From 55a3e7e548bbc3333318ee55dbab39f016b8d5f6 Mon Sep 17 00:00:00 2001 From: Sven Gothel Date: Thu, 23 Feb 2023 22:10:17 +0100 Subject: FFMPEGMediaPlayer: Replace old FFmpeg header w/ FFmpeg version 4.3, 5.1 and 6.0 (major version counts for binary compatibility) --- .../ffmpeg/v0600/libswresample/swresample.h | 650 +++++++++++++++++++++ 1 file changed, 650 insertions(+) create mode 100644 make/stub_includes/ffmpeg/v0600/libswresample/swresample.h (limited to 'make/stub_includes/ffmpeg/v0600/libswresample/swresample.h') diff --git a/make/stub_includes/ffmpeg/v0600/libswresample/swresample.h b/make/stub_includes/ffmpeg/v0600/libswresample/swresample.h new file mode 100644 index 000000000..d4dcaebdc --- /dev/null +++ b/make/stub_includes/ffmpeg/v0600/libswresample/swresample.h @@ -0,0 +1,650 @@ +/* + * Copyright (C) 2011-2013 Michael Niedermayer (michaelni@gmx.at) + * + * This file is part of libswresample + * + * libswresample is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * libswresample is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with libswresample; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SWRESAMPLE_SWRESAMPLE_H +#define SWRESAMPLE_SWRESAMPLE_H + +/** + * @file + * @ingroup lswr + * libswresample public header + */ + +/** + * @defgroup lswr libswresample + * @{ + * + * Audio resampling, sample format conversion and mixing library. + * + * Interaction with lswr is done through SwrContext, which is + * allocated with swr_alloc() or swr_alloc_set_opts2(). It is opaque, so all parameters + * must be set with the @ref avoptions API. + * + * The first thing you will need to do in order to use lswr is to allocate + * SwrContext. This can be done with swr_alloc() or swr_alloc_set_opts2(). If you + * are using the former, you must set options through the @ref avoptions API. + * The latter function provides the same feature, but it allows you to set some + * common options in the same statement. + * + * For example the following code will setup conversion from planar float sample + * format to interleaved signed 16-bit integer, downsampling from 48kHz to + * 44.1kHz and downmixing from 5.1 channels to stereo (using the default mixing + * matrix). This is using the swr_alloc() function. + * @code + * SwrContext *swr = swr_alloc(); + * av_opt_set_channel_layout(swr, "in_channel_layout", AV_CH_LAYOUT_5POINT1, 0); + * av_opt_set_channel_layout(swr, "out_channel_layout", AV_CH_LAYOUT_STEREO, 0); + * av_opt_set_int(swr, "in_sample_rate", 48000, 0); + * av_opt_set_int(swr, "out_sample_rate", 44100, 0); + * av_opt_set_sample_fmt(swr, "in_sample_fmt", AV_SAMPLE_FMT_FLTP, 0); + * av_opt_set_sample_fmt(swr, "out_sample_fmt", AV_SAMPLE_FMT_S16, 0); + * @endcode + * + * The same job can be done using swr_alloc_set_opts2() as well: + * @code + * SwrContext *swr = NULL; + * int ret = swr_alloc_set_opts2(&swr, // we're allocating a new context + * &(AVChannelLayout)AV_CHANNEL_LAYOUT_STEREO, // out_ch_layout + * AV_SAMPLE_FMT_S16, // out_sample_fmt + * 44100, // out_sample_rate + * &(AVChannelLayout)AV_CHANNEL_LAYOUT_5POINT1, // in_ch_layout + * AV_SAMPLE_FMT_FLTP, // in_sample_fmt + * 48000, // in_sample_rate + * 0, // log_offset + * NULL); // log_ctx + * @endcode + * + * Once all values have been set, it must be initialized with swr_init(). If + * you need to change the conversion parameters, you can change the parameters + * using @ref avoptions, as described above in the first example; or by using + * swr_alloc_set_opts2(), but with the first argument the allocated context. + * You must then call swr_init() again. + * + * The conversion itself is done by repeatedly calling swr_convert(). + * Note that the samples may get buffered in swr if you provide insufficient + * output space or if sample rate conversion is done, which requires "future" + * samples. Samples that do not require future input can be retrieved at any + * time by using swr_convert() (in_count can be set to 0). + * At the end of conversion the resampling buffer can be flushed by calling + * swr_convert() with NULL in and 0 in_count. + * + * The samples used in the conversion process can be managed with the libavutil + * @ref lavu_sampmanip "samples manipulation" API, including av_samples_alloc() + * function used in the following example. + * + * The delay between input and output, can at any time be found by using + * swr_get_delay(). + * + * The following code demonstrates the conversion loop assuming the parameters + * from above and caller-defined functions get_input() and handle_output(): + * @code + * uint8_t **input; + * int in_samples; + * + * while (get_input(&input, &in_samples)) { + * uint8_t *output; + * int out_samples = av_rescale_rnd(swr_get_delay(swr, 48000) + + * in_samples, 44100, 48000, AV_ROUND_UP); + * av_samples_alloc(&output, NULL, 2, out_samples, + * AV_SAMPLE_FMT_S16, 0); + * out_samples = swr_convert(swr, &output, out_samples, + * input, in_samples); + * handle_output(output, out_samples); + * av_freep(&output); + * } + * @endcode + * + * When the conversion is finished, the conversion + * context and everything associated with it must be freed with swr_free(). + * A swr_close() function is also available, but it exists mainly for + * compatibility with libavresample, and is not required to be called. + * + * There will be no memory leak if the data is not completely flushed before + * swr_free(). + */ + +#include +#include "libavutil/channel_layout.h" +#include "libavutil/frame.h" +#include "libavutil/samplefmt.h" + +#include "libswresample/version_major.h" +#ifndef HAVE_AV_CONFIG_H +/* When included as part of the ffmpeg build, only include the major version + * to avoid unnecessary rebuilds. When included externally, keep including + * the full version information. */ +#include "libswresample/version.h" +#endif + +/** + * @name Option constants + * These constants are used for the @ref avoptions interface for lswr. + * @{ + * + */ + +#define SWR_FLAG_RESAMPLE 1 ///< Force resampling even if equal sample rate +//TODO use int resample ? +//long term TODO can we enable this dynamically? + +/** Dithering algorithms */ +enum SwrDitherType { + SWR_DITHER_NONE = 0, + SWR_DITHER_RECTANGULAR, + SWR_DITHER_TRIANGULAR, + SWR_DITHER_TRIANGULAR_HIGHPASS, + + SWR_DITHER_NS = 64, ///< not part of API/ABI + SWR_DITHER_NS_LIPSHITZ, + SWR_DITHER_NS_F_WEIGHTED, + SWR_DITHER_NS_MODIFIED_E_WEIGHTED, + SWR_DITHER_NS_IMPROVED_E_WEIGHTED, + SWR_DITHER_NS_SHIBATA, + SWR_DITHER_NS_LOW_SHIBATA, + SWR_DITHER_NS_HIGH_SHIBATA, + SWR_DITHER_NB, ///< not part of API/ABI +}; + +/** Resampling Engines */ +enum SwrEngine { + SWR_ENGINE_SWR, /**< SW Resampler */ + SWR_ENGINE_SOXR, /**< SoX Resampler */ + SWR_ENGINE_NB, ///< not part of API/ABI +}; + +/** Resampling Filter Types */ +enum SwrFilterType { + SWR_FILTER_TYPE_CUBIC, /**< Cubic */ + SWR_FILTER_TYPE_BLACKMAN_NUTTALL, /**< Blackman Nuttall windowed sinc */ + SWR_FILTER_TYPE_KAISER, /**< Kaiser windowed sinc */ +}; + +/** + * @} + */ + +/** + * The libswresample context. Unlike libavcodec and libavformat, this structure + * is opaque. This means that if you would like to set options, you must use + * the @ref avoptions API and cannot directly set values to members of the + * structure. + */ +typedef struct SwrContext SwrContext; + +/** + * Get the AVClass for SwrContext. It can be used in combination with + * AV_OPT_SEARCH_FAKE_OBJ for examining options. + * + * @see av_opt_find(). + * @return the AVClass of SwrContext + */ +const AVClass *swr_get_class(void); + +/** + * @name SwrContext constructor functions + * @{ + */ + +/** + * Allocate SwrContext. + * + * If you use this function you will need to set the parameters (manually or + * with swr_alloc_set_opts2()) before calling swr_init(). + * + * @see swr_alloc_set_opts2(), swr_init(), swr_free() + * @return NULL on error, allocated context otherwise + */ +struct SwrContext *swr_alloc(void); + +/** + * Initialize context after user parameters have been set. + * @note The context must be configured using the AVOption API. + * + * @see av_opt_set_int() + * @see