aboutsummaryrefslogtreecommitdiffstats
path: root/src/nativewindow/classes
Commit message (Collapse)AuthorAgeFilesLines
* Fix Bug 816: JAWTWindow.getLocationOnScreenNonBlocking(..) shall use ↵Sven Gothel2013-09-272-11/+31
| | | | | | | | | | | | | | | | | | | | | | | | JRootPane for last position offset; AWTMisc.getInsets(..) add special JRootPane case. Please note that we use JAWTWindow.getLocationOnScreenNonBlocking(..) to determine the location on the screen 'only' b/c we cannot allow AWT to aquire the tree-lock! The latter would be the case if using AWT's 'getLocationOnScreen()'. If anybody has a more reliable implementation to achieve the same .. please provide your patch! The following fix has been performed to fix the last issue w/ vZome. - JAWTWindow.getLocationOnScreenNonBlocking(..) shall use JRootPane for last position offset - w/ vZome, the frame's position was 0/0 (invalid), instead JRootPane's position is good. Use JRootPane's position and stop traversing here (LW top-level). - AWTMisc.getInsets(..) add special JRootPane case. + * Exception is JRootPane. + * Return it's parent's Window component's insets if available, + * otherwise return JRootPane's insets.<br> + * This is due to <i>experience</i> that <i>some</i> JRootPane's + * do not expose valid insets value. -
* Bug 816: Fix JAWTWindow's getLocationOnScreenNonBlocking(); Derive CALayer ↵Sven Gothel2013-09-274-34/+85
| | | | | | | | | | | | | | | | | | | | | | | position from AWT component's location on screen. Track fixedFrame size of root CALayer; Add Split layout to unit test, add [manual] Applet tests. - Fix JAWTWindow's getLocationOnScreenNonBlocking() Skip JRootPane while traversing up to root Container. JRootPane would duplicate the top-level container's offset (Window insets). - Derive CALayer position from AWT component's location on screen. Add Split layout to unit test, add [manual] Applet tests. AWT >= 7u40: - AWT position is top-left w/ insets, where CALayer position is bottom/left from root CALayer w/o insets. - Use getLocationOnScreenNonBlocking() to get location-on-screen w/o insets. - Native code: flip origin AWT < 7u40 still uses fixed position 0/0 for root and sub layer. - Track fixedFrame size of root CALayer - MyCALayer: - Override layoutSublayers to validate root and sub-layer pos/size - Override setFrame to use fixedFrame, if set (similar to MyNSOpenGLLayer) - Add Split layout to unit test, add [manual] Applet tests. - Thx to 'jimthev' and 'Manu' for providing Applet unit tests
* DirectDataBufferInt: createBufferedImage(..) use BufferedImage type value ↵Sven Gothel2013-09-271-24/+83
| | | | | | | | | | | | | | | | | | | | | instead of component-count, support all int types ; Add type 'BufferedImageInt' preserving the custom image-type, add note about TYPE_CUSTOM - createBufferedImage(..) use BufferedImage type value instead of component-count, support all int types - Support all integer data image-type, hence we need to pass image-type instead of component count (collision). - Also pass 'properties' to allow configuring all BufferedImage parameters (just in case) - Return BufferedImageInt to allow user to query the used image-type, see below. - Add type 'BufferedImageInt' preserving the custom image-type, add note about TYPE_CUSTOM - Simply extends BufferedImage w/ custom image-type, since BufferedImage's type is TYPE_CUSTOM due to our custom storage type (see API doc comment). Unit tests: - Testing all integer image-type's in - TestTiledPrintingGearsSwingAWT - TestTiledPrintingNIOImageSwingAWT - Disable all AA print-hints, all AWT text visible on X11. Probably has a regression on Windows / OSX .. TBD.
