diff options
Diffstat (limited to 'Samples/OculusRoomTiny/OculusRoomModel.cpp')
| -rw-r--r-- | Samples/OculusRoomTiny/OculusRoomModel.cpp | 520 |
1 files changed, 260 insertions, 260 deletions
diff --git a/Samples/OculusRoomTiny/OculusRoomModel.cpp b/Samples/OculusRoomTiny/OculusRoomModel.cpp index 74e60cf..e12751a 100644 --- a/Samples/OculusRoomTiny/OculusRoomModel.cpp +++ b/Samples/OculusRoomTiny/OculusRoomModel.cpp @@ -1,260 +1,260 @@ -/************************************************************************************
-
-Filename : OculusRoomModel.cpp
-Content : Creates a simple room scene from hard-coded geometry
-Created : October 4, 2012
-
-Copyright : Copyright 2012-2013 Oculus, Inc. All Rights reserved.
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-
-*************************************************************************************/
-
-#include "RenderTiny_Device.h"
-
-using namespace OVR;
-using namespace OVR::RenderTiny;
-
-
-//-------------------------------------------------------------------------------------
-// ***** Room Model
-
-// This model is hard-coded out of axis-aligned solid-colored slabs.
-// Room unit dimensions are in meters. Player starts in the middle.
-//
-
-enum BuiltinTexture
-{
- Tex_None,
- Tex_Checker,
- Tex_Block,
- Tex_Panel,
- Tex_Count
-};
-
-struct Slab
-{
- float x1, y1, z1;
- float x2, y2, z2;
- Color c;
-};
-
-struct SlabModel
-{
- int Count;
- Slab* pSlabs;
- BuiltinTexture tex;
-};
-
-Slab FloorSlabs[] =
-{
- // Floor
- { -10.0f, -0.1f, -20.0f, 10.0f, 0.0f, 20.1f, Color(128,128,128) }
-};
-
-SlabModel Floor = {sizeof(FloorSlabs)/sizeof(Slab), FloorSlabs, Tex_Checker};
-
-Slab CeilingSlabs[] =
-{
- { -10.0f, 4.0f, -20.0f, 10.0f, 4.1f, 20.1f, Color(128,128,128) }
-};
-
-SlabModel Ceiling = {sizeof(FloorSlabs)/sizeof(Slab), CeilingSlabs, Tex_Panel};
-
-Slab RoomSlabs[] =
-{
- // Left Wall
- { -10.1f, 0.0f, -20.0f, -10.0f, 4.0f, 20.0f, Color(128,128,128) },
- // Back Wall
- { -10.0f, -0.1f, -20.1f, 10.0f, 4.0f, -20.0f, Color(128,128,128) },
-
- // Right Wall
- { 10.0f, -0.1f, -20.0f, 10.1f, 4.0f, 20.0f, Color(128,128,128) },
-};
-
-SlabModel Room = {sizeof(RoomSlabs)/sizeof(Slab), RoomSlabs, Tex_Block};
-
-Slab FixtureSlabs[] =
-{
- // Right side shelf
- { 9.5f, 0.75f, 3.0f, 10.1f, 2.5f, 3.1f, Color(128,128,128) }, // Verticals
- { 9.5f, 0.95f, 3.7f, 10.1f, 2.75f, 3.8f, Color(128,128,128) },
- { 9.5f, 1.20f, 2.5f, 10.1f, 1.30f, 3.8f, Color(128,128,128) }, // Horizontals
- { 9.5f, 2.00f, 3.0f, 10.1f, 2.10f, 4.2f, Color(128,128,128) },
-
- // Right railing
- { 5.0f, 1.1f, 20.0f, 10.0f, 1.2f, 20.1f, Color(128,128,128) },
- // Bars
- { 9.0f, 1.1f, 20.0f, 9.1f, 0.0f, 20.1f, Color(128,128,128) },