av_opt_set_dict() + * + * @param[in,out] s Swr context to initialize + * @return AVERROR error code in case of failure. + */ +int swr_init(struct SwrContext *s); + +/** + * Check whether an swr context has been initialized or not. + * + * @param[in] s Swr context to check + * @see swr_init() + * @return positive if it has been initialized, 0 if not initialized + */ +int swr_is_initialized(struct SwrContext *s); + +#if FF_API_OLD_CHANNEL_LAYOUT +/** + * Allocate SwrContext if needed and set/reset common parameters. + * + * This function does not require s to be allocated with swr_alloc(). On the + * other hand, swr_alloc() can use swr_alloc_set_opts() to set the parameters + * on the allocated context. + * + * @param s existing Swr context if available, or NULL if not + * @param out_ch_layout output channel layout (AV_CH_LAYOUT_*) + * @param out_sample_fmt output sample format (AV_SAMPLE_FMT_*). + * @param out_sample_rate output sample rate (frequency in Hz) + * @param in_ch_layout input channel layout (AV_CH_LAYOUT_*) + * @param in_sample_fmt input sample format (AV_SAMPLE_FMT_*). + * @param in_sample_rate input sample rate (frequency in Hz) + * @param log_offset logging level offset + * @param log_ctx parent logging context, can be NULL + * + * @see swr_init(), swr_free() + * @return NULL on error, allocated context otherwise + * @deprecated use @ref swr_alloc_set_opts2() + */ +attribute_deprecated +struct SwrContext *swr_alloc_set_opts(struct SwrContext *s, + int64_t out_ch_layout, enum AVSampleFormat out_sample_fmt, int out_sample_rate, + int64_t in_ch_layout, enum AVSampleFormat in_sample_fmt, int in_sample_rate, + int log_offset, void *log_ctx); +#endif + +/** + * Allocate SwrContext if needed and set/reset common parameters. + * + * This function does not require *ps to be allocated with swr_alloc(). On the + * other hand, swr_alloc() can use swr_alloc_set_opts2() to set the parameters + * on the allocated context. + * + * @param ps Pointer to an existing Swr context if available, or to NULL if not. + * On success, *ps will be set to the allocated context. + * @param out_ch_layout output channel layout (e.g. AV_CHANNEL_LAYOUT_*) + * @param out_sample_fmt output sample format (AV_SAMPLE_FMT_*). + * @param out_sample_rate output sample rate (frequency in Hz) + * @param in_ch_layout input channel layout (e.g. AV_CHANNEL_LAYOUT_*) + * @param in_sample_fmt input sample format (AV_SAMPLE_FMT_*). + * @param in_sample_rate input sample rate (frequency in Hz) + * @param log_offset logging level offset + * @param log_ctx parent logging context, can be NULL + * + * @see swr_init(), swr_free() + * @return 0 on success, a negative AVERROR code on error. + * On error, the Swr context is freed and *ps set to NULL. + */ +int swr_alloc_set_opts2(struct SwrContext **ps, + const AVChannelLayout *out_ch_layout, enum AVSampleFormat out_sample_fmt, int out_sample_rate, + const AVChannelLayout *in_ch_layout, enum AVSampleFormat in_sample_fmt, int in_sample_rate, + int log_offset, void *log_ctx); +/** + * @} + * + * @name SwrContext destructor functions + * @{ + */ + +/** + * Free the given SwrContext and set the pointer to NULL. + * + * @param[in] s a pointer to a pointer to Swr context + */ +void swr_free(struct SwrContext **s); + +/** + * Closes the context so that swr_is_initialized() returns 0. + * + * The context can be brought back to life by running swr_init(), + * swr_init() can also be used without swr_close(). + * This function is mainly provided for simplifying the usecase + * where one tries to support libavresample and libswresample. + * + * @param[in,out] s Swr context to be closed + */ +void swr_close(struct SwrContext *s); + +/** + * @} + * + * @name Core conversion functions + * @{ + */ + +/** Convert audio. + * + * in and in_count can be set to 0 to flush the last few samples out at the + * end. + * + * If more input is provided than output space, then the input will be buffered. + * You can avoid this buffering by using swr_get_out_samples() to retrieve