for create/destroy Turns out on it has no effect and ATI prop. driver still has XCB failures at this point.
* Relax Bug 613 workaround of commit 92398025abdabb2fdef0d78edd41e730991a6f94Sven Gothel2012-10-021-26/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Utilizing a GlobalToolkitLock in general to lock the display connection results in deadlock situations where locked surfaces signal other [offscreen] surfaces to render. We have to see whether we find a better solution, for now sporadic XCB assertion still happen. But it is preferrable to point to the root cause, then to jumping through hoops to complicate locking or even to deadlock. Locking: - X11GLXGraphicsConfigurationFactory add missing device locking in: - getAvailableCapabilities - chooseGraphicsConfigurationStatic - Newt/X11Window: Discard display events after window close. Relax ATI XCB/threading bug workaround: - ToolkitProperties: requiresGlobalToolkitLock() -> hasThreadingIssues() - NativeWindowFactory: Don't use GlobalToolkitLock in case of 'threadingIssues' the impact is too severe (see above) - NativeWindowFactory: Add getGlobalToolkitLockIfRequired(): To be used for small code blocks. If having 'threadingIssues' a GlobalToolkitLock is returned, otherwise NullToolkitLock. - X11GLXContext: [create/destroy]ContextARBImpl: Use 'NativeWindowFactory.getGlobalToolkitLockIfRequired()' for extra locking Misc Cleanup: - *DrawableFactory createMutableSurface: Also create new device if type is not suitable - *DrawableFactory createDummySurfaceImpl: Pass chosenCaps and use it (preserves orig. requested user caps)
* Merge remote-tracking branch 'origin/master'Sven Gothel2012-09-301-0/+20
|\
| * Add braces and fix indentation to conform with jogl coding standards.Xerxes Rånby2012-09-301-2/+4
| |
| * ".bcm.vc.iv" is enough now -> NEWT agnostic relative package path.Xerxes Rånby2012-09-301-1/+1
| |
| * _getNativeWindowingType() TYPE_BCM_VC_IV autodetection.Xerxes Rånby2012-09-301-0/+18
| | | | | | | | Signed-off-by: Xerxes Rånby <[email protected]>
* | Workaround for Bug 623: Sporadic XCB assertion failures w/ ATI proprietary ↵Sven Gothel2012-09-304-48/+107
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | driver and w/o native X11 locking The proprietary ATI X11 driver does not handle multi-threaded [GL] clients well, i.e. triggers an XCB assertion 'from time to time'. It almost seems like that the driver either: - aliases all display connections to it's connection name, i.e. server; or - utilizes a build-in display connection w/o locking, used for some reason +++ - X11Lib: Add QueryExtension(dpy, name) allowing early driver determination w/o GL - X11Util detects 'requiresGlobalToolkitLock' and 'markAllDisplaysUnclosable' via X11 extensions. In case certain ATI extensions are available, both are set to true. - X11GLXDrawableFactory: Dropped setting 'markAllDisplaysUnclosable', using X11Util's detection (see above). - New GlobalToolkitLock to satisfy certain driver restrictions (ATI's XCB multithreading bug) - NativeWindowFactory handles new property requiresGlobalToolkitLock, in which case the new GlobalToolkitLock is being used instead of ResourceToolkitLock. - JAWTUtil ToolkitLock locks GlobalToolkitLock 1st to match new 'requiresGlobalToolkitLock' property. - Document static method requirement of X11Util, GDIUtil and OSXUtil via marker interface ToolkitProperties - ToolkitLock: New method 'validateLocked()', allowing use to validate whether the device/toolkit is properly locked and hence to detect implementation bugs. See unit test class: ValidateLockListener