- { 8.0f, 1.1f, 20.0f, 8.1f, 0.0f, 20.1f, Color(128,128,128) },
- { 7.0f, 1.1f, 20.0f, 7.1f, 0.0f, 20.1f, Color(128,128,128) },
- { 6.0f, 1.1f, 20.0f, 6.1f, 0.0f, 20.1f, Color(128,128,128) },
- { 5.0f, 1.1f, 20.0f, 5.1f, 0.0f, 20.1f, Color(128,128,128) },
-
- // Left railing
- { -10.0f, 1.1f, 20.0f, -5.0f, 1.2f, 20.1f, Color(128,128,128) },
- // Bars
- { -9.0f, 1.1f, 20.0f, -9.1f, 0.0f, 20.1f, Color(128,128,128) },
- { -8.0f, 1.1f, 20.0f, -8.1f, 0.0f, 20.1f, Color(128,128,128) },
- { -7.0f, 1.1f, 20.0f, -7.1f, 0.0f, 20.1f, Color(128,128,128) },
- { -6.0f, 1.1f, 20.0f, -6.1f, 0.0f, 20.1f, Color(128,128,128) },
- { -5.0f, 1.1f, 20.0f, -5.1f, 0.0f, 20.1f, Color(128,128,128) },
-
- // Bottom Floor 2
- { -15.0f, -6.1f, 18.0f, 15.0f, -6.0f, 30.0f, Color(128,128,128) },
-};
-
-SlabModel Fixtures = {sizeof(FixtureSlabs)/sizeof(Slab), FixtureSlabs};
-
-Slab FurnitureSlabs[] =
-{
- // Table
- { -1.8f, 0.7f, 1.0f, 0.0f, 0.8f, 0.0f, Color(128,128,88) },
- { -1.8f, 0.7f, 0.0f, -1.8f+0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 1
- { -1.8f, 0.7f, 1.0f, -1.8f+0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2
- { 0.0f, 0.7f, 1.0f, 0.0f-0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2
- { 0.0f, 0.7f, 0.0f, 0.0f-0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 2
-
- // Chair
- { -1.4f, 0.5f, -1.1f, -0.8f, 0.55f, -0.5f, Color(88,88,128) }, // Set
- { -1.4f, 1.0f, -1.1f, -1.4f+0.06f, 0.0f, -1.1f+0.06f, Color(88,88,128) }, // Leg 1
- { -1.4f, 0.5f, -0.5f, -1.4f+0.06f, 0.0f, -0.5f-0.06f, Color(88,88,128) }, // Leg 2
- { -0.8f, 0.5f, -0.5f, -0.8f-0.06f, 0.0f, -0.5f-0.06f, Color(88,88,128) }, // Leg 2
- { -0.8f, 1.0f, -1.1f, -0.8f-0.06f, 0.0f, -1.1f+0.06f, Color(88,88,128) }, // Leg 2
- { -1.4f, 0.97f,-1.05f,-0.8f, 0.92f, -1.10f, Color(88,88,128) }, // Back high bar
-};
-
-SlabModel Furniture = {sizeof(FurnitureSlabs)/sizeof(Slab), FurnitureSlabs};
-
-Slab PostsSlabs[] =
-{
- // Posts
- { 0, 0.0f, 0.0f, 0.1f, 1.3f, 0.1f, Color(128,128,128) },
- { 0, 0.0f, 0.4f, 0.1f, 1.3f, 0.5f, Color(128,128,128) },
- { 0, 0.0f, 0.8f, 0.1f, 1.3f, 0.9f, Color(128,128,128) },
- { 0, 0.0f, 1.2f, 0.1f, 1.3f, 1.3f, Color(128,128,128) },
- { 0, 0.0f, 1.6f, 0.1f, 1.3f, 1.7f, Color(128,128,128) },
- { 0, 0.0f, 2.0f, 0.1f, 1.3f, 2.1f, Color(128,128,128) },
- { 0, 0.0f, 2.4f, 0.1f, 1.3f, 2.5f, Color(128,128,128) },
- { 0, 0.0f, 2.8f, 0.1f, 1.3f, 2.9f, Color(128,128,128) },
- { 0, 0.0f, 3.2f, 0.1f, 1.3f, 3.3f, Color(128,128,128) },
- { 0, 0.0f, 3.6f, 0.1f, 1.3f, 3.7f, Color(128,128,128) },
-};
-
-SlabModel Posts = {sizeof(PostsSlabs)/sizeof(Slab), PostsSlabs};
-
-
-// Temporary helper class used to initialize fills used by model.
