#include "config.h"

#include <stdint.h>

#ifdef HAVE_SSE_INTRINSICS
#include <xmmintrin.h>
#endif

#include "alcmain.h"
#include "alcomplex.h"
#include "alcontext.h"
#include "almalloc.h"
#include "alspan.h"
#include "bformatdec.h"
#include "buffer_storage.h"
#include "core/ambidefs.h"
#include "core/filters/splitter.h"
#include "core/fmt_traits.h"
#include "core/logging.h"
#include "effects/base.h"
#include "effectslot.h"
#include "polyphase_resampler.h"


namespace {

/* Convolution reverb is implemented using a segmented overlap-add method. The
 * impulse response is broken up into multiple segments of 512 samples, and
 * each segment has an FFT applied with a 1024-sample buffer (the latter half
 * left silent) to get its frequency-domain response. The resulting response
 * has its positive/non-mirrored frequencies saved (513 bins) in each segment.
 *
 * Input samples are similarly broken up into 512-sample segments, with an FFT
 * applied to each new incoming segment to get its 513 bins. A history of FFT'd
 * input segments is maintained, equal to the length of the impulse response.
 *
 * To apply the reverberation, each impulse response segment is convolved with
 * its paired input segment (using complex multiplies, far cheaper than FIRs),
 * accumulating into a 1024-bin FFT buffer. The input history is then shifted
 * to align with later impulse response segments for next time.
 *
 * An inverse FFT is then applied to the accumulated FFT buffer to get a 1024-
 * sample time-domain response for output, which is split in two halves. The
 * first half is the 512-sample output, and the second half is a 512-sample
 * (really, 511) delayed extension, which gets added to the output next time.
 * Convolving two time-domain responses of lengths N and M results in a time-
 * domain signal of length N+M-1, and this holds true regardless of the
 * convolution being applied in the frequency domain, so these "overflow"
 * samples need to be accounted for.
 *
 * To avoid a delay with gathering enough input samples to apply an FFT with,
 * the first segment is applied directly in the time-domain as the samples come
 * in. Once enough have been retrieved, the FFT is applied on the input and
 * it's paired with the remaining (FFT'd) filter segments for processing.
 */


void LoadSamples(double *RESTRICT dst, const al::byte *src, const size_t srcstep, FmtType srctype,
    const size_t samples) noexcept
{
#define HANDLE_FMT(T)  case T: al::LoadSampleArray<T>(dst, src, srcstep, samples); break
    switch(srctype)
    {
    HANDLE_FMT(FmtUByte);
    HANDLE_FMT(FmtShort);
    HANDLE_FMT(FmtFloat);
    HANDLE_FMT(FmtDouble);
    HANDLE_FMT(FmtMulaw);
    HANDLE_FMT(FmtAlaw);
    }
#undef HANDLE_FMT
}


auto GetAmbiScales(AmbiScaling scaletype) noexcept -> const std::array<float,MaxAmbiChannels>&
{
    if(scaletype == AmbiScaling::FuMa) return AmbiScale::FromFuMa;
    if(scaletype == AmbiScaling::SN3D) return AmbiScale::FromSN3D;
    return AmbiScale::FromN3D;
}

auto GetAmbiLayout(AmbiLayout layouttype) noexcept -> const std::array<uint8_t,MaxAmbiChannels>&
{
    if(layouttype == AmbiLayout::FuMa) return AmbiIndex::FromFuMa;
    return AmbiIndex::FromACN;
}

auto GetAmbi2DLayout(AmbiLayout layouttype) noexcept -> const std::array<uint8_t,MaxAmbi2DChannels>&
{
    if(layouttype == AmbiLayout::FuMa) return AmbiIndex::FromFuMa2D;
    return AmbiIndex::FromACN2D;
}


struct ChanMap {
    Channel channel;
    float angle;
    float elevation;
};

using complex_d = std::complex<double>;

constexpr size_t ConvolveUpdateSize{256};
constexpr size_t ConvolveUpdateSamples{ConvolveUpdateSize / 2};


