Fixed crlf issue

1 files changed, 260 insertions, 260 deletions

diff --git a/Samples/OculusRoomTiny/OculusRoomModel.cpp b/Samples/OculusRoomTiny/OculusRoomModel.cpp
index 74e60cf..e12751a 100644
--- a/Samples/OculusRoomTiny/OculusRoomModel.cpp
+++ b/Samples/OculusRoomTiny/OculusRoomModel.cpp
@@ -1,260 +1,260 @@
-/************************************************************************************

-

-Filename    :   OculusRoomModel.cpp

-Content     :   Creates a simple room scene from hard-coded geometry

-Created     :   October 4, 2012

-

-Copyright   :   Copyright 2012-2013 Oculus, Inc. All Rights reserved.

-

-Licensed under the Apache License, Version 2.0 (the "License");

-you may not use this file except in compliance with the License.

-You may obtain a copy of the License at

-

-http://www.apache.org/licenses/LICENSE-2.0

-

-Unless required by applicable law or agreed to in writing, software

-distributed under the License is distributed on an "AS IS" BASIS,

-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-See the License for the specific language governing permissions and

-limitations under the License.

-

-*************************************************************************************/

-

-#include "RenderTiny_Device.h"

-

-using namespace OVR;

-using namespace OVR::RenderTiny;

-

-

-//-------------------------------------------------------------------------------------

-// ***** Room Model

-

-// This model is hard-coded out of axis-aligned solid-colored slabs.

-// Room unit dimensions are in meters. Player starts in the middle.

-//

-

-enum BuiltinTexture

-{

-    Tex_None,

-    Tex_Checker,

-    Tex_Block,

-    Tex_Panel,

-    Tex_Count

-};

-

-struct Slab

-{

-    float x1, y1, z1;

-    float x2, y2, z2;

-    Color c;

-};

-

-struct SlabModel

-{

-    int   Count;

-    Slab* pSlabs;

-    BuiltinTexture tex;

-};

-

-Slab FloorSlabs[] =

-{

-    // Floor

-    { -10.0f,  -0.1f,  -20.0f,  10.0f,  0.0f, 20.1f,  Color(128,128,128) }

-};

-

-SlabModel Floor = {sizeof(FloorSlabs)/sizeof(Slab), FloorSlabs, Tex_Checker};

-

-Slab CeilingSlabs[] =

-{

-    { -10.0f,  4.0f,  -20.0f,  10.0f,  4.1f, 20.1f,  Color(128,128,128) }

-};

-

-SlabModel Ceiling = {sizeof(FloorSlabs)/sizeof(Slab), CeilingSlabs, Tex_Panel};

-

-Slab RoomSlabs[] =

-{

-    // Left Wall

-    { -10.1f,   0.0f,  -20.0f, -10.0f,  4.0f, 20.0f,  Color(128,128,128) },

-    // Back Wall

-    { -10.0f,  -0.1f,  -20.1f,  10.0f,  4.0f, -20.0f, Color(128,128,128) },

-

-    // Right Wall

-    {  10.0f,  -0.1f,  -20.0f,  10.1f,  4.0f, 20.0f,  Color(128,128,128) },

-};

-

-SlabModel Room = {sizeof(RoomSlabs)/sizeof(Slab), RoomSlabs, Tex_Block};

-

-Slab FixtureSlabs[] =

-{

-    // Right side shelf

-    {   9.5f,   0.75f,  3.0f,  10.1f,  2.5f,   3.1f,  Color(128,128,128) }, // Verticals

-    {   9.5f,   0.95f,  3.7f,  10.1f,  2.75f,  3.8f,  Color(128,128,128) },

-    {   9.5f,   1.20f,  2.5f,  10.1f,  1.30f,  3.8f,  Color(128,128,128) }, // Horizontals