* Bug 816: Fix OSX CALayer 'quirks' for AWT 1.7.0_40 - See JAWTUtil ↵Sven Gothel2013-09-243-22/+94
| | | | | | | | | JAWT_OSX_CALAYER_QUIRK_SIZE and JAWT_OSX_CALAYER_QUIRK_POSITION. - Provide quirk bits for OSX CALayer depending on used JVM/AWT and act accordingly. - TestBug816OSXCALayerPosAWT: Add resize by frame
* Add 'DirectDataBufferInt' supporting NIO based BufferedImagesSven Gothel2013-09-161-0/+238
| | | | | | | | | | - Contains convenient method to create an NIO backed BufferedImage 'BufferedImage createBufferedImage(int width, int height, int numComponents, Point location)' Standalone test TestTiledPrintingNIOImageSwingAWT 'prints', i.e. renders offscreen, the Frame into - a traditional array-backed BufferedImage - an NIO-backed backed BufferedImage
* Updating doc AWTPrinting.txtSven Gothel2013-09-151-1/+0
|
* Fix AWT printing issues w/ overlapping and/or non-opaque contents ; Change ↵Sven Gothel2013-09-151-0/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AWTPrintLifecycle's lifecycle - AWTPrintLifecycle: - Should decorate: PrinterJob.print(..), instead of within Printable.print(..) { .. container.printAll(..); .. } This is due to AWT print implementation, i.e. AWT will issue Printable.print(..) multiple times for 'overlapping' or non-opaque elements! - Move from javax.media.opengl.awt -> com.jogamp.nativewindow.awt - Make _interface_ AWT agnostic, i.e. remove Graphics2D from 'setup(..)' - Add 'int numSamples' to 'setup(..)' to determine the number of samples - AWTTilePrinter: - Use double precision when scaling image-size and clip-rect, then round them to integer values. Otherwise AWT will use the bounding box for the clipping-rectangular. - Clip negative portion of clip-rect, this removes redundant overpaints, as well as increasing the tile count due to the increased clipping-size. - Clip the image-size in the tile-renderer according to the clip-rect. - DEBUG_TILES: Dump tiles to file - Use sub-image of final BuffereImage instead of adding another clipping region. This might increase performance if no clip-rect has been set. TODO: TestTiledPrintingGearsSwingAWT overlapping tests exposes a 'off by one' bug of the first layer's background! Note: The GL content seems to be correct though - maybe it's simply an AWT rounding error ..
* Fix some JavaDoc and API doc (reference) bugs ..Sven Gothel2013-09-082-0/+7
|
* Test: Don't resize frame, tweek print-matrix; AWTPrintLifecycle: Add scale ↵Sven Gothel2013-09-081-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and convenient AWT container traversal context; GLCanvas/GLJPanel properly handle existing MSAA and req. AA; - Test: Don't resize frame, tweek print-matrix - Use scaleComp72 to scale the frame to fit on page, i.e. global print matrix - Use scaleGLMatXY = 72.0 / glDPI to locally scale on the GL drawable as being passed to AWTPrintLifecycle.setup(..) - Hence frame stays untouched/stable, no need for 'offscreen' print test, which is removed. - AWTPrintLifecycle: Add scale and convenient AWT container traversal context Use a simple decoration for all AWTPrintLifecycle impl. components within a container: final AWTPrintLifecycle.Context ctx = AWTPrintLifecycle.Context.setupPrint(frame, g2d, scaleGLMatXY, scaleGLMatXY); try { } finally { ctx.releasePrint(); } - GLCanvas/GLJPanel properly handle existing MSAA and req. AA; - GLCanvas: Workaround bug where onscreen MSAA cannot switch to offscreen FBO, i.e. stay 'onscreen' - GLJPanel: Use new offscreen FBO if MSAA is requested and not yet used. - GLJPanel.Offscreen.postGL(): always swapBufer(), was missing for !GLSL swapping Results GLCanvas / GLJPanel: - Good scaling - Stable behavior / visibility - High DPI mode works
* Fix Bug 810: Adding Julien Gouesse's fix while moved the new ↵Sven Gothel2013-09-021-17/+13
| | | | 'addNativeJarLibsJoglCfg(..)' to GlueGen, commit c0ead6fa10280f8076704726d59f482b183fd77e
* NativeWindow API Doc: Fix layout / Add version.Sven Gothel2013-07-171-55/+39
|
* Remedy for Bug 782: Issue Debug.initSingleton() or Debug.debug(..) before ↵Sven Gothel2013-07-173-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | calling 'PropertyAccess.isPropertyDefined(propName, default)' through Debug class. Calling 'Debug.isPropertyDefined(propName, default)' may be 'optimized' to 'PropertyAccess.isPropertyDefined(propName, default)', which would skip the modules Debug's class initialization. Iff that happens, an AccessControlException may happen, due to requesting an insecure property, since modules own Debug class has not been added it's trusted prefixes from within it's init block yet. This seems to be a bug of the JVM .. to me, however .. the above description is the only able to explain the issue at hand. +++ Fix calls Debug class own static methods, either Debug.initSingleton() or Debug.debug(), before calling 'isPropertyDefined(propName, default)'. +++ Also mark Debug class static methods final! +++
* StringBuffer -> StringBuilderSven Gothel2013-07-152-2/+2
|
* NEWT MonitorMode test cases: Add X11 XRandR commandline reset to ↵Sven Gothel2013-07-091-1/+4
| | | | | | | | UITestCase's AfterClass if available (X11). In case a MonitorMode test case fails, force XRandR reset '-s 0 -o normal' at end of test class if X11. Unit Test: TestScreenMode00cNEWT
* Add Comparable<?>: Point*, Dimension*, Rectangle*, SurfaceSize* and ↵Sven Gothel2013-06-307-5/+105
| | | | | | | | | | | MonitorMode* ; Sort List<MonitorMode> in descending order to be well determined. Add Comparable<?>: Point*, Dimension*, Rectangle*, SurfaceSize* and MonitorMode*: - Compare square values - See API doc for order of special semantics (flags, rotation, ..) Sort List<MonitorMode> in descending order to be well determined: - Removes order by native mode id, give user a reliable natural order.