void apply_fir(al::span<float> dst, const float *RESTRICT src, const float *RESTRICT filter)
{
#ifdef HAVE_SSE_INTRINSICS
    for(float &output : dst)
    {
        __m128 r4{_mm_setzero_ps()};
        for(size_t j{0};j < ConvolveUpdateSamples;j+=4)
        {
            const __m128 coeffs{_mm_load_ps(&filter[j])};
            const __m128 s{_mm_loadu_ps(&src[j])};

            r4 = _mm_add_ps(r4, _mm_mul_ps(s, coeffs));
        }
        r4 = _mm_add_ps(r4, _mm_shuffle_ps(r4, r4, _MM_SHUFFLE(0, 1, 2, 3)));
        r4 = _mm_add_ps(r4, _mm_movehl_ps(r4, r4));
        output = _mm_cvtss_f32(r4);

        ++src;
    }

#else

    for(float &output : dst)
    {
        float ret{0.0f};
        for(size_t j{0};j < ConvolveUpdateSamples;++j)
            ret += src[j] * filter[j];
        output = ret;
        ++src;
    }
#endif
}

struct ConvolutionState final : public EffectState {
    FmtChannels mChannels{};
    AmbiLayout mAmbiLayout{};
    AmbiScaling mAmbiScaling{};
    uint mAmbiOrder{};

    size_t mFifoPos{0};
    std::array<float,ConvolveUpdateSamples*2> mInput{};
    al::vector<std::array<float,ConvolveUpdateSamples>,16> mFilter;
    al::vector<std::array<float,ConvolveUpdateSamples*2>,16> mOutput;

    alignas(16) std::array<complex_d,ConvolveUpdateSize> mFftBuffer{};

    size_t mCurrentSegment{0};
    size_t mNumConvolveSegs{0};

    struct ChannelData {
        alignas(16) FloatBufferLine mBuffer{};
        float mHfScale{};
        BandSplitter mFilter{};
        float Current[MAX_OUTPUT_CHANNELS]{};
        float Target[MAX_OUTPUT_CHANNELS]{};
    };
    using ChannelDataArray = al::FlexArray<ChannelData>;
    std::unique_ptr<ChannelDataArray> mChans;
    std::unique_ptr<complex_d[]> mComplexData;


    ConvolutionState() = default;
    ~ConvolutionState() override = default;

    void NormalMix(const al::span<FloatBufferLine> samplesOut, const size_t samplesToDo);
    void UpsampleMix(const al::span<FloatBufferLine> samplesOut, const size_t samplesToDo);
    void (ConvolutionState::*mMix)(const al::span<FloatBufferLine>,const size_t)
    {&ConvolutionState::NormalMix};

    void deviceUpdate(const ALCdevice *device) override;
    void setBuffer(const ALCdevice *device, const BufferStorage *buffer) override;
    void update(const ALCcontext *context, const EffectSlot *slot, const EffectProps *props,
        const EffectTarget target) override;
    void process(const size_t samplesToDo, const al::span<const FloatBufferLine> samplesIn,
        const al::span<FloatBufferLine> samplesOut) override;

    DEF_NEWDEL(ConvolutionState)
};

void ConvolutionState::NormalMix(const al::span<FloatBufferLine> samplesOut,
    const size_t samplesToDo)
{
    for(auto &chan : *mChans)
        MixSamples({chan.mBuffer.data(), samplesToDo}, samplesOut, chan.Current, chan.Target,
            samplesToDo, 0);
}

void ConvolutionState::UpsampleMix(const al::span<FloatBufferLine> samplesOut,
    const size_t samplesToDo)
{
    for(auto &chan : *mChans)
    {
        const al::span<float> src{chan.mBuffer.data(), samplesToDo};
        chan.mFilter.processHfScale(src, chan.mHfScale);
        MixSamples(src, samplesOut, chan.Current, chan.Target, samplesToDo, 0);
    }
}


void ConvolutionState::deviceUpdate(const ALCdevice* /*device*/)
{
}

void ConvolutionState::setBuffer(const ALCdevice *device, const BufferStorage *buffer)
{
    constexpr uint MaxConvolveAmbiOrder{1u};

    mFifoPos = 0;
    mInput.fill(0.0f);
    decltype(mFilter){}.swap(mFilter);
    decltype(mOutput){}.swap(mOutput);
    mFftBuffer.fill(complex_d{});

    mCurrentSegment = 0;
    mNumConvolveSegs = 0;

    mChans = nullptr;
    mComplexData = nullptr;