-    {   9.5f,   2.00f,  3.0f,  10.1f,  2.10f,  4.2f,  Color(128,128,128) },

-

-    // Right railing    

-    {   5.0f,   1.1f,   20.0f,  10.0f,  1.2f,  20.1f, Color(128,128,128) },

-    // Bars

-    {   9.0f,   1.1f,   20.0f,   9.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {   8.0f,   1.1f,   20.0f,   8.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {   7.0f,   1.1f,   20.0f,   7.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {   6.0f,   1.1f,   20.0f,   6.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {   5.0f,   1.1f,   20.0f,   5.1f,  0.0f,  20.1f, Color(128,128,128) },

-

-    // Left railing    

-    {  -10.0f,   1.1f, 20.0f,   -5.0f,   1.2f, 20.1f, Color(128,128,128) },

-    // Bars

-    {  -9.0f,   1.1f,   20.0f,  -9.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {  -8.0f,   1.1f,   20.0f,  -8.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {  -7.0f,   1.1f,   20.0f,  -7.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {  -6.0f,   1.1f,   20.0f,  -6.1f,  0.0f,  20.1f, Color(128,128,128) },

-    {  -5.0f,   1.1f,   20.0f,  -5.1f,  0.0f,  20.1f, Color(128,128,128) },

-

-    // Bottom Floor 2

-    { -15.0f,  -6.1f,   18.0f,  15.0f, -6.0f, 30.0f,  Color(128,128,128) },

-};

-

-SlabModel Fixtures = {sizeof(FixtureSlabs)/sizeof(Slab), FixtureSlabs};

-

-Slab FurnitureSlabs[] =

-{

-    // Table

-    {  -1.8f, 0.7f, 1.0f,  0.0f,      0.8f, 0.0f,      Color(128,128,88) },

-    {  -1.8f, 0.7f, 0.0f, -1.8f+0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 1

-    {  -1.8f, 0.7f, 1.0f, -1.8f+0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2

-    {   0.0f, 0.7f, 1.0f,  0.0f-0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2

-    {   0.0f, 0.7f, 0.0f,  0.0f-0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 2

-

-    // Chair

-    {  -1.4f, 0.5f, -1.1f, -0.8f,       0.55f, -0.5f,       Color(88,88,128) }, // Set

-    {  -1.4f, 1.0f, -1.1f, -1.4f+0.06f, 0.0f,  -1.1f+0.06f, Color(88,88,128) }, // Leg 1

-    {  -1.4f, 0.5f, -0.5f, -1.4f+0.06f, 0.0f,  -0.5f-0.06f, Color(88,88,128) }, // Leg 2

-    {  -0.8f, 0.5f, -0.5f, -0.8f-0.06f, 0.0f,  -0.5f-0.06f, Color(88,88,128) }, // Leg 2

-    {  -0.8f, 1.0f, -1.1f, -0.8f-0.06f, 0.0f,  -1.1f+0.06f, Color(88,88,128) }, // Leg 2

-    {  -1.4f, 0.97f,-1.05f,-0.8f,       0.92f, -1.10f,      Color(88,88,128) }, // Back high bar

-};

-

-SlabModel Furniture = {sizeof(FurnitureSlabs)/sizeof(Slab), FurnitureSlabs};

-

-Slab PostsSlabs[] = 

-{

-    // Posts

-    {  0,  0.0f, 0.0f,   0.1f, 1.3f, 0.1f, Color(128,128,128) },

-    {  0,  0.0f, 0.4f,   0.1f, 1.3f, 0.5f, Color(128,128,128) },

-    {  0,  0.0f, 0.8f,   0.1f, 1.3f, 0.9f, Color(128,128,128) },

-    {  0,  0.0f, 1.2f,   0.1f, 1.3f, 1.3f, Color(128,128,128) },

-    {  0,  0.0f, 1.6f,   0.1f, 1.3f, 1.7f, Color(128,128,128) },

-    {  0,  0.0f, 2.0f,   0.1f, 1.3f, 2.1f, Color(128,128,128) },

-    {  0,  0.0f, 2.4f,   0.1f, 1.3f, 2.5f, Color(128,128,128) },

-    {  0,  0.0f, 2.8f,   0.1f, 1.3f, 2.9f, Color(128,128,128) },

-    {  0,  0.0f, 3.2f,   0.1f, 1.3f, 3.3f, Color(128,128,128) },

-    {  0,  0.0f, 3.6f,   0.1f, 1.3f, 3.7f, Color(128,128,128) },

-};

-

-SlabModel Posts = {sizeof(PostsSlabs)/sizeof(Slab), PostsSlabs};

-

-

-// Temporary helper class used to initialize fills used by model. 