-class FillCollection
-{
-public:
- Ptr<ShaderFill> LitSolid;
- Ptr<ShaderFill> LitTextures[4];
-
- FillCollection(RenderDevice* render);
-
-};
-
-FillCollection::FillCollection(RenderDevice* render)
-{
- Ptr<Texture> builtinTextures[Tex_Count];
-
- // Create floor checkerboard texture.
- {
- Color checker[256*256];
- for (int j = 0; j < 256; j++)
- for (int i = 0; i < 256; i++)
- checker[j*256+i] = (((i/4 >> 5) ^ (j/4 >> 5)) & 1) ?
- Color(180,180,180,255) : Color(80,80,80,255);
- builtinTextures[Tex_Checker] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, checker);
- builtinTextures[Tex_Checker]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);
- }
-
- // Ceiling panel texture.
- {
- Color panel[256*256];
- for (int j = 0; j < 256; j++)
- for (int i = 0; i < 256; i++)
- panel[j*256+i] = (i/4 == 0 || j/4 == 0) ?
- Color(80,80,80,255) : Color(180,180,180,255);
- builtinTextures[Tex_Panel] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, panel);
- builtinTextures[Tex_Panel]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);
- }
-
- // Wall brick textures.
- {
- Color block[256*256];
- for (int j = 0; j < 256; j++)
- for (int i = 0; i < 256; i++)
- block[j*256+i] = (((j/4 & 15) == 0) || (((i/4 & 15) == 0) && ((((i/4 & 31) == 0) ^ ((j/4 >> 4) & 1)) == 0))) ?
- Color(60,60,60,255) : Color(180,180,180,255);
- builtinTextures[Tex_Block] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, block);
- builtinTextures[Tex_Block]->SetSampleMode(Sample_Anisotropic|Sample_Repeat);
- }
-
- LitSolid = *new ShaderFill(*render->CreateShaderSet());
- LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP));
- LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitGouraud));
-
- for (int i = 1; i < Tex_Count; i++)
- {
- LitTextures[i] = *new ShaderFill(*render->CreateShaderSet());
- LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP));
- LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitTexture));
- LitTextures[i]->SetTexture(0, builtinTextures[i]);
- }
-
-}
-
-
-
-// Helper function to create a model out of Slab arrays.
-Model* CreateModel(Vector3f pos, SlabModel* sm, const FillCollection& fills)
-{
- Model* m = new Model(Prim_Triangles);
- m->SetPosition(pos);
-
- for(int i=0; i< sm->Count; i++)
- {
- Slab &s = sm->pSlabs[i];
- m->AddSolidColorBox(s.x1, s.y1, s.z1, s.x2, s.y2, s.z2, s.c);
- }
-
- if (sm->tex > 0)
- m->Fill = fills.LitTextures[sm->tex];
- else
- m->Fill = fills.LitSolid;
- return m;
-}
-
-
-// Adds sample models and lights to the argument scene.