an + * upper bound on the required number of output samples for the given number of + * input samples. Conversion will run directly without copying whenever possible. + * + * @param s allocated Swr context, with parameters set + * @param out output buffers, only the first one need be set in case of packed audio + * @param out_count amount of space available for output in samples per channel + * @param in input buffers, only the first one need to be set in case of packed audio + * @param in_count number of input samples available in one channel + * + * @return number of samples output per channel, negative value on error + */ +int swr_convert(struct SwrContext *s, uint8_t **out, int out_count, + const uint8_t **in , int in_count); + +/** + * Convert the next timestamp from input to output + * timestamps are in 1/(in_sample_rate * out_sample_rate) units. + * + * @note There are 2 slightly differently behaving modes. + * @li When automatic timestamp compensation is not used, (min_compensation >= FLT_MAX) + * in this case timestamps will be passed through with delays compensated + * @li When automatic timestamp compensation is used, (min_compensation < FLT_MAX) + * in this case the output timestamps will match output sample numbers. + * See ffmpeg-resampler(1) for the two modes of compensation. + * + * @param[in] s initialized Swr context + * @param[in] pts timestamp for the next input sample, INT64_MIN if unknown + * @see swr_set_compensation(), swr_drop_output(), and swr_inject_silence() are + * function used internally for timestamp compensation. + * @return the output timestamp for the next output sample + */ +int64_t swr_next_pts(struct SwrContext *s, int64_t pts); + +/** + * @} + * + * @name Low-level option setting functions + * These functons provide a means to set low-level options that is not possible + * with the AVOption API. + * @{ + */ + +/** + * Activate resampling compensation ("soft" compensation). This function is + * internally called when needed in swr_next_pts(). + * + * @param[in,out] s allocated Swr context. If it is not initialized, + * or SWR_FLAG_RESAMPLE is not set, swr_init() is + * called with the flag set. + * @param[in] sample_delta delta in PTS per sample + * @param[in] compensation_distance number of samples to compensate for + * @return >= 0 on success, AVERROR error codes if: + * @li @c s is NULL, + * @li @c compensation_distance is less than 0, + * @li @c compensation_distance is 0 but sample_delta is not, + * @li compensation unsupported by resampler, or + * @li swr_init() fails when called. + */ +int swr_set_compensation(struct SwrContext *s, int sample_delta, int compensation_distance); + +/** + * Set a customized input channel mapping. + * + * @param[in,out] s allocated Swr context, not yet initialized + * @param[in] channel_map customized input channel mapping (array of channel + * indexes, -1 for a muted channel) + * @return >= 0 on success, or AVERROR error code in case of failure. + */ +int swr_set_channel_mapping(struct SwrContext *s, const int *channel_map); + +#if FF_API_OLD_CHANNEL_LAYOUT +/** + * Generate a channel mixing matrix. + * + * This function is the one used internally by libswresample for building the + * default mixing matrix. It is made public just as a utility function for + * building custom matrices. + * + * @param in_layout input channel layout + * @param out_layout output channel layout + * @param center_mix_level mix level for the center channel + * @param surround_mix_level mix level for the surround channel(s) + * @param lfe_mix_level mix level for the low-frequency effects channel + * @param rematrix_maxval if 1.0, coefficients will be normalized to prevent + * overflow. if INT_MAX, coefficients will not be + * normalized. + * @param[out] matrix mixing coefficients; matrix[i + stride * o] is + * the weight of input channel i in output channel o. + * @param stride distance between adjacent input channels in the + * matrix array + * @param matrix_encoding matrixed stereo downmix mode (e.g. dplii) + * @param