    /* An empty buffer doesn't need a convolution filter. */
    if(!buffer || buffer->mSampleLen < 1) return;

    constexpr size_t m{ConvolveUpdateSize/2 + 1};
    auto bytesPerSample = BytesFromFmt(buffer->mType);
    auto realChannels = ChannelsFromFmt(buffer->mChannels, buffer->mAmbiOrder);
    auto numChannels = ChannelsFromFmt(buffer->mChannels,
        minu(buffer->mAmbiOrder, MaxConvolveAmbiOrder));

    mChans = ChannelDataArray::Create(numChannels);

    /* The impulse response needs to have the same sample rate as the input and
     * output. The bsinc24 resampler is decent, but there is high-frequency
     * attenation that some people may be able to pick up on. Since this is
     * called very infrequently, go ahead and use the polyphase resampler.
     */
    PPhaseResampler resampler;
    if(device->Frequency != buffer->mSampleRate)
        resampler.init(buffer->mSampleRate, device->Frequency);
    const auto resampledCount = static_cast<ALuint>(
        (uint64_t{buffer->mSampleLen}*device->Frequency + (buffer->mSampleRate-1)) /
        buffer->mSampleRate);

    const BandSplitter splitter{400.0f / static_cast<float>(device->Frequency)};
    for(auto &e : *mChans)
        e.mFilter = splitter;

    mFilter.resize(numChannels, {});
    mOutput.resize(numChannels, {});

    /* Calculate the number of segments needed to hold the impulse response and
     * the input history (rounded up), and allocate them. Exclude one segment
     * which gets applied as a time-domain FIR filter. Make sure at least one
     * segment is allocated to simplify handling.
     */
    mNumConvolveSegs = (resampledCount+(ConvolveUpdateSamples-1)) / ConvolveUpdateSamples;
    mNumConvolveSegs = maxz(mNumConvolveSegs, 2) - 1;

    const size_t complex_length{mNumConvolveSegs * m * (numChannels+1)};
    mComplexData = std::make_unique<complex_d[]>(complex_length);
    std::fill_n(mComplexData.get(), complex_length, complex_d{});

    mChannels = buffer->mChannels;
    mAmbiLayout = buffer->mAmbiLayout;
    mAmbiScaling = buffer->mAmbiScaling;
    mAmbiOrder = minu(buffer->mAmbiOrder, MaxConvolveAmbiOrder);

    auto srcsamples = std::make_unique<double[]>(maxz(buffer->mSampleLen, resampledCount));
    complex_d *filteriter = mComplexData.get() + mNumConvolveSegs*m;
    for(size_t c{0};c < numChannels;++c)
    {
        /* Load the samples from the buffer, and resample to match the device. */
        LoadSamples(srcsamples.get(), buffer->mData.data() + bytesPerSample*c, realChannels,
            buffer->mType, buffer->mSampleLen);
        if(device->Frequency != buffer->mSampleRate)
            resampler.process(buffer->mSampleLen, srcsamples.get(), resampledCount,
                srcsamples.get());

