#ifndef FILTERS_BIQUAD_H
#define FILTERS_BIQUAD_H

#include <cmath>
#include <cstddef>
#include <utility>

#include "math_defs.h"


/* Filters implementation is based on the "Cookbook formulae for audio
 * EQ biquad filter coefficients" by Robert Bristow-Johnson
 * http://www.musicdsp.org/files/Audio-EQ-Cookbook.txt
 */
/* Implementation note: For the shelf and peaking filters, the specified gain
 * is for the centerpoint of the transition band. This better fits EFX filter
 * behavior, which expects the shelf's reference frequency to reach the given
 * gain. To set the gain for the shelf or peak itself, use the square root of
 * the desired linear gain (or halve the dB gain).
 */

enum class BiquadType {
    /** EFX-style low-pass filter, specifying a gain and reference frequency. */
    HighShelf,
    /** EFX-style high-pass filter, specifying a gain and reference frequency. */
    LowShelf,
    /** Peaking filter, specifying a gain and reference frequency. */
    Peaking,

    /** Low-pass cut-off filter, specifying a cut-off frequency. */
    LowPass,
    /** High-pass cut-off filter, specifying a cut-off frequency. */
    HighPass,
    /** Band-pass filter, specifying a center frequency. */
    BandPass,
};

template<typename Real>
class BiquadFilterR {
    /* Last two delayed components for direct form II. */
    Real mZ1{0.0f}, mZ2{0.0f};
    /* Transfer function coefficients "b" (numerator) */
    Real mB0{1.0f}, mB1{0.0f}, mB2{0.0f};
    /* Transfer function coefficients "a" (denominator; a0 is pre-applied). */
    Real mA1{0.0f}, mA2{0.0f};

public:
    void clear() noexcept { mZ1 = mZ2 = 0.0f; }

    /**
     * Sets the filter state for the specified filter type and its parameters.
     *
     * \param type The type of filter to apply.
     * \param gain The gain for the reference frequency response. Only used by
     *             the Shelf and Peaking filter types.
     * \param f0norm The reference frequency normal (ref_freq / sample_rate).
     *               This is the center point for the Shelf, Peaking, and
     *               BandPass filter types, or the cutoff frequency for the
     *               LowPass and HighPass filter types.
     * \param rcpQ The reciprocal of the Q coefficient for the filter's
     *             transition band. Can be generated from rcpQFromSlope or
     *             rcpQFromBandwidth as needed.
     */
    void setParams(BiquadType type, Real gain, Real f0norm, Real rcpQ);

    void copyParamsFrom(const BiquadFilterR &other)
    {
        mB0 = other.mB0;
        mB1 = other.mB1;
        mB2 = other.mB2;
        mA1 = other.mA1;
        mA2 = other.mA2;
    }


    void process(Real *dst, const Real *src, const size_t numsamples);

    /* Rather hacky. It's just here to support "manual" processing. */
    std::pair<Real,Real> getComponents() const noexcept { return {mZ1, mZ2}; }
    void setComponents(Real z1, Real z2) noexcept { mZ1 = z1; mZ2 = z2; }
    Real processOne(const Real in, Real &z1, Real &z2) const noexcept
    {
        Real out{in*mB0 + z1};
        z1 = in*mB1 - out*mA1 + z2;
        z2 = in*mB2 - out*mA2;
        return out;
    }

    /**
     * Calculates the rcpQ (i.e. 1/Q) coefficient for shelving filters, using
     * the reference gain and shelf slope parameter.
     * \param gain 0 < gain
     * \param slope 0 < slope <= 1
     */
    static Real rcpQFromSlope(Real gain, Real slope)
    { return std::sqrt((gain + 1.0f/gain)*(1.0f/slope - 1.0f) + 2.0f); }

    /**
     * Calculates the rcpQ (i.e. 1/Q) coefficient for filters, using the
     * normalized reference frequency and bandwidth.
     * \param f0norm 0 < f0norm < 0.5.
     * \param bandwidth 0 < bandwidth
     */
    static Real rcpQFromBandwidth(Real f0norm, Real bandwidth)
    {
        const Real w0{al::MathDefs<Real>::Tau() * f0norm};
        return 2.0f*std::sinh(std::log(Real{2.0f})/2.0f*bandwidth*w0/std::sin(w0));
    }
};

using BiquadFilter = BiquadFilterR<float>;

#endif /* FILTERS_BIQUAD_H */