* Fix Bug 616: X11: Remove XInitThreads() dependency while cleaning up device ↵Sven Gothel2012-09-274-89/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | locking, resulting in a native-lock-free impl. The X11 implementation details of NativeWindow and NEWT used the X11 implicit locking facility XLockDisplay/XUnlockDisplay, enabled via XInitThreads(). The latter useage is complicated within an unsure environment where the initialization point of JOGL is unknown, but XInitThreads() requires to be called once and before any other X11 calls. The solution is simple and thorough, replace native X11 locking w/ 'application level' locking. Following this pattern actually cleans up a pretty messy part of X11 NativeWindow and NEWT, since the generalization of platform independent locking simplifies code. Simply using our RecursiveLock also speeds up locking, since it doesn't require JNI calls down to X11 anymore. It allows us to get rid of X11ToolkitLock and X11JAWTToolkitLock. Using the RecursiveLock also allows us to remove the shortcut of explicitly createing a NullToolkitLocked device for 'private' display connections. All devices use proper locking as claimed in their toolkit util 'requiresToolkitLock()' in X11Util, OSXUtil, .. Further more a bug has been fixed of X11ErrorHandler usage, i.e. we need to keep our handler alive at all times due to async X11 messaging behavior. This allows to remove the redundant code in X11/NEWT. The AbstractGraphicsDevice lifecycle has been fixed as well, i.e. called when closing NEWT's Display for all driver implementations. On the NEWT side the Display's AbstractGraphicsDevice semantics has been clarified, i.e. it's usage for EDT and lifecycle operations. Hence the X11 Display 2nd device for rendering operations has been moved to X11 Window where it belongs - and the X11 Display's default device used for EDT/lifecycle-ops as it should be. This allows running X11/NEWT properly with the default usage, where the Display instance and hence the EDT thread is shared with many Screen and Window. Rendering using NEWT Window is decoupled from it's shared Display lock via it's own native X11 display. Lock free AbstractGraphicsDevice impl. (Windows, OSX, ..) don't require any attention in this regard since they use NullToolkitLock. Tests: ====== This implementation has been tested manually with Mesa3d (soft, Intel), ATI and Nvidia on X11, Windows and OSX w/o any regressions found in any unit test. Issues on ATI: ============== Only on ATI w/o a composite renderer the unit tests expose a driver or WM bug where XCB claims a lack of locking. Setting env. var 'LIBXCB_ALLOW_SLOPPY_LOCK=true' is one workaround if users refuse to enable compositing. We may investigate this issue in more detail later on.
* NativeWindowFactory/NEWT: Use relative sub-package names in ↵Sven Gothel2012-09-201-7/+7
| | | | | | | | | | | | | | NativeWindowFactory's TYPE_* strings, not NEWT's; NEWTFactory: Use default NEWT package name if rel. 'path'. Use relative sub-package names in NativeWindowFactory's TYPE_* strings, not NEWT's Otherwise NEWT depends solely on NativeWindowFactory strings - Default subpackages denominate a relative path, i.e. start with a dot: '.egl', '.windows', '.x11' - Custom name may be absolute, eg: 'my.company.special.drivers.chip4' NEWTFactory: Use default NEWT package name if relative 'path'. - If NativeWindowFactory type starts w/ dot (rel. path), simply prepend the default NEWT package prefix otherwise use complete package name as-is.
* Seamless Integration of an FBObject based GLFBODrawable as ↵Sven Gothel2012-09-154-214/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GLOffscreenAutoDrawable.FBO and as an OffscreenLayerSurface's drawable (OSX) - Fix Bugs 569 and 599 Summary: ========= The new FBObject based GLFBODrawable implementation allows the seamless utilization of FBO offscreen rendering in single buffer, double buffer and MSAA mode. The GLFBODrawable uses a parent drawable based on a dummy surface to allow a GLOffscreenAutoDrawable.FBO creation or a mutable surface supporting an existing offscreen layer surface (OSX CALayer). Offscreen GLDrawable's and GLOffscreenAutoDrawable's can be selected via the GLCapabilities. If simply !onscreen is selected in the caps instance w/o enabling FBO, PBuffer or Bitmap, the factory will automatically choose regarding availability: FBO > PBuffer > Bitmap Double buffering is supported in MSAA more (intrinsic) and explicit in non MSAA. It is preferred