-class FillCollection

-{

-public:

-    Ptr<ShaderFill> LitSolid;

-    Ptr<ShaderFill> LitTextures[4];

-

-    FillCollection(RenderDevice* render);

-  

-};

-

-FillCollection::FillCollection(RenderDevice* render)

-{

-    Ptr<Texture> builtinTextures[Tex_Count];

-

-    // Create floor checkerboard texture.

-    {

-        Color checker[256*256];

-        for (int j = 0; j < 256; j++)

-            for (int i = 0; i < 256; i++)

-                checker[j*256+i] = (((i/4 >> 5) ^ (j/4 >> 5)) & 1) ?

-                Color(180,180,180,255) : Color(80,80,80,255);

-        builtinTextures[Tex_Checker] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, checker);

-        builtinTextures[Tex_Checker]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);

-    }

-

-    // Ceiling panel texture.

-    {

-        Color panel[256*256];

-        for (int j = 0; j < 256; j++)

-            for (int i = 0; i < 256; i++)

-                panel[j*256+i] = (i/4 == 0 || j/4 == 0) ?

-                Color(80,80,80,255) : Color(180,180,180,255);

-        builtinTextures[Tex_Panel] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, panel);

-        builtinTextures[Tex_Panel]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);

-    }

-

-    // Wall brick textures.

-    {

-        Color block[256*256];

-        for (int j = 0; j < 256; j++)

-            for (int i = 0; i < 256; i++)

-                block[j*256+i] = (((j/4 & 15) == 0) || (((i/4 & 15) == 0) && ((((i/4 & 31) == 0) ^ ((j/4 >> 4) & 1)) == 0))) ?

-                Color(60,60,60,255) : Color(180,180,180,255);

-        builtinTextures[Tex_Block] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, block);

-        builtinTextures[Tex_Block]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);

-    }

-

-    LitSolid = *new ShaderFill(*render->CreateShaderSet());

-    LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP)); 

-    LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitGouraud)); 

-

-    for (int i = 1; i < Tex_Count; i++)

-    {

-        LitTextures[i] = *new ShaderFill(*render->CreateShaderSet());

-        LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP)); 

-        LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitTexture)); 

-        LitTextures[i]->SetTexture(0, builtinTextures[i]);

-    }

-

-}

-

-

-

-// Helper function to create a model out of Slab arrays.

-Model* CreateModel(Vector3f pos, SlabModel* sm, const FillCollection& fills)

-{

-    Model* m = new Model(Prim_Triangles);

-    m->SetPosition(pos);

-

-    for(int i=0; i< sm->Count; i++)

-    {

-        Slab &s = sm->pSlabs[i];

-        m->AddSolidColorBox(s.x1, s.y1, s.z1, s.x2, s.y2, s.z2, s.c);

-    }

-

-    if (sm->tex > 0)

-        m->Fill = fills.LitTextures[sm->tex];

-    else

-        m->Fill = fills.LitSolid;

-    return m;

-}

-

-

-// Adds sample models and lights to the argument scene.