        /* Store the first segment's samples in reverse in the time-domain, to
         * apply as a FIR filter.
         */
        const size_t first_size{minz(resampledCount, ConvolveUpdateSamples)};
        std::transform(srcsamples.get(), srcsamples.get()+first_size, mFilter[c].rbegin(),
            [](const double d) noexcept -> float { return static_cast<float>(d); });

        size_t done{first_size};
        for(size_t s{0};s < mNumConvolveSegs;++s)
        {
            const size_t todo{minz(resampledCount-done, ConvolveUpdateSamples)};

            auto iter = std::copy_n(&srcsamples[done], todo, mFftBuffer.begin());
            done += todo;
            std::fill(iter, mFftBuffer.end(), complex_d{});

            forward_fft(mFftBuffer);
            filteriter = std::copy_n(mFftBuffer.cbegin(), m, filteriter);
        }
    }
}


void ConvolutionState::update(const ALCcontext *context, const EffectSlot *slot,
    const EffectProps* /*props*/, const EffectTarget target)
{
    /* NOTE: Stereo and Rear are slightly different from normal mixing (as
     * defined in alu.cpp). These are 45 degrees from center, rather than the
     * 30 degrees used there.
     *
     * TODO: LFE is not mixed to output. This will require each buffer channel
     * to have its own output target since the main mixing buffer won't have an
     * LFE channel (due to being B-Format).
     */
    static const ChanMap MonoMap[1]{
        { FrontCenter, 0.0f, 0.0f }
    }, StereoMap[2]{
        { FrontLeft,  Deg2Rad(-45.0f), Deg2Rad(0.0f) },
        { FrontRight, Deg2Rad( 45.0f), Deg2Rad(0.0f) }
    }, RearMap[2]{
        { BackLeft,  Deg2Rad(-135.0f), Deg2Rad(0.0f) },
        { BackRight, Deg2Rad( 135.0f), Deg2Rad(0.0f) }
    }, QuadMap[4]{
        { FrontLeft,  Deg2Rad( -45.0f), Deg2Rad(0.0f) },
        { FrontRight, Deg2Rad(  45.0f), Deg2Rad(0.0f) },
        { BackLeft,   Deg2Rad(-135.0f), Deg2Rad(0.0f) },
        { BackRight,  Deg2Rad( 135.0f), Deg2Rad(0.0f) }
    }, X51Map[6]{
        { FrontLeft,   Deg2Rad( -30.0f), Deg2Rad(0.0f) },
        { FrontRight,  Deg2Rad(  30.0f), Deg2Rad(0.0f) },
        { FrontCenter, Deg2Rad(   0.0f), Deg2Rad(0.0f) },
        { LFE, 0.0f, 0.0f },
        { SideLeft,    Deg2Rad(-110.0f), Deg2Rad(0.0f) },
        { SideRight,   Deg2Rad( 110.0f), Deg2Rad(0.0f) }
    }, X61Map[7]{
        { FrontLeft,   Deg2Rad(-30.0f), Deg2Rad(0.0f) },
        { FrontRight,  Deg2Rad( 30.0f), Deg2Rad(0.0f) },
        { FrontCenter, Deg2Rad(  0.0f), Deg2Rad(0.0f) },
        { LFE, 0.0f, 0.0f },
        { BackCenter,  Deg2Rad(180.0f), Deg2Rad(0.0f) },
        { SideLeft,    Deg2Rad(-90.0f), Deg2Rad(0.0f) },
        { SideRight,   Deg2Rad( 90.0f), Deg2Rad(0.0f) }
    }, X71Map[8]{
        { FrontLeft,   Deg2Rad( -30.0f), Deg2Rad(0.0f) },
        { FrontRight,  Deg2Rad(  30.0f), Deg2Rad(0.0f) },
        { FrontCenter, Deg2Rad(   0.0f), Deg2Rad(0.0f) },
        { LFE, 0.0f, 0.0f },
        { BackLeft,    Deg2Rad(-150.0f), Deg2Rad(0.0f) },
        { BackRight,   Deg2Rad( 150.0f), Deg2Rad(0.0f) },
        { SideLeft,    Deg2Rad( -90.0f), Deg2Rad(0.0f) },
        { SideRight,   Deg2Rad(  90.0f), Deg2Rad(0.0f) }
    };

    if(mNumConvolveSegs < 1)
        return;