* Refine cb7118fc875b6722803e4b11d5681671962a8d3a: Unify get next/prev focus ↵Sven Gothel2013-06-241-21/+10
| | | | component method.
* Fix NewtCanvasAWT focus traversal for Java7 (Take 2): Commit ↵Sven Gothel2013-06-231-0/+39
| | | | | | | | | | | | 70bf3a4ec44504b86294a332255aaae8d2e86bf4 was not sufficient. Commit 70bf3a4ec44504b86294a332255aaae8d2e86bf4 did not work out on Windows. Solution now gathers the next or previous 'to be focused' component, using the FocusTraversalPolicy of the visible/focusable/enabled container. Then we simply request it's focus. Works w/ Java7 on Linux and Windows.
* Fix Bug 761 (part 1/2): Move GLDrawableFactory.shutdownHook -> ↵Sven Gothel2013-06-231-23/+75
| | | | | | | | | | | | | | | | | | NativeWindowFactory.shutdownHook, the latter handles customShutdownHooks for NativeWindow, JOGL and NEWT. Unifying our shutdown mechanism is required to provide a controlled shutdown sequence. NativeWindowFactory is chosen to be the new central entry point, since it is the lowest denominator (common module). - Move GLDrawableFactory.shutdownHook -> NativeWindowFactory.shutdownHook Reverse the shutdown dependency for clarity and availability to all modules, i.e. NEWT may not know about JOGL. Remove the 'gamma' shutdown hook, instead simply call GLDrawableFactoryImpl.resetDisplayGamma() before destroy. NativeWindowFactory.shutdownHook handles customShutdownHooks for NativeWindow, JOGL and NEWT - Modules can register their shutdown runnable at head or tail of list. - Allows controlled shutdown across all modules.
* X11Util: Fix comment on markAllDisplaysUnclosable semantics, add 'final', ↵Sven Gothel2013-06-231-8/+8
| | | | reorder globalLock/isJVMShuttingDown branch/sync
* AWTGraphicsConfiguration: Allow null capsRequested; NewtCanvasAWT: Avoid NPE ↵Sven Gothel2013-06-151-1/+5
| | | | @ addNotify() w/o newtChild
* Support specifying the X11 default display with a system propertyMaik Riechert2013-06-131-1/+2
| | | | | | | | | Usually, the environment variable DISPLAY is used to define the default display under X11. There are cases where the default display has to be defined or overridden programmatically. For those cases, the new system property nativewindow.x11.display.default can be used (as environment variables can't be changed in Java). Its semantics are identical to the DISPLAY environment variable.
* Adapt to GlueGen commit 1a01dce6c42b398cdd68d405828774a3ab366456Sven Gothel2013-06-111-14/+10
|
* Bug 747: Allow usage of IdentityHashMap w/ keys: ↵Sven Gothel2013-06-092-4/+15
| | | | | | AbstractGraphicsDevice.getUniqueID() and GLContext.getDeviceVersionAvailableKey() .. both value classes unique, long lived and rare.
* Fix Bug 600 and Bug 721: Adding support for multiple monitors w/ NEWTSven Gothel2013-05-066-6/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Support for all monitor devices and their available modes - X11: Use RandR 1.3 if available - Retrieve information - Changing a monitor device's mode - Support for dedicated and spannig fullscreen - See <http://jogamp.org/files/screenshots/newt-mmonitor/html/> - TODO: - X11 RandR does _not_ relayout the virtual screen size and neither the CRT's viewport. We may need to relayout them if they were covering a seamless region to achieve same experience! - OSX: No machine to attach a secondary CRT -> TEST! - Tested Manually for Regressions - Linux ARMv6hf (Rasp-Pi/BCM, Panda/X11) - Android (Huawei, Kindle) - Tested Manually and junit: - X11/Linux - NV, ATI-Catalyst w/ 2 CRTs - VBox w/ 4 CRTs - Win/Windows - NV, w/ 2 CRTs - VBox w/ 4 CRTs - X11/OpenIndiana, NV, 1 CRT
* Fix JAWTUtil's ToolkitLock: Using RecursiveLock instance covering the AWT ↵Sven Gothel2013-04-231-70/+57
| | | | lock instead of simple volatile fields (bug).