-void PopulateRoomScene(Scene* scene, RenderDevice* render)

-{

-    FillCollection fills(render);  

-

-    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Room,       fills)));

-    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Floor,      fills)));

-    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Ceiling,    fills)));

-    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Fixtures,   fills)));

-    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Furniture,  fills)));

-    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,4),  &Furniture,  fills)));

-    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(-3,0,3), &Posts,      fills)));

-  

-

-    scene->SetAmbient(Vector4f(0.65f,0.65f,0.65f,1));

-    scene->AddLight(Vector3f(-2,4,-2), Vector4f(8,8,8,1));

-    scene->AddLight(Vector3f(3,4,-3),  Vector4f(2,1,1,1));

-    scene->AddLight(Vector3f(-4,3,25), Vector4f(3,6,3,1));

-}

-

+/************************************************************************************
+
+Filename    :   OculusRoomModel.cpp
+Content     :   Creates a simple room scene from hard-coded geometry
+Created     :   October 4, 2012
+
+Copyright   :   Copyright 2012-2013 Oculus, Inc. All Rights reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+*************************************************************************************/
+
+#include "RenderTiny_Device.h"
+
+using namespace OVR;
+using namespace OVR::RenderTiny;
+
+
+//-------------------------------------------------------------------------------------
+// ***** Room Model
+
+// This model is hard-coded out of axis-aligned solid-colored slabs.
+// Room unit dimensions are in meters. Player starts in the middle.
+//
+
+enum BuiltinTexture
+{
+    Tex_None,
+    Tex_Checker,
+    Tex_Block,
+    Tex_Panel,
+    Tex_Count
+};
+
+struct Slab
+{
+    float x1, y1, z1;
+    float x2, y2, z2;
+    Color c;
+};
+
+struct SlabModel
+{
+    int   Count;
+    Slab* pSlabs;
+    BuiltinTexture tex;
+};
+
+Slab FloorSlabs[] =
+{
+    // Floor
+    { -10.0f,  -0.1f,  -20.0f,  10.0f,  0.0f, 20.1f,  Color(128,128,128) }
+};
+
+SlabModel Floor = {sizeof(FloorSlabs)/sizeof(Slab), FloorSlabs, Tex_Checker};
+
+Slab CeilingSlabs[] =
+{
+    { -10.0f,  4.0f,  -20.0f,  10.0f,  4.1f, 20.1f,  Color(128,128,128) }
+};
+
+SlabModel Ceiling = {sizeof(FloorSlabs)/sizeof(Slab), CeilingSlabs, Tex_Panel};
+
+Slab RoomSlabs[] =
+{
+    // Left Wall
+    { -10.1f,   0.0f,  -20.0f, -10.0f,  4.0f, 20.0f,  Color(128,128,128) },
+    // Back Wall
+    { -10.0f,  -0.1f,  -20.1f,  10.0f,  4.0f, -20.0f, Color(128,128,128) },
+
+    // Right Wall
+    {  10.0f,  -0.1f,  -20.0f,  10.1f,  4.0f, 20.0f,  Color(128,128,128) },
+};
+
+SlabModel Room = {sizeof(RoomSlabs)/sizeof(Slab), RoomSlabs, Tex_Block};
+
+Slab FixtureSlabs[] =
+{
+    // Right side shelf
+    {   9.5f,   0.75f,  3.0f,  10.1f,  2.5f,   3.1f,  Color(128,128,128) }, // Verticals
+    {   9.5f,   0.95f,  3.7f,  10.1f,  2.75f,  3.8f,  Color(128,128,128) },
+    {   9.5f,   1.20f,  2.5f,  10.1f,  1.30f,  3.8f,  Color(128,128,128) }, // Horizontals
+    {   9.5f,   2.00f,  3.0f,  10.1f,  2.10f,  4.2f,  Color(128,128,128) },
+
+    // Right railing    
+    {   5.0f,   1.1f,   20.0f,  10.0f,  1.2f,  20.1f, Color(128,128,128) },
+    // Bars