when delivering resources (texture id's or framebuffer names) to a shared GLContext. This is demonstrated in (emulates our OSX CALayer implementation): TestFBOOffThreadSharedContextMix2DemosES2NEWT, TestFBOOnThreadSharedContext1DemoES2NEWT and with the OSX JAWT OffscreenLayerSurface itself. FBO is the preferred choice. +++ Offscreen drawables can be resized while maintaining a bound GLContext (e.g. w/ GLAutoDrawable). Previously both, drawable and context, needed to be destroyed and recreated at offscreen resize. Common implementation in GLDrawableHelper is used in the implementations (NEWT's GLWindow, AWT GLCanvas, SWT GLCanvas). +++ Tested: ======= Manually run all unit tests on: - Linux x86_64 NVidia/AMD/Mesa3d(ES) - OSX x86_64 NVidia - Windows x86_64 NVidia - Android arm Mali-400/Tegra-2 No regressions. Disclaimer: =========== This feature is committed almost in one patch. Both previous commits were introducing / fixing the capabilities behavior: 90d45928186f2be99999461cfe45f76a783cc961 9036376b7806a5fc61590bf49404eb71830de92f I have to appologize for the huge size and impact (files and platforms) of this commit however, I could not find a better way to inject this feature in one sane piece. NativeWindow Details: ===================== Complete decoupling of platform impl. detail of surfaces implementing ProxySurface. Used to generalize dummy surfaces and EGL surfaces on top of a native platform surface. - ProxySurface.UpstreamSurfaceHook -> UpstreamSurfaceHook - abstract class ProxySurface -> interface ProxySurface + ProxySurfaceImpl - Misc. implementations JOGL Details: ===================== FBOObject: API Change / Simplification & Usability - Removed reference counter to remove complexity, allow user to choose. - Add 'dispose' flag for detachColorbuffer(..), allowing to keep attachment alive - Fix equals operation of Attachment - Check pre-exising GL errors - Interface Colobuffer gets lifecycle methods - Add static factory methods to create Attachments w/o FBObject instance - Reset: - Clip min size to 1 - Keep alive samplingSink, i.e. don't issue resetMSAATexture2DSink(..). It gets called at syncFramebuffer()/use(..) later on before actual usage. This allows the consumer to utilize the GL_FRONT buffer until (e.g.) swap. - misc bugfixes GLOffscreenAutoDrawable: API Change - Reloc and interfacing - class com.jogamp.opengl.OffscreenAutoDrawable -> javax.media.opengl.* interfaces GLOffscreenAutoDrawable extends GLAutoDrawable GLOffscreenAutoDrawable.FBO extends GLOffscreenAutoDrawable, GLFBODrawable - Added general implementation and FBO specialization - Replacing GLPBuffer (deprecated) .. usable for any offscreen GLDrawable via factory GLAutoDrawable: - Add 'GLDrawable getDelegatedDrawable()' - Refine documentation of setContext(..), remove disclaimer and fixme tags GLDrawableFactory: - Refine API doc and it's selection mechanism for offscreen. - Add createOffscreenDrawable(..) - Add createOffscreenAutoDrawable(..) - Add canCreateFBO(..) - Mark createGLPbuffer(..) deprectated Mark GLPBuffer deprecated New: GLFBODrawable extends GLDrawable GLCanvas (AWT and SWT): Add offscreen resize support w/o GLContext recreation GLAutoDrawableBase .. GLWindow: - Add offscreen resize support w/o GLContext recreation - Remove double swapBuffer call - GLBase/GLContext: - Add: - boolean hasBasicFBOSupport() - boolean hasFullFBOSupport() - int getMaxRenderbufferSamples() - boolean isTextureFormatBGRA8888Available() GLContext: Fix version detection and hasGLSL() - Version detection in setGLFunctionAvailability(..) - Query GL_VERSION ASAP and parse it and compare w/ given major/minor - Use parsed version if valid and lower than given _or_ given is invalid. - Use validated version for caching (procaddr, ..), version number, etc. - Fix hasGLSL() Since 'isGL2ES2()' is true if 'isGL2()' and the latter simply alows GL 1.