-void PopulateRoomScene(Scene* scene, RenderDevice* render)
-{
- FillCollection fills(render);
-
- scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Room, fills)));
- scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Floor, fills)));
- scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Ceiling, fills)));
- scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Fixtures, fills)));
- scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Furniture, fills)));
- scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,4), &Furniture, fills)));
- scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(-3,0,3), &Posts, fills)));
-
-
- scene->SetAmbient(Vector4f(0.65f,0.65f,0.65f,1));
- scene->AddLight(Vector3f(-2,4,-2), Vector4f(8,8,8,1));
- scene->AddLight(Vector3f(3,4,-3), Vector4f(2,1,1,1));
- scene->AddLight(Vector3f(-4,3,25), Vector4f(3,6,3,1));
-}
-
+/************************************************************************************ + +Filename : OculusRoomModel.cpp +Content : Creates a simple room scene from hard-coded geometry +Created : October 4, 2012 + +Copyright : Copyright 2012-2013 Oculus, Inc. All Rights reserved. + +Licensed under the Apache License, Version 2.0 (the "License"); +you may not use this file except in compliance with the License. +You may obtain a copy of the License at + +http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, software +distributed under the License is distributed on an "AS IS" BASIS, +WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +See the License for the specific language governing permissions and +limitations under the License. + +*************************************************************************************/ + +#include "RenderTiny_Device.h" + +using namespace OVR; +using namespace OVR::RenderTiny; + + +//------------------------------------------------------------------------------------- +// ***** Room Model + +// This model is hard-coded out of axis-aligned solid-colored slabs. +// Room unit dimensions are in meters. Player starts in the middle. +// + +enum BuiltinTexture +{ + Tex_None, + Tex_Checker, + Tex_Block, + Tex_Panel, + Tex_Count +}; + +struct Slab +{ + float x1, y1, z1; + float x2, y2, z2; + Color c; +}; + +struct SlabModel +{ + int Count; + Slab* pSlabs; + BuiltinTexture tex; +}; + +Slab FloorSlabs[] = +{ + // Floor + { -10.0f, -0.1f, -20.0f, 10.0f, 0.0f, 20.1f, Color(128,128,128) } +}; + +SlabModel Floor = {sizeof(FloorSlabs)/sizeof(Slab), FloorSlabs, Tex_Checker}; + +Slab CeilingSlabs[] = +{ + { -10.0f, 4.0f, -20.0f, 10.0f, 4.1f, 20.1f, Color(128,128,128) } +}; + +SlabModel Ceiling = {sizeof(FloorSlabs)/sizeof(Slab), CeilingSlabs, Tex_Panel}; + +Slab RoomSlabs[] = +{ + // Left Wall + { -10.1f, 0.0f, -20.0f, -10.0f, 4.0f, 20.0f, Color(128,128,128) }, + // Back Wall + { -10.0f, -0.1f, -20.1f, 10.0f, 4.0f, -20.0f, Color(128,128,128) }, + + // Right Wall + { 10.0f, -0.1f, -20.0f, 10.1f, 4.0f, 20.0f, Color(128,128,128) }, +}; + +SlabModel Room = {sizeof(RoomSlabs)/sizeof(Slab), RoomSlabs, Tex_Block}; + +Slab FixtureSlabs[] = +{ + // Right side shelf + { 9.5f, 0.75f, 3.0f, 10.1f, 2.5f, 3.1f, Color(128,128,128) }, // Verticals + { 9.5f, 0.95f, 3.7f, 10.1f, 2.75f, 