* Fix Bug 722: Make GLEventListenerState 'transaction' safe Animator.pause[ ↵Sven Gothel2013-04-233-2/+59
| | | | | | | | | | | | | | | | | | | | | surface.lock[ modify ] ] GLEventListenerState: New model for GLEventListenerState's transaction safety: - Z Decorate-1: Animator.pause [ X ] Animator.resume - X Decorate-2: Surface.lock [ Y ] Surface.unlock - Instead of setting AbstractGraphicsDevice, just swap the handle and ownership. - Issuing setRealized(..) only if required, i.e. having an upstream-surface (EGL..) depending on used device - Utilizing setRealized(..) on the GLAD's delegated 'real' drawable, avoiding optional GLAD locking. - Cleanup and above changes shall render impl. easier to read. GLEventListenerState Unit Tests: - If swapping/moving from AWT -> NEWT, use a NEWT dedicated Display avoiding ATI driver XCB crash - read comment.
* *Capabilities: Cleanup string ctor; GLGraphicsConfigurationUtil: Clean ↵Sven Gothel2013-04-171-3/+8
| | | | getExclusiveWinAttributeBits(..); WGLGLCapabilities: Add PFD2String(..)
* Fix Bug 705 - Cleanup & Generalize Commit ↵Sven Gothel2013-04-161-37/+36
| | | | | | | | | | | | | | | | | | | | | | | 5b47372590ec715647ebbd75d70c41ec7a64485a ; Close X11 Display in isDeviceSupported() - Moved GL vendor version parsing to GLVersionNumber - Moved X11Util.markAllDisplaysUnclosable() trigger into SharedResource creation of - X11GLXDrawableFactory - EGLDrawableFactory - GLProfile is back to pre 5b47372590ec715647ebbd75d70c41ec7a64485a, i.e. contains no quirk artifact (clean) - Close X11 Display in X11GLXDrawableFactory.isDeviceSupported() Regression of 9a4fcc7ea4ec61e4ceed791acced734ac04ea270 - TODO: Remove X11Util markAllDisplaysUnclosable detection code ? Notes to Martin: - Use TAB == 4 SPACES - No author names into source code, git commit log is enough. - No need to tag your edits, the diff is enough.
* Fix Bug 705 - Make Mesa X11 driver < 8.0 use new Quirk ↵Martin Hegedus2013-04-151-4/+33
| | | | DontCloseX11DisplayConnection
* OSX/CALayer Threading Part4: Stream all JAWT Root CALayer Operations on OSX ↵Sven Gothel2013-04-042-89/+58
| | | | | | | | | | | | Main-Thread Previous code created, set and unset the root CALayer on the current thread, which lead to a very delayed destruction of the root CALayer w/. With Java7 this lead to a possible resource starvation in certain situations, since Java7 uses an CAOpenGLLayer. Similar w/ f354fb204d8973453c538dda78a2c82c87be61dc, creation, set and unset is operated on main-thread.
* JAWTWindow: Issue component.repaint() after attachSurfaceLayer(..), ↵Sven Gothel2013-04-031-1/+1
| | | | otherwise no rendering result might be visible w/o Animator
* Adapt to new version scheme, see GlueGen ↵Sven Gothel2013-03-281-3/+5
| | | | | | | a3f2ef50ad33c58a240a17fcf03e415d772207c3, etc; Fix NewtVersion, NativeWindowVersion and NewtVersionActivityLauncher NewtVersion, NativeWindowVersion: Also search for extension javax.media.opengl (all packaging) NewtVersionActivityLauncher: Use new launcher URI
* OSX/CALayer: OSX/CALayer Threading Part3 - Run CALayer ops in a streaming ↵Sven Gothel2013-03-196-87/+127
| | | | | | | | | | | | | | | | | | | | | | | | | | | design on main-thread w/o [infinitive] blocking History: Part1 commit 896e8b021b39e9415040a57a1d540d7d24b02db1 (Run CALayer Ops on current thread to avoid blocking) Part2 commit 28c6472335b924080d638b33a28f8f4eedb459b1 (Run CALayer Ops on main-thread w/o blocking) Dependency: GlueGen commit 4becdfa125b07ff969d6540e1112735b53cd15eb (Fix RecursiveLockImpl* Timeout corner case) Part2 misses essential locking of the OpenGL context (and it's surface upfront) while creating the NSOpenGLLayer instance. The latter instantiates a OpenGL context shared w/ JOGL's, hence it cannot be locked. Encapsulating NSOpenGLLayer creation/attachment and it's detachment/release in sub-classes AttachNSOpenGLLayer and DetachNSOpenGLLayer, where instances will be streamed on main-thread. Both tasks are triggered at associateDrawable(boolean bound). The mentioned GL context locking requires disturbs the 'streaming' design considerably in AttachNSOpenGLLayer. It is solved by attempt to acquire the recursive lock of the surface and the context via 'tryLock(maxwait)' w/ screen-vSync-period/2. If the locks could not be acquired completly, the AttachNSOpenGLLayer instance will be re-queued to the main-thread for later execution. Before DetachNSOpenGLLayer is being streamed, it is validated whether AttachNSOpenGLLayer did run. A recursive situation does happen w/ resizing an offscreen pbuffer drawable! Hence extra care is being taken.