log_ctx parent logging context, can be NULL + * @return 0 on success, negative AVERROR code on failure + * @deprecated use @ref swr_build_matrix2() + */ +attribute_deprecated +int swr_build_matrix(uint64_t in_layout, uint64_t out_layout, + double center_mix_level, double surround_mix_level, + double lfe_mix_level, double rematrix_maxval, + double rematrix_volume, double *matrix, + int stride, enum AVMatrixEncoding matrix_encoding, + void *log_ctx); +#endif + +/** + * Generate a channel mixing matrix. + * + * This function is the one used internally by libswresample for building the + * default mixing matrix. It is made public just as a utility function for + * building custom matrices. + * + * @param in_layout input channel layout + * @param out_layout output channel layout + * @param center_mix_level mix level for the center channel + * @param surround_mix_level mix level for the surround channel(s) + * @param lfe_mix_level mix level for the low-frequency effects channel + * @param rematrix_maxval if 1.0, coefficients will be normalized to prevent + * overflow. if INT_MAX, coefficients will not be + * normalized. + * @param[out] matrix mixing coefficients; matrix[i + stride * o] is + * the weight of input channel i in output channel o. + * @param stride distance between adjacent input channels in the + * matrix array + * @param matrix_encoding matrixed stereo downmix mode (e.g. dplii) + * @param log_ctx parent logging context, can be NULL + * @return 0 on success, negative AVERROR code on failure + */ +int swr_build_matrix2(const AVChannelLayout *in_layout, const AVChannelLayout *out_layout, + double center_mix_level, double surround_mix_level, + double lfe_mix_level, double maxval, + double rematrix_volume, double *matrix, + ptrdiff_t stride, enum AVMatrixEncoding matrix_encoding, + void *log_context); + +/** + * Set a customized remix matrix. + * + * @param s allocated Swr context, not yet initialized + * @param matrix remix coefficients; matrix[i + stride * o] is + * the weight of input channel i in output channel o + * @param stride offset between lines of the matrix + * @return >= 0 on success, or AVERROR error code in case of failure. + */ +int swr_set_matrix(struct SwrContext *s, const double *matrix, int stride); + +/** + * @} + * + * @name Sample handling functions + * @{ + */ + +/** + * Drops the specified number of output samples. + * + * This function, along with swr_inject_silence(), is called by swr_next_pts() + * if needed for "hard" compensation. + * + * @param s allocated Swr context + * @param count number of samples to be dropped + * + * @return >= 0 on success, or a negative AVERROR code on failure + */ +int swr_drop_output(struct SwrContext *s, int count); + +/** + * Injects the specified number of silence samples. + * + * This function, along with swr_drop_output(), is called by swr_next_pts() + * if needed for "hard" compensation. + * + * @param s allocated Swr context + * @param count number of samples to be dropped + * + * @return >= 0 on success, or a negative AVERROR code on failure + */ +int swr_inject_silence(struct SwrContext *s, int count); + +/** + * Gets the delay the next input sample will experience relative to the next output sample. + * + * Swresample can buffer data if more input has been provided than available + * output space, also converting between sample rates needs a delay. + * This function returns the sum of all such delays. + * The exact delay is not necessarily an integer value in either input or + * output sample rate. Especially when downsampling by a large value, the + * output sample rate may be a poor choice to represent the delay, similarly + * for upsampling and the input sample rate. + * + * @param s swr context + * @param base timebase in which the returned delay will be: + * @li if it's set to 1 the returned delay is in seconds + * @li if it's set to 1000 the returned delay is in milliseconds + * @li if it's set to the input sample rate then the returned + * delay is in input samples + * @li if it's