diff options
Diffstat (limited to 'Alc/ALu.c')
-rw-r--r-- | Alc/ALu.c | 140 |
1 files changed, 65 insertions, 75 deletions
@@ -416,8 +416,8 @@ static __inline ALint aluCart2LUTpos(ALfloat re, ALfloat im) static ALvoid CalcSourceParams(const ALCcontext *ALContext, const ALsource *ALSource, ALenum isMono, ALfloat *drysend, ALfloat *wetsend, - ALfloat *pitch, ALfloat *drygainhf, - ALfloat *wetgainhf) + ALfloat *pitch, FILTER *DryFilter, + FILTER *WetFilter[MAX_SENDS]) { ALfloat InnerAngle,OuterAngle,Angle,Distance,DryMix; ALfloat Direction[3],Position[3],SourceToListener[3]; @@ -431,17 +431,21 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, ALfloat MetersPerUnit; ALfloat RoomRolloff[MAX_SENDS]; ALfloat DryGainHF = 1.0f; + ALfloat WetGainHF[MAX_SENDS]; ALfloat DirGain, AmbientGain; ALfloat length; const ALfloat *SpeakerGain; + ALuint Frequency; ALint NumSends; ALint pos, s, i; + ALfloat cw, a, g; //Get context properties DopplerFactor = ALContext->DopplerFactor * ALSource->DopplerFactor; DopplerVelocity = ALContext->DopplerVelocity; flSpeedOfSound = ALContext->flSpeedOfSound; NumSends = ALContext->Device->NumAuxSends; + Frequency = ALContext->Device->Frequency; //Get listener properties ListenerGain = ALContext->Listener.Gain; @@ -487,13 +491,25 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, drysend[FRONT_CENTER] = DryMix * ListenerGain; drysend[BACK_CENTER] = DryMix * ListenerGain; drysend[LFE] = DryMix * ListenerGain; - *drygainhf = DryGainHF; - for(i = 0;i < MAX_SENDS;i++) - { wetsend[i] = 0.0f; - wetgainhf[i] = 1.0f; - } + + /* Update filter coefficients. Calculations based on the I3DL2 + * spec. */ + cw = cos(2.0*M_PI * LOWPASSFREQCUTOFF / Frequency); + /* We use two chained one-pole filters, so we need to take the + * square root of the squared gain, which is the same as the base + * gain. */ + g = __max(DryGainHF, 0.01f); + a = 0.0f; + /* Be careful with gains < 0.0001, as that causes the coefficient + * head towards 1, which will flatten the signal */ + if(g < 0.9999f) /* 1-epsilon */ + a = (1 - g*cw - aluSqrt(2*g*(1-cw) - g*g*(1 - cw*cw))) / + (1 - g); + DryFilter->coeff = a; + for(i = 0;i < MAX_SENDS;i++) + WetFilter[i]->coeff = 0.0f; return; } @@ -617,7 +633,7 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, ALfloat WetMix = SourceVolume * RoomAttenuation[i]; WetMix = __min(WetMix,MaxVolume); wetsend[i] = __max(WetMix,MinVolume); - wetgainhf[i] = 1.0f; + WetGainHF[i] = 1.0f; } // Distance-based air absorption @@ -634,7 +650,7 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, absorb = pow(10.0, absorb/20.0); DryGainHF *= absorb; for(i = 0;i < MAX_SENDS;i++) - wetgainhf[i] *= absorb; + WetGainHF[i] *= absorb; } //3. Apply directional soundcones @@ -699,7 +715,7 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, if(ALSource->WetGainAuto) wetsend[i] *= ConeVolume; if(ALSource->WetGainHFAuto) - wetgainhf[i] *= ConeHF; + WetGainHF[i] *= ConeHF; if(ALSource->Send[i].Slot->AuxSendAuto) { @@ -713,14 +729,14 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, // the effect slot is the same as the dry path, sans filter // effects wetsend[i] = DryMix; - wetgainhf[i] = DryGainHF; + WetGainHF[i] = DryGainHF; } switch(ALSource->Send[i].WetFilter.type) { case AL_FILTER_LOWPASS: wetsend[i] *= ALSource->Send[i].WetFilter.Gain; - wetgainhf[i] *= ALSource->Send[i].WetFilter.GainHF; + WetGainHF[i] *= ALSource->Send[i].WetFilter.GainHF; break; } wetsend[i] *= ListenerGain; @@ -728,13 +744,13 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, else { wetsend[i] = 0.0f; - wetgainhf[i] = 1.0f; + WetGainHF[i] = 1.0f; } } for(i = NumSends;i < MAX_SENDS;i++) { wetsend[i] = 0.0f; - wetgainhf[i] = 1.0f; + WetGainHF[i] = 1.0f; } //5. Apply filter gains and filters @@ -771,7 +787,30 @@ static ALvoid CalcSourceParams(const