* Remodel OSX/CALayer Threading (commit ↵Sven Gothel2013-03-153-43/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 896e8b021b39e9415040a57a1d540d7d24b02db1): Run on main-thread w/o blocking ; Misc Changes Commit 896e8b021b39e9415040a57a1d540d7d24b02db1 moved all native CALayer calls to the current thread to avoid deadlocks. Even though this seemed to be fine at least resource GC (release/dealloc calls) were issued very late in time, probably due to multithreading synchronization of JAWT and/or OSX API. Example: Our 'TestAddRemove01GLCanvasSwingAWT' test didn't freed CALayer resources incl. GL ctx when destroying the objects (AWT Frame, GLCanvas, ..), leading to resource starvation .. eventually. Remedy is a compromise of behavior before commit 896e8b021b39e9415040a57a1d540d7d24b02db1 and that commit, i.e. to run CALayer lifecycle methods on main-thread, but do not block! The careful part within MacOSXCGLContext.associateDrawable(..) performs the following block on main-thread: - lock the context - create NSOpenGLLayer (incl. it's own shared GL context and the DisplayLink) - attach NSOpenGLLayer to root CALayer - unlock the context Due to the GL ctx locking, this async offthread operation is safe within our course of operations. Details: - NSOpenGLContext - Context and CVDisplayLink creation at init - Call [ctx update] if texture/frame size changed - 'waitUntilRenderSignal' uses default TO value if given TO is 0 to avoid deadlocks +++ Misc Changes: - Fix object type detection: isMemberOfClass -> isKindOfClass - OSXUtil_isNSView0 OSXUtil_isNSWindow0, CGL_isNSOpenGLPixelBuffer - MacOSXCGLDrawable/MacOSXPbufferCGLDrawable: remove getNSViewHandle() method. MacOSXCGLContext uses common code to detect nature of the drawable handle. - MacOSXCGLContext/CALayer: Use safe screenVSyncTimeout values, never 0 to avoid deadlock! - JAWTWindow.invalidate: Call detachSurfaceLayer() if not done yet
* OSX/CALayer: Simplify FixCALayerLayout()/layoutSurfaceLayer() call, no more ↵Sven Gothel2013-03-144-24/+42
| | | | | | | | | | | | need for explicit call - OffscreenLayerSurface.layoutSurfaceLayer() removed, no more required - JAWTWindow adds a ComponentListener, which issues FixCALayerLayout() at resized, moved and shown. - MyNSOpenGLLayer no more requires fix*Size() methods - MyNSOpenGLLayer::setDedicatedSize() need no explicit CATransaction, performed by caller.
* OSX/CALayer: Revise CALayer 'RunOnMainThread' utilization, avoiding deadlocksSven Gothel2013-03-143-45/+34
| | | | | | | | | | | | | | | | | | | | | | RunOnMainThread(waitUntilDone:=true,..) can deadlock the main-thread if called from AWT-EDT, since the main-thread may call back to AWT-EDT while injecting a new main-thread task. This patch revises all RunOnMainThread CALayer usage, resulting in only one required left: - OSXUtil.AddCASublayer() w/ waitUntilDone:=false Hence the CALayer code has no more potential to deadlock main-thread/AWT-EDT. OSXUtil.AddCASublayer() must be performed on main-thread, otherwise the CALayer attachment will fail - no visible rendering result. +++ Note: A good trigger to test this deadlock is to magnify/zoom the OSX desktop (click background + ctrl-mouse_wheel) before running some unit tests. TestGLCanvasAWTActionDeadlock01AWT and TestAddRemove02GLWindowNewtCanvasAWT also have the potential to trigger the mentioned deadlock.
