diff options
Diffstat (limited to 'alsoftrc.sample')
| -rw-r--r-- | alsoftrc.sample | 64 |
1 files changed, 35 insertions, 29 deletions
diff --git a/alsoftrc.sample b/alsoftrc.sample index efebc469..2a62c360 100644 --- a/alsoftrc.sample +++ b/alsoftrc.sample @@ -8,6 +8,12 @@ # specifying "$HOME/file.ext" would typically result in something like # "/home/user/file.ext". To specify an actual "$" character, use "$$". # +# Device-specific values may be specified by including the device name in the +# block name, with "general" replaced by the device name. That is, general +# options for the device "Name of Device" would be in the [Name of Device] +# block, while ALSA options would be in the [Name of Device/alsa] block. +# Options marked as "(global)" are not influenced by the device. +# # The system-wide settings can be put in /etc/openal/alsoft.conf and user- # specific override settings in $HOME/.alsoftrc. # For Windows, these settings should go into $AppData\alsoft.ini @@ -22,7 +28,7 @@ ## [general] -## disable-cpu-exts: +## disable-cpu-exts: (global) # Disables use of specialized methods that use specific CPU intrinsics. # Certain methods may utilize CPU extensions for improved performance, and # this option is useful for preventing some or all of those methods from being @@ -30,7 +36,7 @@ # 'all' disables use of all such specialized methods. #disable-cpu-exts = -## drivers: +## drivers: (global) # Sets the backend driver list order, comma-seperated. Unknown backends and # duplicated names are ignored. Unlisted backends won't be considered for use # unless the list is ended with a comma (e.g. 'oss,' will try OSS first before @@ -74,7 +80,7 @@ # range between 2 and 16. #periods = 4 -## stereo-mode +## stereo-mode: # Specifies if stereo output is treated as being headphones or speakers. With # headphones, HRTF or crossfeed filters may be used for better audio quality. # Valid settings are auto, speakers, and headphones. @@ -89,7 +95,7 @@ # when using headphones. #hrtf = -## hrtf_tables +## hrtf_tables: (global) # Specifies a comma-separated list of files containing HRTF data sets. The # format of the files are described in hrtf.txt. The filenames may contain # these markers, which will be replaced as needed: @@ -118,7 +124,7 @@ # stereo modes. #cf_level = 0 -## resampler: +## resampler: (global) # Selects the resampler used when mixing sources. Valid values are: # point - nearest sample, no interpolation # linear - extrapolates samples using a linear slope between samples @@ -126,7 +132,7 @@ # Specifying other values will result in using the default (linear). #resampler = linear -## rt-prio: +## rt-prio: (global) # Sets real-time priority for the mixing thread. Not all drivers may use this # (eg. PortAudio) as they already control the priority of the mixing thread. # 0 and negative values will disable it. Note that this may constitute a @@ -153,14 +159,14 @@ # possible is 4. #sends = -## excludefx: +## excludefx: (global) # Sets which effects to exclude, preventing apps from using them. This can # help for apps that try to use effects which are too CPU intensive for the # system to handle. Available effects are: eaxreverb,reverb,autowah,chorus, # compressor,distortion,echo,equalizer,flanger,modulator,dedicated #excludefx = -## default-reverb: +## default-reverb: (global) # A reverb preset that applies by default to all sources on send 0 # (applications that set their own slots on send 0 will override this). # Available presets are: None, Generic, PaddedCell, Room, Bathroom, @@ -169,13 +175,13 @@ # Quarry, Plain, ParkingLot, SewerPipe, Underwater, Drugged, Dizzy, Psychotic. #default-reverb = -## trap-alc-error: +## trap-alc-error: (global) # Generates a SIGTRAP signal when an ALC device error is generated, on systems # that support it. This helps when debugging, while trying to find the cause # of a device error. On Windows, a breakpoint exception is generated. #trap-alc-error = false -## trap-al-error: +## trap-al-error: (global) # Generates a SIGTRAP signal when an AL context error is generated, on systems # that support it. This helps when debugging, while trying to find the cause # of a context error. On Windows, a breakpoint exception is generated. @@ -186,7 +192,7 @@ ## [midi] -## soundfont: +## soundfont: (global) # A default soundfont (sf2 format). Used when an app requests the system # default. The listed file is relative to system-dependant data directories. # On Windows this is: @@ -197,7 +203,7 @@ # An absolute path may also be specified, if the given file is elsewhere. #soundfont = -## volume: +## volume: (global) # Additional attenuation applied to MIDI output, expressed in decibels. This # is used to help keep the mix from clipping, and so must be 0 or less. The # value is logarithmic, so -6 will be about half amplitude, and -12 about @@ -209,14 +215,14 @@ ## [reverb] -## boost: +## boost: (global) # A global amplification for reverb output, expressed in decibels. The value # is logarithmic, so +6 will be a scale of (approximately) 2x, +12 will be a # scale of 4x, etc. Similarly, -6 will be about half, and -12 about 1/4th. A # value of 0 means no change. #boost = 0 -## emulate-eax: +## emulate-eax: (global) # Allows the standard reverb effect to be used in place of EAX reverb. EAX # reverb processing is a bit more CPU intensive than standard, so this option # allows a simpler effect to be used at the loss of some quality. @@ -227,13 +233,13 @@ ## [pulse] -## spawn-server: +## spawn-server: (global) # Attempts to autospawn a PulseAudio server whenever needed (initializing the # backend, enumerating devices, etc). Setting autospawn to false in Pulse's # client.conf will still prevent autospawning even if this is set to true. #spawn-server = true -## allow-moves: +## allow-moves: (global) # Allows PulseAudio to move active streams to different devices. Note that the # device specifier (seen by applications) will not be updated when this # occurs, and neither will the AL device configuration (sample rate, format, @@ -245,34 +251,34 @@ ## [alsa] -## device: +## device: (global) # Sets the device name for the default playback device. #device = default -## device-prefix: +## device-prefix: (global) # Sets the prefix used by the discovered (non-default) playback devices. This # will be appended with "CARD=c,DEV=d", where c is the card id and d is the # device index for the requested device name. #device-prefix = plughw: -## device-prefix-*: +## device-prefix-*: (global) # Card- and device-specific prefixes may be used to override the device-prefix # option. The option may specify the card id (eg, device-prefix-NVidia), or # the card id and device index (eg, device-prefix-NVidia-0). The card id is # case-sensitive. #device-prefix- = -## capture: +## capture: (global) # Sets the device name for the default capture device. #capture = default -## capture-prefix: +## capture-prefix: (global) # Sets the prefix used by the discovered (non-default) capture devices. This # will be appended with "CARD=c,DEV=d", where c is the card id and d is the # device number for the requested device name. #capture-prefix = plughw: -## capture-prefix-*: +## capture-prefix-*: (global) # Card- and device-specific prefixes may be used to override the # capture-prefix option. The option may specify the card id (eg, # capture-prefix-NVidia), or the card id and device index (eg, @@ -291,11 +297,11 @@ ## [oss] -## device: +## device: (global) # Sets the device name for OSS output. #device = /dev/dsp -## capture: +## capture: (global) # Sets the device name for OSS capture. #capture = /dev/dsp @@ -304,7 +310,7 @@ ## [solaris] -## device: +## device: (global) # Sets the device name for Solaris output. #device = /dev/audio @@ -318,7 +324,7 @@ ## [jack] -## spawn-server: +## spawn-server: (global) # Attempts to autospawn a JACK server whenever needed (initializing the # backend, opening devices, etc). #spawn-server = false @@ -352,12 +358,12 @@ ## [port] -## device: +## device: (global) # Sets the device index for output. Negative values will use the default as # given by PortAudio itself. #device = -1 -## capture: +## capture: (global) # Sets the device index for capture. Negative values will use the default as # given by PortAudio itself. #capture = -1 @@ -367,7 +373,7 @@ ## [wave] -## file: +## file: (global) # Sets the filename of the wave file to write to. An empty name prevents the # backend from opening, even when explicitly requested. # THIS WILL OVERWRITE EXISTING FILES WITHOUT QUESTION! |