+    {   9.0f,   1.1f,   20.0f,   9.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {   8.0f,   1.1f,   20.0f,   8.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {   7.0f,   1.1f,   20.0f,   7.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {   6.0f,   1.1f,   20.0f,   6.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {   5.0f,   1.1f,   20.0f,   5.1f,  0.0f,  20.1f, Color(128,128,128) },
+
+    // Left railing    
+    {  -10.0f,   1.1f, 20.0f,   -5.0f,   1.2f, 20.1f, Color(128,128,128) },
+    // Bars
+    {  -9.0f,   1.1f,   20.0f,  -9.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {  -8.0f,   1.1f,   20.0f,  -8.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {  -7.0f,   1.1f,   20.0f,  -7.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {  -6.0f,   1.1f,   20.0f,  -6.1f,  0.0f,  20.1f, Color(128,128,128) },
+    {  -5.0f,   1.1f,   20.0f,  -5.1f,  0.0f,  20.1f, Color(128,128,128) },
+
+    // Bottom Floor 2
+    { -15.0f,  -6.1f,   18.0f,  15.0f, -6.0f, 30.0f,  Color(128,128,128) },
+};
+
+SlabModel Fixtures = {sizeof(FixtureSlabs)/sizeof(Slab), FixtureSlabs};
+
+Slab FurnitureSlabs[] =
+{
+    // Table
+    {  -1.8f, 0.7f, 1.0f,  0.0f,      0.8f, 0.0f,      Color(128,128,88) },
+    {  -1.8f, 0.7f, 0.0f, -1.8f+0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 1
+    {  -1.8f, 0.7f, 1.0f, -1.8f+0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2
+    {   0.0f, 0.7f, 1.0f,  0.0f-0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2
+    {   0.0f, 0.7f, 0.0f,  0.0f-0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 2
+
+    // Chair
+    {  -1.4f, 0.5f, -1.1f, -0.8f,       0.55f, -0.5f,       Color(88,88,128) }, // Set
+    {  -1.4f, 1.0f, -1.1f, -1.4f+0.06f, 0.0f,  -1.1f+0.06f, Color(88,88,128) }, // Leg 1
+    {  -1.4f, 0.5f, -0.5f, -1.4f+0.06f, 0.0f,  -0.5f-0.06f, Color(88,88,128) }, // Leg 2
+    {  -0.8f, 0.5f, -0.5f, -0.8f-0.06f, 0.0f,  -0.5f-0.06f, Color(88,88,128) }, // Leg 2
+    {  -0.8f, 1.0f, -1.1f, -0.8f-0.06f, 0.0f,  -1.1f+0.06f, Color(88,88,128) }, // Leg 2
+    {  -1.4f, 0.97f,-1.05f,-0.8f,       0.92f, -1.10f,      Color(88,88,128) }, // Back high bar
+};
+
+SlabModel Furniture = {sizeof(FurnitureSlabs)/sizeof(Slab), FurnitureSlabs};
+
+Slab PostsSlabs[] = 
+{
+    // Posts
+    {  0,  0.0f, 0.0f,   0.1f, 1.3f, 0.1f, Color(128,128,128) },
+    {  0,  0.0f, 0.4f,   0.1f, 1.3f, 0.5f, Color(128,128,128) },
+    {  0,  0.0f, 0.8f,   0.1f, 1.3f, 0.9f, Color(128,128,128) },
+    {  0,  0.0f, 1.2f,   0.1f, 1.3f, 1.3f, Color(128,128,128) },
+    {  0,  0.0f, 1.6f,   0.1f, 1.3f, 1.7f, Color(128,128,128) },
+    {  0,  0.0f, 2.0f,   0.1f, 1.3f, 2.1f, Color(128,128,128) },
+    {  0,  0.0f, 2.4f,   0.1f, 1.3f, 2.5f, Color(128,128,128) },
+    {  0,  0.0f, 2.8f,   0.1f, 1.3f, 2.9f, Color(128,128,128) },
+    {  0,  0.0f, 3.2f,   0.1f, 1.3f, 3.3f, Color(128,128,128) },
+    {  0,  0.0f, 3.6f,   0.1f, 1.3f, 3.7f, Color(128,128,128) },
+};
+
+SlabModel Posts = {sizeof(PostsSlabs)/sizeof(Slab), PostsSlabs};
+
+
+// Temporary helper class used to initialize fills used by model. 
+class FillCollection
+{
+public:
+    Ptr<ShaderFill> LitSolid;
+    Ptr<ShaderFill> LitTextures[4];
+
+    FillCollection(RenderDevice* render);
+  
+};
+
+FillCollection::FillCollection(RenderDevice* render)
+{
+    Ptr<Texture> builtinTextures[Tex_Count];
+
+    // Create floor checkerboard texture.
+    {
+        Color checker[256*256];
+        for (int j = 0; j < 256; j++)
+            for (int i = 0; i < 256; i++)