* Minor Changes: EGLDisplayUtil: Add stack trace in DEBUG mode for opened ↵Sven Gothel2013-03-131-11/+22
| | | | DPYs; JAWTWindow: Add JAWT info in toString()
* Fix AWT EDT Deadlock in AWTWindowClosingProtocol, regression of commit ↵Sven Gothel2013-02-281-9/+2
| | | | 808a9a27a8c1c9e0a6701a8dd81d51f8daa8129d
* Fix NEWT/AWT WindowClosing Unit Tests ; Review/Cleanup NEWT WindowClosing ↵Sven Gothel2013-02-283-39/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mechanism Due to a NEWT WindowClosing event regression cause by NewtCanvasAWT changes a review of our WindowClosing event mechanism was required. Important cleanups are marked w/ '(*)' below. I would have preferred to change the 'WindowListener.windowDestroyNotify(WindowEvent)' method to pass a WindowCloseEvent object exposing more information like toolkit or programmatic destruction and passing whether a 'closing' or 'nop' action will be performed based on the WindowClosingMode. For now I postponed this idea .. since it would change the API again, but may reconsider it after merging the Android 'closing' patch. - InputEvent.consumedTag -> NEWTEvent.consumedTag - Window - (*) Promote setWindowDestroyNotifyAction(Runnable) to public, former WindowImpl.setHandleDestroyNotify(boolean). Using a Runnable action for WindowImpl.windowDestroyNotify(boolean) allows a setting defined alternative for destroy() and gets rid of [ab]using WindowListener.windowDestroyNotify(WindowEvent) for lifecycle actions. Used in: - GLWindow - GLAutoDrawableDelegate impl. - WindowImpl - Respect NEWTEvent.consumedTag for WindowEvents as well - (*) Impl. setHandleDestroyNotify(boolean) (see above) - (*) destroy() simply sends out pre- and post- destruction Window events, where windowDestroyNotify(boolean) sends out the pre-destruction event if NOP. - (*) windowDestroyNotify(boolean) is public now, allowing other impl. details to follow proper destruction using handleDestroyNotify Runnable (-> NewtCanvasAWT). - AWTWindowClosingProtocol: - addClosingListenerOneShot() -> addClosingListener() - calling addClosingListener() at addNotify() - calling removeClosingListener() at removeNotify() - AWTWindowClosingProtocol ctor taking NOP runnable, allowing to send WindowEvent.EVENT_WINDOW_DESTROY_NOTIFY at WindowClosingMode.DO_NOTHING_ON_CLOSE - add/remove listener on AWT-EDT - AWTWindowAdapter - Add 'removeWindowClosingFrom(..)', allowing to remove window closing event fwd. - Also fwd windowClosed in window closing fwd'ing. - NewtCanvasAWT - (*) Utilize AWTWindowClosingProtocol NOP runnable (see above) to fwd closing-NOP event to NEWT - (*) Unify remove/destroy code in destroyImpl(..) - !removeNotify -> destroy NEWT child programatic or as toolkit event - removeNotify || windowClosing -> destroy jawtWindow - (*) Remove AWTWindowAdapter/AWTParentWindowAdapter's windowClosingListener, since we utilize AWTWindowClosingProtocol - DisplayImpl - Adding 'final void dispatchMessage(final NEWTEvent event)' allowing to remove the NEWTEventTask wrapping for no reason in enqueueEvent(..) if on EDT and waiting.
* Fix CALayer pos/size and animation.b01Sven Gothel2013-02-222-7/+11
| | | | | | | | | | | | | | | - Fix CALayer animation: - All CALayer animations are set to nil via overriding 'actionForKey' - Fix CALayer pos/size bug: - Fix root and sub CALayer position to 0/0 and size on the main-thread w/o blocking. - If the sub CALayer implements the Objective-C NativeWindow protocol NWDedicatedSize (e.g. JOGL's MyNSOpenGLLayer), the dedicated size is passed to the layer, which propagates it appropriately. - On OSX/Java7 our root CALayer's frame position and size gets corrupted by its NSView, hence we have created the NWDedicatedSize protocol.
* TestNewtEventModifiers*: Robostness (uhh) Unify wait-clear result code - fix ↵Sven Gothel2013-02-211-0/+17
| | | | SWT event dispatching.
* OSX/Java7/CALayer + JAWT: Partially Fix AWT/NEWT CALayer 'out of sight' bug, ↵Sven Gothel2013-02-204-6/+66
| | | | | | | | | | | | | | | | | | | | | | | | | where our CALayer is moved out of the visible area - same erroneous behavior for GLCanvas and NewtCanvasAWT - sized-frame: Set framesize and validate() it - sized-component: Set component preferred size and call frame.pack() - added workaround 'OffscreenLayerSurface.layoutSurfaceLayer()' to fix CALayer size, which snaps for: - OK initial size before setVisible: sized-frame and sized-component - OK resize w/ sized-frame - OK manual frame resize - Invisible: w/ sized-component after setVisible() ++ - CALayer-Sublayer (GL) has additional retain/release when added/removed to be on safe side.