    mMix = &ConvolutionState::NormalMix;

    for(auto &chan : *mChans)
        std::fill(std::begin(chan.Target), std::end(chan.Target), 0.0f);
    const float gain{slot->Gain};
    if(mChannels == FmtBFormat3D || mChannels == FmtBFormat2D)
    {
        ALCdevice *device{context->mDevice.get()};
        if(device->mAmbiOrder > mAmbiOrder)
        {
            mMix = &ConvolutionState::UpsampleMix;
            const auto scales = BFormatDec::GetHFOrderScales(mAmbiOrder, device->mAmbiOrder);
            (*mChans)[0].mHfScale = scales[0];
            for(size_t i{1};i < mChans->size();++i)
                (*mChans)[i].mHfScale = scales[1];
        }
        mOutTarget = target.Main->Buffer;

        const auto &scales = GetAmbiScales(mAmbiScaling);
        const uint8_t *index_map{(mChannels == FmtBFormat2D) ?
            GetAmbi2DLayout(mAmbiLayout).data() :
            GetAmbiLayout(mAmbiLayout).data()};

        std::array<float,MaxAmbiChannels> coeffs{};
        for(size_t c{0u};c < mChans->size();++c)
        {
            const size_t acn{index_map[c]};
            coeffs[acn] = scales[acn];
            ComputePanGains(target.Main, coeffs.data(), gain, (*mChans)[c].Target);
            coeffs[acn] = 0.0f;
        }
    }
    else
    {
        ALCdevice *device{context->mDevice.get()};
        al::span<const ChanMap> chanmap{};
        switch(mChannels)
        {
        case FmtMono: chanmap = MonoMap; break;
        case FmtStereo: chanmap = StereoMap; break;
        case FmtRear: chanmap = RearMap; break;
        case FmtQuad: chanmap = QuadMap; break;
        case FmtX51: chanmap = X51Map; break;
        case FmtX61: chanmap = X61Map; break;
        case FmtX71: chanmap = X71Map; break;
        case FmtBFormat2D:
        case FmtBFormat3D:
            break;
        }

        mOutTarget = target.Main->Buffer;
        if(device->mRenderMode == RenderMode::Pairwise)
        {
            auto ScaleAzimuthFront = [](float azimuth, float scale) -> float
            {
                const float abs_azi{std::fabs(azimuth)};
                if(!(abs_azi >= al::MathDefs<float>::Pi()*0.5f))
                    return std::copysign(minf(abs_azi*scale, al::MathDefs<float>::Pi()*0.5f), azimuth);
                return azimuth;
            };

            for(size_t i{0};i < chanmap.size();++i)
            {
                if(chanmap[i].channel == LFE) continue;
                const auto coeffs = CalcAngleCoeffs(ScaleAzimuthFront(chanmap[i].angle, 2.0f),
                    chanmap[i].elevation, 0.0f);
                ComputePanGains(target.Main, coeffs.data(), gain, (*mChans)[i].Target);
            }
        }
        else for(size_t i{0};i < chanmap.size();++i)
        {
            if(chanmap[i].channel == LFE) continue;
            const auto coeffs = CalcAngleCoeffs(chanmap[i].angle, chanmap[i].elevation, 0.0f);
            ComputePanGains(target.Main, coeffs.data(), gain, (*mChans)[i].Target);
        }
    }
}

void ConvolutionState::process(const size_t samplesToDo,
    const al::span<const FloatBufferLine> samplesIn, const al::span<FloatBufferLine> samplesOut)
{
    if(mNumConvolveSegs < 1)
        return;

    constexpr size_t m{ConvolveUpdateSize/2 + 1};
    size_t curseg{mCurrentSegment};
    auto &chans = *mChans;

    for(size_t base{0u};base < samplesToDo;)
    {
        const size_t todo{minz(ConvolveUpdateSamples-mFifoPos, samplesToDo-base)};

        std::copy_n(samplesIn[0].begin() + base, todo,
            mInput.begin()+ConvolveUpdateSamples+mFifoPos);