ALCcontext *ALContext, ALfloat gain = SpeakerGain[s]*DirGain + AmbientGain; drysend[s] = DryMix * gain; } - *drygainhf = DryGainHF; + + /* Update filter coefficients. */ + cw = cos(2.0*M_PI * LOWPASSFREQCUTOFF / Frequency); + /* Spatialized sources use four chained one-pole filters, so we need to + * take the fourth root of the squared gain, which is the same as the + * square root of the base gain. */ + g = aluSqrt(__max(DryGainHF, 0.0001f)); + a = 0.0f; + if(g < 0.9999f) /* 1-epsilon */ + a = (1 - g*cw - aluSqrt(2*g*(1-cw) - g*g*(1 - cw*cw))) / + (1 - g); + DryFilter->coeff = a; + + for(i = 0;i < NumSends;i++) + { + /* The wet path uses two chained one-pole filters, so take the + * base gain (square root of the squared gain) */ + g = __max(WetGainHF[i], 0.01f); + a = 0.0f; + if(g < 0.9999f) /* 1-epsilon */ + a = (1 - g*cw - aluSqrt(2*g*(1-cw) - g*g*(1 - cw*cw))) / + (1 - g); + WetFilter[i]->coeff = a; + } } static __inline ALshort lerp(ALshort val1, ALshort val2, ALint frac) @@ -795,8 +834,6 @@ static void MixSomeSources(ALCcontext *ALContext, float (*DryBuffer)[OUTPUTCHANN ALint64 DataSize64,DataPos64; FILTER *DryFilter, *WetFilter[MAX_SENDS]; ALfloat WetSend[MAX_SENDS]; - ALfloat DryGainHF = 0.0f; - ALfloat WetGainHF[MAX_SENDS]; ALuint rampLength; ALuint frequency; ALint Looping,State; @@ -851,69 +888,22 @@ another_source: } CalcSourceParams(ALContext, ALSource, (Channels==1)?AL_TRUE:AL_FALSE, - DrySend, WetSend, &Pitch, &DryGainHF, WetGainHF); + DrySend, WetSend, &Pitch, DryFilter, WetFilter); Pitch = (Pitch*ALBuffer->frequency) / frequency; - if(Channels == 1) + if(DuplicateStereo && Channels == 2) { - ALfloat cw, a, g; - - /* Update filter coefficients. Calculations based on the I3DL2 - * spec. */ - cw = cos(2.0*M_PI * LOWPASSFREQCUTOFF / frequency); - /* We use four chained one-pole filters, so we need to take the - * fourth root of the squared gain, which is the same as the square - * root of the base gain. */ - /* Be careful with gains < 0.0001, as that causes the coefficient - * head towards 1, which will flatten the signal */ - g = aluSqrt(__max(DryGainHF, 0.0001f)); - a = 0.0f; - if(g < 0.9999f) /* 1-epsilon */ - a = (1 - g*cw - aluSqrt(2*g*(1-cw) - g*g*(1 - cw*cw))) / - (1 - g); - DryFilter->coeff = a; - - for(i = 0;i < MAX_SENDS;i++) - { - /* The wet path uses two chained one-pole filters, so take the - * base gain (square root of the squared gain) */ - g = __max(WetGainHF[i], 0.01f); - a = 0.0f; - if(g < 0.9999f) /* 1-epsilon */ - a = (1 - g*cw - aluSqrt(2*g*(1-cw) - g*g*(1 - cw*cw))) / - (1 - g); - WetFilter[i]->coeff = a; - } + Matrix[FRONT_LEFT][SIDE_LEFT] = 1.0f; + Matrix[FRONT_RIGHT][SIDE_RIGHT] = 1.0f; + Matrix[FRONT_LEFT][BACK_LEFT] = 1.0f; + Matrix[FRONT_RIGHT][BACK_RIGHT] = 1.0f; } - else + else if(DuplicateStereo) { - ALfloat cw, a, g; - - /* Multi-channel sources use two chained one-pole filters */ - cw = cos(2.0*M_PI * LOWPASSFREQCUTOFF / frequency); - g = __max(DryGainHF, 0.01f); - a = 0.0f; - if(g < 0.9999f) /* 1-epsilon */ - a = (1 - g*cw - aluSqrt(2*g*(1-cw) - g*g*(1 - cw*cw))) / - (1 - g); - DryFilter->coeff = a; - for(i = 0;i < MAX_SENDS;i++) - WetFilter[i]->coeff = 0.0f; - - if(DuplicateStereo && Channels == 2) - { - Matrix[FRONT_LEFT][SIDE_LEFT] = 1.0f; - Matrix[FRONT_RIGHT][SIDE_RIGHT] = 1.0f; - Matrix[FRONT_LEFT][BACK_LEFT] = 1.0f; - Matrix[FRONT_RIGHT][BACK_RIGHT] = 1.0f; - } - else if(DuplicateStereo) - { - Matrix[FRONT_LEFT][SIDE_LEFT] = 0.0f; - Matrix[FRONT_RIGHT][SIDE_RIGHT] = 0.0f; - Matrix[FRONT_LEFT][BACK_LEFT] = 0.0f; - Matrix[FRONT_RIGHT][BACK_RIGHT] = 0.0f; - } + Matrix[FRONT_LEFT][SIDE_LEFT] = 0.0f; + Matrix[FRONT_RIGHT][SIDE_RIGHT] = 0.0f; + Matrix[FRONT_LEFT][BACK_LEFT] = 0.0f; + Matrix[FRONT_RIGHT][BACK_RIGHT] = 0.0f; } /* Compute the gain steps for each output channel */ |