*, we confine the result to a GL >= 2.0 on desktops. FIXME: May consider GL 1.5 w/ extensions. - return isGL2ES2(); + return isGLES2() || + isGL3() || + isGL2() && ctxMajorVersion>1 ; GLDrawableImpl: - Add 'associateContext(GLContext, boolean)' allowing impl. to have a (weak) reference list of bound context. This is was pulled up from the OSX specific drawable impl. - swapBuffersImpl() -> swapBuffersImpl(boolean doubleBuffered) and call it regardless of single buffering. This is required to propagate this event to impl. properly, i.e. FBODrawable requires a swap notification. - Clarify 'contextMadeCurrent(..)' protocol GLDrawableHelper: - Add resize and recreate offscreen drawable util method - Simplify required init/reshape calls for GLEventListener - GLGraphicsConfigurationUtil: - fixWinAttribBitsAndHwAccel: Reflect sharede context hw-accel bits - OSX has no offscreen bitmap, use pbuffer - use proper offscreen auto selection if offscreen and no modes are set EGL Context/Drawable/DrawableFactory: Abstract native platform code out of base classes - Use EGLWrappedSurface w/ UpstreamSurfaceHook to handle upstream (X11, WGL, ..) lifecycle - in case the EGL resource is hooked up on it. Invisible dummy surfaces: All platforms - size is now reduced to 64x64 and decoupled of actual generic mutable size - fix device lifecycle, no more leaks +++ OSX ==== Enable support for GLFBODrawableImpl in offscreen CALayer mode - NSOpenGLImpl: hooks to calayer native code - calayer code: - allows pbuffer and texures (FBO) - decouple size and draw calls avoiding flickering - enable auto resize of calayer tree MacOSXCGLContext: - NSOpenGLImpl: - Fix false pbuffer 'usage', validate the pointer - If !pbuffer, copy other window mode bits of caps - MacOSXCGLGraphicsConfiguration: - Only assume pbuffer if !onscreen - Remove reference of native pixelformat pointer Native code: - use 'respondsToSelector:' query before calling 'new' methods avoiding an error message where unsuported (prev. OSX versions) - if monitor refresh-rate is queried 0, set to default 60hz - add missing NSAutoreleasePool decoration +++ Android / NEWT: =============== Issue setVisible(..) w/o wait, i.e. queue on EDT, @Android surfaceChanged() callback. Otherwise we could deadlock: setVisible(..) -> EDT -> setVisibleImpl(..) -> 'GL-display'. the latter may may cause havoc while Android-EDT is blocked [until it's return].
* Fix window mode attribute bit FBO_BIT usage in platform dependent code (map ↵Sven Gothel2012-09-081-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | it to native type) ; OSX Caps selection ; WGL/GDI BITMAP fix Fix window mode attribute bit FBO_BIT usage in platform dependent code (map it to native type) All platform dependent winAttrBit mapping: 'nativeType -> winAttrBit' and 'GLCapabilities -> winAttrBits' shall replace FBO_BIT w/ the native type of the wrapper surface, i.e. WINDOW_BIT (X11, WGL, CGL) or PBUFFER_BIT (EGL). This condenses to changes in - EGLGraphicsConfiguration: EGLConfigDrawableTypeBits / GLCapabilities2AttribList - X11GLXGraphicsConfiguration: FBCfgDrawableTypeBits, XVisualInfo2GLCapabilities / GLCapabilities2AttribList - WindowsWGLGraphicsConfiguration: AttribList2DrawableTypeBits, PFD2DrawableTypeBits / GLCapabilities2AttribList - OSX CGL/NS requires changes in MacOSXCGLContext, i.e. fix the surface mode of NSPixelFormat2GLCapabilities, CGLPixelFormat2GLCapabilities results. This change is included in the upcoming commit (class is heavily edited). OSX chooseGraphicsConfigurationStatic: Add missing 'GLGraphicsConfigurationUtil.fixGLCapabilities(..)' call - all platform impl. require to fix the given user caps due to the new offscreen auto selection mode WindowsWGLGraphicsConfiguration*: ARB / GDI updateGraphicsConfiguration*() - ARB method detects early whether it's suitable for given HDC, i.e. in case of BITMAP (it's not here) - GDI methods detect failure while choosing PFD and doesn't care of DOUBLEBUFFER in case of bitmap (fixes BITMAP usage) Capabilities/GLCapabilities: - Fix missing double-buffer check in GLCapabilities.equals() - add 'copyFrom(..)' method copy all data from give caps
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 08:17:50 +0000