+                checker[j*256+i] = (((i/4 >> 5) ^ (j/4 >> 5)) & 1) ?
+                Color(180,180,180,255) : Color(80,80,80,255);
+        builtinTextures[Tex_Checker] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, checker);
+        builtinTextures[Tex_Checker]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);
+    }
+
+    // Ceiling panel texture.
+    {
+        Color panel[256*256];
+        for (int j = 0; j < 256; j++)
+            for (int i = 0; i < 256; i++)
+                panel[j*256+i] = (i/4 == 0 || j/4 == 0) ?
+                Color(80,80,80,255) : Color(180,180,180,255);
+        builtinTextures[Tex_Panel] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, panel);
+        builtinTextures[Tex_Panel]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);
+    }
+
+    // Wall brick textures.
+    {
+        Color block[256*256];
+        for (int j = 0; j < 256; j++)
+            for (int i = 0; i < 256; i++)
+                block[j*256+i] = (((j/4 & 15) == 0) || (((i/4 & 15) == 0) && ((((i/4 & 31) == 0) ^ ((j/4 >> 4) & 1)) == 0))) ?
+                Color(60,60,60,255) : Color(180,180,180,255);
+        builtinTextures[Tex_Block] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, block);
+        builtinTextures[Tex_Block]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);
+    }
+
+    LitSolid = *new ShaderFill(*render->CreateShaderSet());
+    LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP)); 
+    LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitGouraud)); 
+
+    for (int i = 1; i < Tex_Count; i++)
+    {
+        LitTextures[i] = *new ShaderFill(*render->CreateShaderSet());
+        LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP)); 
+        LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitTexture)); 
+        LitTextures[i]->SetTexture(0, builtinTextures[i]);
+    }
+
+}
+
+
+
+// Helper function to create a model out of Slab arrays.
+Model* CreateModel(Vector3f pos, SlabModel* sm, const FillCollection& fills)
+{
+    Model* m = new Model(Prim_Triangles);
+    m->SetPosition(pos);
+
+    for(int i=0; i< sm->Count; i++)
+    {
+        Slab &s = sm->pSlabs[i];
+        m->AddSolidColorBox(s.x1, s.y1, s.z1, s.x2, s.y2, s.z2, s.c);
+    }
+
+    if (sm->tex > 0)
+        m->Fill = fills.LitTextures[sm->tex];
+    else
+        m->Fill = fills.LitSolid;
+    return m;
+}
+
+
+// Adds sample models and lights to the argument scene.
+void PopulateRoomScene(Scene* scene, RenderDevice* render)
+{
+    FillCollection fills(render);  
+
+    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Room,       fills)));
+    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Floor,      fills)));
+    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Ceiling,    fills)));
+    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Fixtures,   fills)));
+    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0),  &Furniture,  fills)));
+    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,4),  &Furniture,  fills)));
+    scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(-3,0,3), &Posts,      fills)));
+  
+
+    scene->SetAmbient(Vector4f(0.65f,0.65f,0.65f,1));
+    scene->AddLight(Vector3f(-2,4,-2), Vector4f(8,8,8,1));
+    scene->AddLight(Vector3f(3,4,-3),  Vector4f(2,1,1,1));
+    scene->AddLight(Vector3f(-4,3,25), Vector4f(3,6,3,1));
+}
+