* Fix Bug 691 (part-3): NSOpenGLLayer::openGLContextForPixelFormat(..) on ↵Sven Gothel2013-02-162-0/+36
| | | | | | | | | | | | | | | | | | | | main-thread deadlock'ed due to locked shared context NSOpenGLLayer::openGLContextForPixelFormat(..) is performed on main-thread at 1st NSOpenGLLayer display method. This happened irregulary, i.e. sometimes (T0) right after NSOpenGLLayer creation and attachSurfaceLayer()/AddCASublayer(..), sometimes later (T1). NSOpenGLLayer::openGLContextForPixelFormat(..) uses the passed shared user context. The shared user context is locked at NSOpenGLLayer's creation (T0) and if performed at this early time the call deadlocks due to pthread_mutex wait for the shared user context. This fix performs NSOpenGLLayer creation and layer attachment while the shared user context is kept unlocked and enforces NSOpenGLLayer display and hence NSOpenGLLayer::openGLContextForPixelFormat(..). Added CGL.setNSOpenGLLayerEnabled(..) to enable/disable NSOpenGLLayer - currently not used. - Passed AddRemove tests for GLCanvas/Swing and GLWindow/NewtCanvasAWT w/ 100 loops on Java6 and Java7 on OSX. - Passed Instruments Leaks test w/ 10 loops on Java6 and Java7
* Fix Bug 691 (part-2): Extra '[subLayer release]' is wrong, since ↵Sven Gothel2013-02-151-3/+13
| | | | | | | | | | | | | | | | | | | | 'CGL.releaseNSOpenGLLayer' triggers release - but very late w/ AWT usage. OSXUtil_RemoveCASublayer0's added '[subLayer release]' in commit f6e6fab2a7ddfb5c9b614cb072c27ff697629161 is wrong, since 'CGL.releaseNSOpenGLLayer' actually does trigger it's release. This was not seen w/ AWT tests, since it happens very later. A NewtCanvasAWT test disclosed this error -> removed that extra release call. The culprit for the late release w/ AWT usage was CGL.createNSOpenGLLayer's call in the current thread. Moving it to the Main-Thread fixed the problem. All CALayer lifecycle calls are issued on the Main-Thread now. NSOpenGLLayer's CVDisplayLink OpenGL fitting via 'CVDisplayLinkSetCurrentCGDisplayFromOpenGLContext' is now performed at it's context creation in 'NSOpenGLLayer::openGLContextForPixelFormat'. The 'extra' release of the NSOpenGLLayer's NSOpenGLContext as introduced in commit f6e6fab2a7ddfb5c9b614cb072c27ff697629161 is still valid.
* Fix OSX CALayer Bug 690 and Bug 691: Occasional Freeze on CVDisplayLinkStop; ↵Sven Gothel2013-02-144-30/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Layers and native GL-Context are _not_ Released ; Java Side wait for Main-Thread - Fix Bug 690: Occasional Freeze on CVDisplayLinkStop - NSOpenGLLayer.disableAnimation() shall not claim the renderLock mutex, since the CVDisplayLink callback could be waiting for the lock. This waiting callback could freeze the call to CVDisplayLinkStop. - Fix Bug 691: Layers and native GL-Context are _not_ Released - Following proper release cycle: Context unrealized: - JAWTWindow.detachSurfaceLayer() -> OSXUtil.RemoveCASublayer(..) - CGL.releaseNSOpenGLLayer(..) JAWTWindow.destroy() - MacOSXJAWTWindow.UnsetJAWTRootSurfaceLayer(..) - OSXUtil.DestroyCALayer(..) - 'Magic' CALayer release calls (w/o manual retain beforehand) at: - OSXUtil.RemoveCASublayer(..): [subLayer release] - MacOSXJAWTWindow.UnsetJAWTRootSurfaceLayer(..): [rootLayer release] - OSXUtil.DestroyCALayer(..): [rootLayer release] - 'Magic' NSOpenGLLayer's NSOpenGLContext dealloc: - [NSOpenGLContext clearDrawable] - CGLDestroyContext( [NSOpenGLContext CGLContextObj] ) - Java Side wait for Main-Thread - Waiting for the delegated Main-Thread on the Java side eases debugging and won't block the Main-Thread in native code. - Utilizing this for all CALayer calls Test case: TestGLCanvasAddRemove01SwingAWT
* Bug 665 (part 3) - Allow dis-association of GLContext's GLDrawable .. - Add ↵Sven Gothel2013-01-273-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | EGL/ES2 tests, attempt to fix wrapped EGL case - Bug 665 (part 2) was commit 7fd5f76e1eb4bbf93fe9b1171744bd755d8f96e4 - Add EGL/ES2 tests in - TestGLContextDrawableSwitch01NEWT - TestGLContextDrawableSwitch11NEWT - Attempt to fix wrapped EGL case (incomplete) - Using EGL/ES w/ non native EGL device/surface, but natively wrapped instances (most of the cases), a 'complicated' delegation of Native-Upstream -> EGL-Proxy -> EGL-Instance is being used heavily relying on the objects lifecycle. GLEventListenerState tries to roll back the realized state and even sets the upstream device handle, but this doesn't seem to be sufficient on X11. Discussion: It might turn out that we only can implement the survival of GLContext and it's display device reliable w/ EGL within the GLAutoDrawable implementation, which can hold the previous not destructed instances.