        /* Apply the FIR for the newly retrieved input samples, and combine it
         * with the inverse FFT'd output samples.
         */
        for(size_t c{0};c < chans.size();++c)
        {
            auto buf_iter = chans[c].mBuffer.begin() + base;
            apply_fir({std::addressof(*buf_iter), todo}, mInput.data()+1 + mFifoPos,
                mFilter[c].data());

            auto fifo_iter = mOutput[c].begin() + mFifoPos;
            std::transform(fifo_iter, fifo_iter+todo, buf_iter, buf_iter, std::plus<>{});
        }

        mFifoPos += todo;
        base += todo;

        /* Check whether the input buffer is filled with new samples. */
        if(mFifoPos < ConvolveUpdateSamples) break;
        mFifoPos = 0;

        /* Move the newest input to the front for the next iteration's history. */
        std::copy(mInput.cbegin()+ConvolveUpdateSamples, mInput.cend(), mInput.begin());

        /* Calculate the frequency domain response and add the relevant
         * frequency bins to the FFT history.
         */
        auto fftiter = std::copy_n(mInput.cbegin(), ConvolveUpdateSamples, mFftBuffer.begin());
        std::fill(fftiter, mFftBuffer.end(), complex_d{});
        forward_fft(mFftBuffer);

        std::copy_n(mFftBuffer.cbegin(), m, &mComplexData[curseg*m]);

        const complex_d *RESTRICT filter{mComplexData.get() + mNumConvolveSegs*m};
        for(size_t c{0};c < chans.size();++c)
        {
            std::fill_n(mFftBuffer.begin(), m, complex_d{});

            /* Convolve each input segment with its IR filter counterpart
             * (aligned in time).
             */
            const complex_d *RESTRICT input{&mComplexData[curseg*m]};
            for(size_t s{curseg};s < mNumConvolveSegs;++s)
            {
                for(size_t i{0};i < m;++i,++input,++filter)
                    mFftBuffer[i] += *input * *filter;
            }
            input = mComplexData.get();
            for(size_t s{0};s < curseg;++s)
            {
                for(size_t i{0};i < m;++i,++input,++filter)
                    mFftBuffer[i] += *input * *filter;
            }

            /* Reconstruct the mirrored/negative frequencies to do a proper
             * inverse FFT.
             */
            for(size_t i{m};i < ConvolveUpdateSize;++i)
                mFftBuffer[i] = std::conj(mFftBuffer[ConvolveUpdateSize-i]);

            /* Apply iFFT to get the 256 (really 255) samples for output. The
             * 128 output samples are combined with the last output's 127
             * second-half samples (and this output's second half is
             * subsequently saved for next time).
             */
            inverse_fft(mFftBuffer);

            /* The iFFT'd response is scaled up by the number of bins, so apply
             * the inverse to normalize the output.
             */
            for(size_t i{0};i < ConvolveUpdateSamples;++i)
                mOutput[c][i] =
                    static_cast<float>(mFftBuffer[i].real() * (1.0/double{ConvolveUpdateSize})) +
                    mOutput[c][ConvolveUpdateSamples+i];
            for(size_t i{0};i < ConvolveUpdateSamples;++i)
                mOutput[c][ConvolveUpdateSamples+i] =
                    static_cast<float>(mFftBuffer[ConvolveUpdateSamples+i].real() *
                        (1.0/double{ConvolveUpdateSize}));
        }

        /* Shift the input history. */
        curseg = curseg ? (curseg-1) : (mNumConvolveSegs-1);
    }
    mCurrentSegment = curseg;

    /* Finally, mix to the output. */
    (this->*mMix)(samplesOut, samplesToDo);
}


struct ConvolutionStateFactory final : public EffectStateFactory {
    EffectState *create() override { return new ConvolutionState{}; }
};

} // namespace

EffectStateFactory *ConvolutionStateFactory_getFactory()
{
    static ConvolutionStateFactory ConvolutionFactory{};
    return &ConvolutionFactory;
}