3.8f, Color(128,128,128) }, + { 9.5f, 1.20f, 2.5f, 10.1f, 1.30f, 3.8f, Color(128,128,128) }, // Horizontals + { 9.5f, 2.00f, 3.0f, 10.1f, 2.10f, 4.2f, Color(128,128,128) }, + + // Right railing + { 5.0f, 1.1f, 20.0f, 10.0f, 1.2f, 20.1f, Color(128,128,128) }, + // Bars + { 9.0f, 1.1f, 20.0f, 9.1f, 0.0f, 20.1f, Color(128,128,128) }, + { 8.0f, 1.1f, 20.0f, 8.1f, 0.0f, 20.1f, Color(128,128,128) }, + { 7.0f, 1.1f, 20.0f, 7.1f, 0.0f, 20.1f, Color(128,128,128) }, + { 6.0f, 1.1f, 20.0f, 6.1f, 0.0f, 20.1f, Color(128,128,128) }, + { 5.0f, 1.1f, 20.0f, 5.1f, 0.0f, 20.1f, Color(128,128,128) }, + + // Left railing + { -10.0f, 1.1f, 20.0f, -5.0f, 1.2f, 20.1f, Color(128,128,128) }, + // Bars + { -9.0f, 1.1f, 20.0f, -9.1f, 0.0f, 20.1f, Color(128,128,128) }, + { -8.0f, 1.1f, 20.0f, -8.1f, 0.0f, 20.1f, Color(128,128,128) }, + { -7.0f, 1.1f, 20.0f, -7.1f, 0.0f, 20.1f, Color(128,128,128) }, + { -6.0f, 1.1f, 20.0f, -6.1f, 0.0f, 20.1f, Color(128,128,128) }, + { -5.0f, 1.1f, 20.0f, -5.1f, 0.0f, 20.1f, Color(128,128,128) }, + + // Bottom Floor 2 + { -15.0f, -6.1f, 18.0f, 15.0f, -6.0f, 30.0f, Color(128,128,128) }, +}; + +SlabModel Fixtures = {sizeof(FixtureSlabs)/sizeof(Slab), FixtureSlabs}; + +Slab FurnitureSlabs[] = +{ + // Table + { -1.8f, 0.7f, 1.0f, 0.0f, 0.8f, 0.0f, Color(128,128,88) }, + { -1.8f, 0.7f, 0.0f, -1.8f+0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 1 + { -1.8f, 0.7f, 1.0f, -1.8f+0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2 + { 0.0f, 0.7f, 1.0f, 0.0f-0.1f, 0.0f, 1.0f-0.1f, Color(128,128,88) }, // Leg 2 + { 0.0f, 0.7f, 0.0f, 0.0f-0.1f, 0.0f, 0.0f+0.1f, Color(128,128,88) }, // Leg 2 + + // Chair + { -1.4f, 0.5f, -1.1f, -0.8f, 0.55f, -0.5f, Color(88,88,128) }, // Set + { -1.4f, 1.0f, -1.1f, -1.4f+0.06f, 0.0f, -1.1f+0.06f, Color(88,88,128) }, // Leg 1 + { -1.4f, 0.5f, -0.5f, -1.4f+0.06f, 0.0f, -0.5f-0.06f, Color(88,88,128) }, // Leg 2 + { -0.8f, 0.5f, -0.5f, -0.8f-0.06f, 0.0f, -0.5f-0.06f, Color(88,88,128) }, // Leg 2 + { -0.8f, 1.0f, -1.1f, -0.8f-0.06f, 0.0f, -1.1f+0.06f, Color(88,88,128) }, // Leg 2 + { -1.4f, 0.97f,-1.05f,-0.8f, 0.92f, -1.10f, Color(88,88,128) }, // Back high bar +}; + +SlabModel Furniture = {sizeof(FurnitureSlabs)/sizeof(Slab), FurnitureSlabs}; + +Slab PostsSlabs[] = +{ + // Posts + { 0, 0.0f, 0.0f, 0.1f, 1.3f, 0.1f, Color(128,128,128) }, + { 0, 0.0f, 0.4f, 0.1f, 1.3f, 0.5f, Color(128,128,128) }, + { 0, 0.0f, 0.8f, 0.1f, 1.3f, 0.9f, Color(128,128,128) }, + { 0, 0.0f, 1.2f, 0.1f, 1.3f, 1.3f, Color(128,128,128) }, + { 0, 0.0f, 1.6f, 0.1f, 1.3f, 1.7f, Color(128,128,128) }, + { 0, 0.0f, 2.0f, 0.1f, 1.3f, 2.1f, Color(128,128,128) }, + { 0, 0.0f, 2.4f, 0.1f, 1.3f, 2.5f, Color(128,128,128) }, + { 0, 0.0f, 2.8f, 0.1f, 1.3f, 2.9f, Color(128,128,128) }, + { 0, 0.0f, 3.2f, 0.1f, 1.3f, 3.3f, Color(128,128,128) }, + { 0, 0.0f, 3.6f, 0.1f, 1.3f, 3.7f, Color(128,128,128) }, +}; + +SlabModel Posts = {sizeof(PostsSlabs)/sizeof(Slab), PostsSlabs}; + + +// Temporary helper class used to initialize fills used by model. +class FillCollection +{ +public: + Ptr<ShaderFill> LitSolid; + Ptr<ShaderFill> LitTextures[4]; + + FillCollection(RenderDevice* render); + +}; + +FillCollection::FillCollection(RenderDevice* render) +{ + Ptr<Texture> builtinTextures[Tex_Count]; + + // Create