* Fix misc API docs ..Sven Gothel2013-01-271-0/+3
|
* ProxySurface: Add 'NativeSurface getUpstreamSurface()' ; ProxySurfaceImpl: ↵Sven Gothel2013-01-262-16/+31
| | | | | | | | | | | | | | Don't cache 'displayHandle' - ProxySurface: Add 'NativeSurface getUpstreamSurface()' allowing querying direct access of a backing surface representing this instance. - Use case: EGLWrappedSurface - Default impl. returns null - ProxySurfaceImpl: Don't cache 'displayHandle' - getDisplayHandle() is 'final', no more 'shortcut' code allowed due to re-association incl. display handle. - See commit b738983638703bb721ee4c9820c8ef43e2252e73
* Bug 665 (part 1) - Allow dis-association of GLContext's GLDrawable ..Sven Gothel2013-01-2411-41/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes allowing re-association (incl. null) of GLContext/GLDrawable: - GLAutoDrawable: Refine API doc 'setContext(..)' - GLContext: Refine API doc: 'setGLDrawable(..)' 'getGLDrawable()' - GLContextImpl.setGLDrawable(): Handle null drawable - GLAutoDrawableDelegate/GLAutoDrawableBase: Allow null GLContext - GLDrawableHelper.switchContext(..)/recreateGLDrawable(): Balance GLContext.setGLDrawable(..) calls - New GLEventListenerState, holding state vector [GLEventListener, GLContext, .. ] impl. relocation of all components from/to GLAutoDrawable. - GLDrawableUtil - Using GLEventListenerState for swapGLContextAndAllGLEventListener(..) +++ NEWT Window*: - getDisplayHandle() is 'final', no more 'shortcut' code allowed due to re-association incl. display handle. - close*: - close config's device (was missing) - null config +++ Changes allowing reconfig of Display handle as required to re-associate pre-existing GLContext to a 'window': - AbstractGraphicsDevice: Add isHandleOwner() / clearHandleOwner() - Impl. in X11GraphicsDevice and EGLGraphicsDevice, NOP in DefaultGraphicsDevice - DefaultGraphicsConfiguration add 'setScreen(..)' - MutableGraphicsConfiguration - Make DefaultGraphicsConfiguration.setScreen(..) public - NativeWindowFactory add 'createScreen(String type, AbstractGraphicsDevice device, int screen)' - Refactored from SWTAccessor - NativeWindow x11ErrorHandler: Dump Stack Trace in DEBUG mode, always.
* Android: Allow selection of native window formats RGBA8888, RGBX8888 and ↵Sven Gothel2013-01-201-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | RGB565; Fix HiSilicon/Vivante/Immersion.16 EGLConfig selection (zero depth buffer @ visualID) - NEWT/Android Fix PixelFormat/NativeWindowFormat/VisualID Selection - Fix allows proper selection of native window formats: RGBA8888, RGBX8888 and RGB565 - Selection is performed in 3 steps: 1) @ Construction (non native): SurfaceHolder.setFormat( getSurfaceHolderFormat( caps ) ) 2) @ Native Surface Creation: getANativeWindowFormat( androidFormat) -> ANativeWindow_setBuffersGeometry(..) Note: The set native format is revalidated, i.e. read out via ANativeWindow_getFormat(..). 3) @ EGL Creation: ANativeWindow_getFormat(..) -> fixCaps(..) - simply fixing the chosen caps. - NEWT GLWindow.GLLifecycleHook.resetCounter: - Also reset GLAnimatorControl's counter, if attached. - NEWT WindowImpl -> GLLifecycleHook.resetCounter() calls issued _after_ operation before unlock(). - JOGL/EGLGraphicsConfigurationFactory - Validate whether the visualID matching EGLConfig depth buffer is suitable. On HiSilicon/Vivante/Immersion.16: Depth buffer w/ matching visualID is zero! - NativeWindow/Capabilities.compareTo: Fix alpha comparison
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 16:28:08 +0000