set to the output sample rate then the returned + * delay is in output samples + * @li if it's the least common multiple of in_sample_rate and + * out_sample_rate then an exact rounding-free delay will be + * returned + * @returns the delay in 1 / @c base units. + */ +int64_t swr_get_delay(struct SwrContext *s, int64_t base); + +/** + * Find an upper bound on the number of samples that the next swr_convert + * call will output, if called with in_samples of input samples. This + * depends on the internal state, and anything changing the internal state + * (like further swr_convert() calls) will may change the number of samples + * swr_get_out_samples() returns for the same number of input samples. + * + * @param in_samples number of input samples. + * @note any call to swr_inject_silence(), swr_convert(), swr_next_pts() + * or swr_set_compensation() invalidates this limit + * @note it is recommended to pass the correct available buffer size + * to all functions like swr_convert() even if swr_get_out_samples() + * indicates that less would be used. + * @returns an upper bound on the number of samples that the next swr_convert + * will output or a negative value to indicate an error + */ +int swr_get_out_samples(struct SwrContext *s, int in_samples); + +/** + * @} + * + * @name Configuration accessors + * @{ + */ + +/** + * Return the @ref LIBSWRESAMPLE_VERSION_INT constant. + * + * This is useful to check if the build-time libswresample has the same version + * as the run-time one. + * + * @returns the unsigned int-typed version + */ +unsigned swresample_version(void); + +/** + * Return the swr build-time configuration. + * + * @returns the build-time @c ./configure flags + */ +const char *swresample_configuration(void); + +/** + * Return the swr license. + * + * @returns the license of libswresample, determined at build-time + */ +const char *swresample_license(void); + +/** + * @} + * + * @name AVFrame based API + * @{ + */ + +/** + * Convert the samples in the input AVFrame and write them to the output AVFrame. + * + * Input and output AVFrames must have channel_layout, sample_rate and format set. + * + * If the output AVFrame does not have the data pointers allocated the nb_samples + * field will be set using av_frame_get_buffer() + * is called to allocate the frame. + * + * The output AVFrame can be NULL or have fewer allocated samples than required. + * In this case, any remaining samples not written to the output will be added + * to an internal FIFO buffer, to be returned at the next call to this function + * or to swr_convert(). + * + * If converting sample rate, there may be data remaining in the internal + * resampling delay buffer. swr_get_delay() tells the number of + * remaining samples. To get this data as output, call this function or + * swr_convert() with NULL input. + * + * If the SwrContext configuration does not match the output and + * input AVFrame settings the conversion does not take place and depending on + * which AVFrame is not matching AVERROR_OUTPUT_CHANGED, AVERROR_INPUT_CHANGED + * or the result of a bitwise-OR of them is returned. + * + * @see swr_delay() + * @see swr_convert() + * @see swr_get_delay() + * + * @param swr audio resample context + * @param output output AVFrame + * @param input input AVFrame + * @return 0 on success, AVERROR on failure or nonmatching + * configuration. + */ +int swr_convert_frame(SwrContext *swr, + AVFrame *output, const AVFrame *input); + +/** + * Configure or reconfigure the SwrContext using the information + * provided by the AVFrames. + * + * The original resampling context is reset even on failure. + * The function calls swr_close() internally if the context is open. + * + * @see swr_close(); + * + * @param swr audio resample context + * @param out output AVFrame + * @param in input AVFrame + * @return 0 on success, AVERROR on failure. + */ +int swr_config_frame(SwrContext *swr, const AVFrame *out, const AVFrame *in); + +/** + * @} + * @} + */ + +#endif /* SWRESAMPLE_SWRESAMPLE_H */ -- cgit v1.2.3