floor checkerboard texture. + { + Color checker[256*256]; + for (int j = 0; j < 256; j++) + for (int i = 0; i < 256; i++) + checker[j*256+i] = (((i/4 >> 5) ^ (j/4 >> 5)) & 1) ? + Color(180,180,180,255) : Color(80,80,80,255); + builtinTextures[Tex_Checker] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, checker); + builtinTextures[Tex_Checker]->SetSampleMode(Sample_Anisotropic|Sample_Repeat); + } + + // Ceiling panel texture. + { + Color panel[256*256]; + for (int j = 0; j < 256; j++) + for (int i = 0; i < 256; i++) + panel[j*256+i] = (i/4 == 0 || j/4 == 0) ? + Color(80,80,80,255) : Color(180,180,180,255); + builtinTextures[Tex_Panel] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, panel); + builtinTextures[Tex_Panel]->SetSampleMode(Sample_Anisotropic|Sample_Repeat); + } + + // Wall brick textures. + { + Color block[256*256]; + for (int j = 0; j < 256; j++) + for (int i = 0; i < 256; i++) + block[j*256+i] = (((j/4 & 15) == 0) || (((i/4 & 15) == 0) && ((((i/4 & 31) == 0) ^ ((j/4 >> 4) & 1)) == 0))) ? + Color(60,60,60,255) : Color(180,180,180,255); + builtinTextures[Tex_Block] = *render->CreateTexture(Texture_RGBA|Texture_GenMipmaps, 256, 256, block); + builtinTextures[Tex_Block]->SetSampleMode(Sample_Anisotropic|Sample_Repeat); + } + + LitSolid = *new ShaderFill(*render->CreateShaderSet()); + LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP)); + LitSolid->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitGouraud)); + + for (int i = 1; i < Tex_Count; i++) + { + LitTextures[i] = *new ShaderFill(*render->CreateShaderSet()); + LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Vertex, VShader_MVP)); + LitTextures[i]->GetShaders()->SetShader(render->LoadBuiltinShader(Shader_Fragment, FShader_LitTexture)); + LitTextures[i]->SetTexture(0, builtinTextures[i]); + } + +} + + + +// Helper function to create a model out of Slab arrays. +Model* CreateModel(Vector3f pos, SlabModel* sm, const FillCollection& fills) +{ + Model* m = new Model(Prim_Triangles); + m->SetPosition(pos); + + for(int i=0; i< sm->Count; i++) + { + Slab &s = sm->pSlabs[i]; + m->AddSolidColorBox(s.x1, s.y1, s.z1, s.x2, s.y2, s.z2, s.c); + } + + if (sm->tex > 0) + m->Fill = fills.LitTextures[sm->tex]; + else + m->Fill = fills.LitSolid; + return m; +} + + +// Adds sample models and lights to the argument scene. +void PopulateRoomScene(Scene* scene, RenderDevice* render) +{ + FillCollection fills(render); + + scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Room, fills))); + scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Floor, fills))); + scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Ceiling, fills))); + scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Fixtures, fills))); + scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,0), &Furniture, fills))); + scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(0,0,4), &Furniture, fills))); + scene->World.Add(Ptr<Model>(*CreateModel(Vector3f(-3,0,3), &Posts, fills))); + + + scene->SetAmbient(Vector4f(0.65f,0.65f,0.65f,1)); + scene->AddLight(Vector3f(-2,4,-2), Vector4f(8,8,8,1)); + scene->AddLight(Vector3f(3,4,-3), Vector4f(2,1,1,1)); + scene->AddLight(Vector3f(-4,3,25), Vector4f(3,6,3,1)); +} + |